@@ -2245,7 +2245,6 @@ F: Documentation/devicetree/bindings/spi/hpe,gxp-spifi.yaml
F: Documentation/devicetree/bindings/timer/hpe,gxp-timer.yaml
F: arch/arm/boot/dts/hpe-bmc*
F: arch/arm/boot/dts/hpe-gxp*
-F: arch/arm/mach-hpe/
F: drivers/clocksource/timer-gxp.c
F: drivers/hwmon/gxp-fan-ctrl.c
F: drivers/i2c/busses/i2c-gxp.c
@@ -377,8 +377,6 @@ source "arch/arm/mach-highbank/Kconfig"
source "arch/arm/mach-hisi/Kconfig"
-source "arch/arm/mach-hpe/Kconfig"
-
source "arch/arm/mach-imx/Kconfig"
source "arch/arm/mach-ixp4xx/Kconfig"
@@ -98,6 +98,31 @@ config ARCH_DIGICOLOR
select PINCTRL
select PINCTRL_DIGICOLOR
+menuconfig ARCH_HPE
+ bool "HPE SoC support"
+ depends on ARCH_MULTI_V7
+ help
+ This enables support for HPE ARM based BMC chips.
+
+if ARCH_HPE
+
+config ARCH_HPE_GXP
+ bool "HPE GXP SoC"
+ depends on ARCH_MULTI_V7
+ select ARM_VIC
+ select GENERIC_IRQ_CHIP
+ select CLKSRC_MMIO
+ help
+ HPE GXP is the name of the HPE Soc. This SoC is used to implement many
+ BMC features at HPE. It supports ARMv7 architecture based on the Cortex
+ A9 core. It is capable of using an AXI bus to which a memory controller
+ is attached. It has multiple SPI interfaces to connect boot flash and
+ BIOS flash. It uses a 10/100/1000 MAC for network connectivity. It
+ has multiple i2c engines to drive connectivity with a host
+ infrastructure.
+
+endif
+
menuconfig ARCH_MOXART
bool "MOXA ART SoC"
depends on ARCH_MULTI_V4
@@ -183,7 +183,6 @@ machine-$(CONFIG_ARCH_FOOTBRIDGE) += footbridge
machine-$(CONFIG_ARCH_GEMINI) += gemini
machine-$(CONFIG_ARCH_HIGHBANK) += highbank
machine-$(CONFIG_ARCH_HISI) += hisi
-machine-$(CONFIG_ARCH_HPE) += hpe
machine-$(CONFIG_ARCH_IXP4XX) += ixp4xx
machine-$(CONFIG_ARCH_KEYSTONE) += keystone
machine-$(CONFIG_ARCH_LPC18XX) += lpc18xx
deleted file mode 100644
@@ -1,23 +0,0 @@
-menuconfig ARCH_HPE
- bool "HPE SoC support"
- depends on ARCH_MULTI_V7
- help
- This enables support for HPE ARM based BMC chips.
-if ARCH_HPE
-
-config ARCH_HPE_GXP
- bool "HPE GXP SoC"
- depends on ARCH_MULTI_V7
- select ARM_VIC
- select GENERIC_IRQ_CHIP
- select CLKSRC_MMIO
- help
- HPE GXP is the name of the HPE Soc. This SoC is used to implement many
- BMC features at HPE. It supports ARMv7 architecture based on the Cortex
- A9 core. It is capable of using an AXI bus to which a memory controller
- is attached. It has multiple SPI interfaces to connect boot flash and
- BIOS flash. It uses a 10/100/1000 MAC for network connectivity. It
- has multiple i2c engines to drive connectivity with a host
- infrastructure.
-
-endif
deleted file mode 100644
@@ -1 +0,0 @@
-obj-$(CONFIG_ARCH_HPE_GXP) += gxp.o
deleted file mode 100644
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/* Copyright (C) 2022 Hewlett-Packard Enterprise Development Company, L.P. */
-
-#include <linux/of_platform.h>
-#include <asm/mach/arch.h>
-
-static const char * const gxp_board_dt_compat[] = {
- "hpe,gxp",
- NULL,
-};
-
-DT_MACHINE_START(GXP_DT, "HPE GXP")
- .dt_compat = gxp_board_dt_compat,
- .l2c_aux_val = 0,
- .l2c_aux_mask = ~0,
-MACHINE_END
Having a platform need a mach-* directory should be seen as a negative, it means the platform needs special non-standard handling. ARM64 support does not allow mach-* directories at all. While we may not get to that given all the non-standard architectures we support, we should still try to get as close as we can and reduce the number of mach directories. The mach-hpe/ directory and files, provides just one "feature": having the kernel print the machine name if the DTB does not also contain a "model" string (which they always do). To reduce the number of mach-* directories let's do without that feature and remove this directory. Signed-off-by: Andrew Davis <afd@ti.com> --- MAINTAINERS | 1 - arch/arm/Kconfig | 2 -- arch/arm/Kconfig.platforms | 25 +++++++++++++++++++++++++ arch/arm/Makefile | 1 - arch/arm/mach-hpe/Kconfig | 23 ----------------------- arch/arm/mach-hpe/Makefile | 1 - arch/arm/mach-hpe/gxp.c | 16 ---------------- 7 files changed, 25 insertions(+), 44 deletions(-) delete mode 100644 arch/arm/mach-hpe/Kconfig delete mode 100644 arch/arm/mach-hpe/Makefile delete mode 100644 arch/arm/mach-hpe/gxp.c