| Message ID | 20230313224237.28757-6-Sergey.Semin@baikalelectronics.ru (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | net: stmmac: Fixes bundle #1 | expand |
On Tue, Mar 14, 2023 at 01:42:29AM +0300, Serge Semin wrote: > It wasn't stated why the Alternate Descriptor Size shouldn't have been > changed for the chained DMA descriptors, while the original commit did > introduce some chain_mode.c modifications. So the ATDS-related change in > commit c24602ef8664 ("stmmac: support extend descriptors") seems > contradicting. Anyway from the DW MAC/GMAC hardware point of view there is > no such limitation - whether the chained descriptors can't be used > together with the extended alternate descriptors. Moreover not setting the > BUS_MODE.ATDS flag will cause the driver malfunction in the framework of > the IPC Full Checksum and Advanced Timestamp feature, since the later > features require the additional 4-7 dwords of the DMA descriptor to set > some flags and a timestamp. So to speak in order to have all these > features working correctly in the chained mode too let's make sure the > ATDS flag is set irrespectively from the DMA descriptors mode. > > Fixes: c24602ef8664 ("stmmac: support extend descriptors") > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> > --- > drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 7 ++----- > 1 file changed, 2 insertions(+), 5 deletions(-) > > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c > index 2ed63acaee5b..ee4297a25521 100644 > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c > @@ -2907,7 +2907,6 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv) > struct stmmac_rx_queue *rx_q; > struct stmmac_tx_queue *tx_q; > u32 chan = 0; > - int atds = 0; > int ret = 0; > > if (!priv->plat->dma_cfg || !priv->plat->dma_cfg->pbl) { > @@ -2915,9 +2914,6 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv) > return -EINVAL; > } > > - if (priv->extend_desc && (priv->mode == STMMAC_RING_MODE)) > - atds = 1; > - > ret = stmmac_reset(priv, priv->ioaddr); > if (ret) { > dev_err(priv->device, "Failed to reset the dma\n"); > @@ -2925,7 +2921,8 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv) > } > > /* DMA Configuration */ > - stmmac_dma_init(priv, priv->ioaddr, priv->plat->dma_cfg, atds); > + stmmac_dma_init(priv, priv->ioaddr, priv->plat->dma_cfg, > + priv->extend_desc); > > if (priv->plat->axi) > stmmac_axi(priv, priv->ioaddr, priv->plat->axi); > -- > 2.39.2 > > Looks fine, thanks. Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 2ed63acaee5b..ee4297a25521 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -2907,7 +2907,6 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv) struct stmmac_rx_queue *rx_q; struct stmmac_tx_queue *tx_q; u32 chan = 0; - int atds = 0; int ret = 0; if (!priv->plat->dma_cfg || !priv->plat->dma_cfg->pbl) { @@ -2915,9 +2914,6 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv) return -EINVAL; } - if (priv->extend_desc && (priv->mode == STMMAC_RING_MODE)) - atds = 1; - ret = stmmac_reset(priv, priv->ioaddr); if (ret) { dev_err(priv->device, "Failed to reset the dma\n"); @@ -2925,7 +2921,8 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv) } /* DMA Configuration */ - stmmac_dma_init(priv, priv->ioaddr, priv->plat->dma_cfg, atds); + stmmac_dma_init(priv, priv->ioaddr, priv->plat->dma_cfg, + priv->extend_desc); if (priv->plat->axi) stmmac_axi(priv, priv->ioaddr, priv->plat->axi);
It wasn't stated why the Alternate Descriptor Size shouldn't have been changed for the chained DMA descriptors, while the original commit did introduce some chain_mode.c modifications. So the ATDS-related change in commit c24602ef8664 ("stmmac: support extend descriptors") seems contradicting. Anyway from the DW MAC/GMAC hardware point of view there is no such limitation - whether the chained descriptors can't be used together with the extended alternate descriptors. Moreover not setting the BUS_MODE.ATDS flag will cause the driver malfunction in the framework of the IPC Full Checksum and Advanced Timestamp feature, since the later features require the additional 4-7 dwords of the DMA descriptor to set some flags and a timestamp. So to speak in order to have all these features working correctly in the chained mode too let's make sure the ATDS flag is set irrespectively from the DMA descriptors mode. Fixes: c24602ef8664 ("stmmac: support extend descriptors") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)