Message ID | 20230323144833.28562-4-clin@suse.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | pinctrl: s32: driver improvements and generic struct use | expand |
On Thu, Mar 23, 2023 at 4:49 PM Chester Lin <clin@suse.com> wrote: > > Move common codes into smaller inline functions and remove argument checks > that are not actually used by pull up/down bits in S32 MSCR register. in the S32 Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> > Signed-off-by: Chester Lin <clin@suse.com> > --- > Changes v3: > - Move the PIN_CONFIG_BIAS_DISABLE case to be with PU and PD cases since > they have the same function call. > - Roll back the argument checks of OUTPUT_ENABLE and INPUT_ENABLE cases > since they were wrongly removed with the PU & PD parts in v2. > > drivers/pinctrl/nxp/pinctrl-s32cc.c | 52 ++++++++++++++++++----------- > 1 file changed, 33 insertions(+), 19 deletions(-) > > diff --git a/drivers/pinctrl/nxp/pinctrl-s32cc.c b/drivers/pinctrl/nxp/pinctrl-s32cc.c > index f698e1a240ef..36f323f87785 100644 > --- a/drivers/pinctrl/nxp/pinctrl-s32cc.c > +++ b/drivers/pinctrl/nxp/pinctrl-s32cc.c > @@ -474,11 +474,38 @@ static int s32_get_slew_regval(int arg) > return -EINVAL; > } > > -static int s32_get_pin_conf(enum pin_config_param param, u32 arg, > - unsigned int *mask, unsigned int *config) > +static inline void s32_pin_set_pull(enum pin_config_param param, > + unsigned int *mask, unsigned int *config) > { > + switch (param) { > + case PIN_CONFIG_BIAS_DISABLE: > + case PIN_CONFIG_BIAS_HIGH_IMPEDANCE: > + *config &= ~(S32_MSCR_PUS | S32_MSCR_PUE); > + break; > + case PIN_CONFIG_BIAS_PULL_UP: > + *config |= S32_MSCR_PUS | S32_MSCR_PUE; > + break; > + case PIN_CONFIG_BIAS_PULL_DOWN: > + *config &= ~S32_MSCR_PUS; > + *config |= S32_MSCR_PUE; > + break; > + default: > + return; > + } > + > + *mask |= S32_MSCR_PUS | S32_MSCR_PUE; > +} > + > +static int s32_parse_pincfg(unsigned long pincfg, unsigned int *mask, > + unsigned int *config) > +{ > + enum pin_config_param param; > + u32 arg; > int ret; > > + param = pinconf_to_config_param(pincfg); > + arg = pinconf_to_config_argument(pincfg); > + > switch (param) { > /* All pins are persistent over suspend */ > case PIN_CONFIG_PERSIST_STATE: > @@ -508,26 +535,15 @@ static int s32_get_pin_conf(enum pin_config_param param, u32 arg, > *config |= S32_MSCR_SRE((u32)ret); > *mask |= S32_MSCR_SRE(~0); > break; > + case PIN_CONFIG_BIAS_DISABLE: > case PIN_CONFIG_BIAS_PULL_UP: > - if (arg) > - *config |= S32_MSCR_PUS; > - else > - *config &= ~S32_MSCR_PUS; > - fallthrough; > case PIN_CONFIG_BIAS_PULL_DOWN: > - if (arg) > - *config |= S32_MSCR_PUE; > - else > - *config &= ~S32_MSCR_PUE; > - *mask |= S32_MSCR_PUE | S32_MSCR_PUS; > + s32_pin_set_pull(param, mask, config); > break; > case PIN_CONFIG_BIAS_HIGH_IMPEDANCE: > *config &= ~(S32_MSCR_ODE | S32_MSCR_OBE | S32_MSCR_IBE); > *mask |= S32_MSCR_ODE | S32_MSCR_OBE | S32_MSCR_IBE; > - fallthrough; > - case PIN_CONFIG_BIAS_DISABLE: > - *config &= ~(S32_MSCR_PUS | S32_MSCR_PUE); > - *mask |= S32_MSCR_PUS | S32_MSCR_PUE; > + s32_pin_set_pull(param, mask, config); > break; > default: > return -EOPNOTSUPP; > @@ -553,9 +569,7 @@ static int s32_pinconf_mscr_update(struct pinctrl_dev *pctldev, > pin_get_name(pctldev, pin_id), num_configs); > > for (i = 0; i < num_configs; i++) { > - ret = s32_get_pin_conf(pinconf_to_config_param(configs[i]), > - pinconf_to_config_argument(configs[i]), > - &mask, &config); > + ret = s32_parse_pincfg(configs[i], &mask, &config); > if (ret) > return ret; > } > -- > 2.37.3 >
diff --git a/drivers/pinctrl/nxp/pinctrl-s32cc.c b/drivers/pinctrl/nxp/pinctrl-s32cc.c index f698e1a240ef..36f323f87785 100644 --- a/drivers/pinctrl/nxp/pinctrl-s32cc.c +++ b/drivers/pinctrl/nxp/pinctrl-s32cc.c @@ -474,11 +474,38 @@ static int s32_get_slew_regval(int arg) return -EINVAL; } -static int s32_get_pin_conf(enum pin_config_param param, u32 arg, - unsigned int *mask, unsigned int *config) +static inline void s32_pin_set_pull(enum pin_config_param param, + unsigned int *mask, unsigned int *config) { + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + case PIN_CONFIG_BIAS_HIGH_IMPEDANCE: + *config &= ~(S32_MSCR_PUS | S32_MSCR_PUE); + break; + case PIN_CONFIG_BIAS_PULL_UP: + *config |= S32_MSCR_PUS | S32_MSCR_PUE; + break; + case PIN_CONFIG_BIAS_PULL_DOWN: + *config &= ~S32_MSCR_PUS; + *config |= S32_MSCR_PUE; + break; + default: + return; + } + + *mask |= S32_MSCR_PUS | S32_MSCR_PUE; +} + +static int s32_parse_pincfg(unsigned long pincfg, unsigned int *mask, + unsigned int *config) +{ + enum pin_config_param param; + u32 arg; int ret; + param = pinconf_to_config_param(pincfg); + arg = pinconf_to_config_argument(pincfg); + switch (param) { /* All pins are persistent over suspend */ case PIN_CONFIG_PERSIST_STATE: @@ -508,26 +535,15 @@ static int s32_get_pin_conf(enum pin_config_param param, u32 arg, *config |= S32_MSCR_SRE((u32)ret); *mask |= S32_MSCR_SRE(~0); break; + case PIN_CONFIG_BIAS_DISABLE: case PIN_CONFIG_BIAS_PULL_UP: - if (arg) - *config |= S32_MSCR_PUS; - else - *config &= ~S32_MSCR_PUS; - fallthrough; case PIN_CONFIG_BIAS_PULL_DOWN: - if (arg) - *config |= S32_MSCR_PUE; - else - *config &= ~S32_MSCR_PUE; - *mask |= S32_MSCR_PUE | S32_MSCR_PUS; + s32_pin_set_pull(param, mask, config); break; case PIN_CONFIG_BIAS_HIGH_IMPEDANCE: *config &= ~(S32_MSCR_ODE | S32_MSCR_OBE | S32_MSCR_IBE); *mask |= S32_MSCR_ODE | S32_MSCR_OBE | S32_MSCR_IBE; - fallthrough; - case PIN_CONFIG_BIAS_DISABLE: - *config &= ~(S32_MSCR_PUS | S32_MSCR_PUE); - *mask |= S32_MSCR_PUS | S32_MSCR_PUE; + s32_pin_set_pull(param, mask, config); break; default: return -EOPNOTSUPP; @@ -553,9 +569,7 @@ static int s32_pinconf_mscr_update(struct pinctrl_dev *pctldev, pin_get_name(pctldev, pin_id), num_configs); for (i = 0; i < num_configs; i++) { - ret = s32_get_pin_conf(pinconf_to_config_param(configs[i]), - pinconf_to_config_argument(configs[i]), - &mask, &config); + ret = s32_parse_pincfg(configs[i], &mask, &config); if (ret) return ret; }
Move common codes into smaller inline functions and remove argument checks that are not actually used by pull up/down bits in S32 MSCR register. Signed-off-by: Chester Lin <clin@suse.com> --- Changes v3: - Move the PIN_CONFIG_BIAS_DISABLE case to be with PU and PD cases since they have the same function call. - Roll back the argument checks of OUTPUT_ENABLE and INPUT_ENABLE cases since they were wrongly removed with the PU & PD parts in v2. drivers/pinctrl/nxp/pinctrl-s32cc.c | 52 ++++++++++++++++++----------- 1 file changed, 33 insertions(+), 19 deletions(-)