@@ -65,26 +65,86 @@ fixed-link {
port@1 {
reg = <1>;
label = "sw1";
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <1>;
+ };
+ };
};
port@2 {
reg = <2>;
label = "sw2";
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <2>;
+ };
+ };
};
port@3 {
reg = <3>;
label = "sw3";
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <3>;
+ };
+ };
};
port@4 {
reg = <4>;
label = "sw4";
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <4>;
+ };
+ };
};
port@5 {
reg = <5>;
label = "sw5";
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <5>;
+ };
+ };
};
};
};
@@ -130,26 +190,86 @@ fixed-link {
port@1 {
reg = <1>;
label = "sw6";
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <6>;
+ };
+ };
};
port@2 {
reg = <2>;
label = "sw7";
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <7>;
+ };
+ };
};
port@3 {
reg = <3>;
label = "sw8";
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <8>;
+ };
+ };
};
port@4 {
reg = <4>;
label = "sw9";
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <9>;
+ };
+ };
};
port@5 {
reg = <5>;
label = "sw10";
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <10>;
+ };
+ };
};
};
};
Add Switch LED for each port for MikroTik RB3011UiAS-RM. MikroTik RB3011UiAS-RM is a 10 port device with 2 qca8337 switch chips connected. It was discovered that in the hardware design all 3 Switch LED trace of the related port is connected to the same LED. This was discovered by setting to 'always on' the related led in the switch regs and noticing that all 3 LED for the specific port (for example for port 1) cause the connected LED for port 1 to turn on. As an extra test we tried enabling 2 different LED for the port resulting in the LED turned off only if every led in the reg was off. Aside from this funny and strange hardware implementation, the device itself have one green LED for each port, resulting in 10 green LED one for each of the 10 supported port. Cc: Jonathan McDowell <noodles@earth.li> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> --- arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 120 ++++++++++++++++++++++ 1 file changed, 120 insertions(+)