diff mbox series

[v6,05/14] iommu/mediatek: mt8192: Add iova_region_larb_msk

Message ID 20230403091337.26745-6-yong.wu@mediatek.com (mailing list archive)
State New, archived
Headers show
Series Adjust the dma-ranges for MTK IOMMU | expand

Commit Message

Yong Wu (吴勇) April 3, 2023, 9:13 a.m. UTC 
Add iova_region_larb_msk for mt8192. We separate the 16GB iova regions
by each device's larbid/portid.
Note: larb3/6/8/10/12/15 connect nothing in this SoC.
Refer to the comment in include/dt-bindings/memory/mt8192-larb-port.h

Define a new macro MT8192_MULTI_REGION_NR_MAX to indicate
the index of mt8xxx_larb_region_msk and
"struct mtk_iommu_iova_region mt8192_multi_dom"
are the same.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/iommu/mtk_iommu.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index bc936709fbe6..672059f9e0b7 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -336,7 +336,12 @@  static const struct mtk_iommu_iova_region single_domain[] = {
 	{.iova_base = 0,		.size = SZ_4G},
 };
 
-static const struct mtk_iommu_iova_region mt8192_multi_dom[] = {
+#define MT8192_MULTI_REGION_NR_MAX	6
+
+#define MT8192_MULTI_REGION_NR	(IS_ENABLED(CONFIG_ARCH_DMA_ADDR_T_64BIT) ? \
+				 MT8192_MULTI_REGION_NR_MAX : 1)
+
+static const struct mtk_iommu_iova_region mt8192_multi_dom[MT8192_MULTI_REGION_NR] = {
 	{ .iova_base = 0x0,		.size = SZ_4G},		/* 0 ~ 4G */
 	#if IS_ENABLED(CONFIG_ARCH_DMA_ADDR_T_64BIT)
 	{ .iova_base = SZ_4G,		.size = SZ_4G},		/* 4G ~ 8G */
@@ -1534,6 +1539,17 @@  static const struct mtk_iommu_plat_data mt8186_data_mm = {
 	.iova_region_nr = ARRAY_SIZE(mt8192_multi_dom),
 };
 
+static const unsigned int mt8192_larb_region_msk[MT8192_MULTI_REGION_NR_MAX][MTK_LARB_NR_MAX] = {
+	[0] = {~0, ~0},				/* Region0: larb0/1 */
+	[1] = {0, 0, 0, 0, ~0, ~0, 0, ~0},	/* Region1: larb4/5/7 */
+	[2] = {0, 0, ~0, 0, 0, 0, 0, 0,		/* Region2: larb2/9/11/13/14/16/17/18/19/20 */
+	       0, ~0, 0, ~0, 0, ~(u32)(BIT(9) | BIT(10)), ~(u32)(BIT(4) | BIT(5)), 0,
+	       ~0, ~0, ~0, ~0, ~0},
+	[3] = {0},
+	[4] = {[13] = BIT(9) | BIT(10)},	/* larb13 port9/10 */
+	[5] = {[14] = BIT(4) | BIT(5)},		/* larb14 port4/5 */
+};
+
 static const struct mtk_iommu_plat_data mt8192_data = {
 	.m4u_plat       = M4U_MT8192,
 	.flags          = HAS_BCLK | HAS_SUB_COMM_2BITS | OUT_ORDER_WR_EN |
@@ -1543,6 +1559,7 @@  static const struct mtk_iommu_plat_data mt8192_data = {
 	.banks_enable   = {true},
 	.iova_region    = mt8192_multi_dom,
 	.iova_region_nr = ARRAY_SIZE(mt8192_multi_dom),
+	.iova_region_larb_msk = mt8192_larb_region_msk,
 	.larbid_remap   = {{0}, {1}, {4, 5}, {7}, {2}, {9, 11, 19, 20},
 			   {0, 14, 16}, {0, 13, 18, 17}},
 };