@@ -367,11 +367,13 @@ CONFIG_AT803X_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_ROCKCHIP_PHY=y
CONFIG_DP83867_PHY=y
+CONFIG_DP83TD510_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_CAN_FLEXCAN=m
CONFIG_CAN_RCAR=m
CONFIG_CAN_RCAR_CANFD=m
CONFIG_CAN_MCP251XFD=m
+CONFIG_MDIO_GPIO=y
CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y
CONFIG_MDIO_BUS_MUX_MMIOREG=y
CONFIG_USB_PEGASUS=m
@@ -418,6 +420,7 @@ CONFIG_TOUCHSCREEN_EDT_FT5X06=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PM8941_PWRKEY=y
CONFIG_INPUT_PM8XXX_VIBRATOR=m
+CONFIG_INPUT_TPS65219_PWRBUTTON=m
CONFIG_INPUT_PWM_BEEPER=m
CONFIG_INPUT_PWM_VIBRA=m
CONFIG_INPUT_HISI_POWERKEY=y
@@ -670,6 +673,7 @@ CONFIG_MFD_SPMI_PMIC=y
CONFIG_MFD_RK808=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SL28CPLD=y
+CONFIG_MFD_TPS65219=m
CONFIG_MFD_ROHM_BD718XX=y
CONFIG_MFD_WCD934X=m
CONFIG_REGULATOR_FIXED_VOLTAGE=y
@@ -699,6 +703,7 @@ CONFIG_REGULATOR_QCOM_SPMI=y
CONFIG_REGULATOR_RK808=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_TPS65132=m
+CONFIG_REGULATOR_TPS65219=m
CONFIG_REGULATOR_VCTRL=m
CONFIG_RC_CORE=m
CONFIG_RC_DECODERS=y
@@ -1026,6 +1031,7 @@ CONFIG_RTC_DRV_RK808=m
CONFIG_RTC_DRV_PCF85063=m
CONFIG_RTC_DRV_PCF85363=m
CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_BQ32K=m
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RV3028=m
CONFIG_RTC_DRV_RV8803=m
@@ -1045,6 +1051,7 @@ CONFIG_RTC_DRV_SNVS=m
CONFIG_RTC_DRV_IMX_SC=m
CONFIG_RTC_DRV_MT6397=m
CONFIG_RTC_DRV_XGENE=y
+CONFIG_RTC_DRV_TI_K3=m
CONFIG_DMADEVICES=y
CONFIG_DMA_BCM2835=y
CONFIG_DMA_SUN6I=m
Enable drivers used on BeaglePlay[1]: * MDIO_GPIO driver to workaround erratum i2329, DP83TD510 SPE phy (enabled in-kernel to ease usage) * TPS65219 PMIC, regulator and power button as modules * BQ32K battery backedup RTC and the K3 RTC drivers as modules bloat-o-meter reports after this change: add/remove: 19/2 grow/shrink: 2/0 up/down: 3036/-16 (3020) [...] Total: Before=18094456, After=18097476, chg +0.02% [1] https://beagleplay.org Signed-off-by: Nishanth Menon <nm@ti.com> --- arch/arm64/configs/defconfig | 7 +++++++ 1 file changed, 7 insertions(+)