From patchwork Wed Apr 5 16:02:58 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Christoph Niedermaier X-Patchwork-Id: 13202202 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 49F1DC76188 for ; Wed, 5 Apr 2023 16:20:49 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=30uQ/v/MLtIkv6EglSa+CEyHmuH5VdmTXcscYMin/xw=; b=Dz3+s/csZTV80Q a4zGztaU7lw5cdebmA704k7m6wKducjh3TrVz93Zi4r0yLdzP4b7rTgHaZrCO2tHyqucq1a7O04gJ Xmp+PVMw5nwC8DR2rr0Ena9U1GwiLploTEJYLgaHsYz1uNgIYKXleuYMHKzA1brDnCW6Ki1wfUfXD 3a81Wmj+FQf+wbyc3qur6is9u2YYzph4v74vEnZ1jeCshtFD4yHfKgJ4zFoxT4OiDIEB+Zm0VOvGF oycoG5NWX+9RLfLTJM7zccMw2AQMcSETH/dsDNGHfN7k+kS+oNSg98CZ6kndJqWGWAFh6Ujpa5udg YV9n8DS7+/d+3cVuFnWw==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.96 #2 (Red Hat Linux)) id 1pk5rb-0055zx-1V; Wed, 05 Apr 2023 16:19:59 +0000 Received: from mx4.securetransport.de ([178.254.6.145]) by bombadil.infradead.org with esmtp (Exim 4.96 #2 (Red Hat Linux)) id 1pk5rX-0055yw-17 for linux-arm-kernel@lists.infradead.org; Wed, 05 Apr 2023 16:19:57 +0000 Received: from mail.dh-electronics.com (unknown [77.24.89.57]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mx4.securetransport.de (Postfix) with ESMTPSA id 06CBC7204BD; Wed, 5 Apr 2023 18:19:31 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=dh-electronics.com; s=dhelectronicscom; t=1680711572; bh=p+Zoaip7N4gXIR+14XON6bzOV+N2ARpmqXvviCVPQD0=; h=From:To:CC:Subject:Date:In-Reply-To:References:From; b=ovq7V34seMaFMS5AIFfnxQc29eHJTyu9ahVc/1/ffPu/Bve8FGJZoDAEurKWDyHKu S2apLswP596ooXzEFjCFmgaumqXcUrfxQ4b4RZSmUyX6FOCP+J5x7MhbH2OhwQE8ps uZlos7LoKcU/7mNSOPsU+Z9cIpLPm7TgQ/XYtsW5tzKpyh2cdYkgTqDUp3NOquX4wi KnXinKjZ7Q61PoLKwfD+D2UVp4sSoUJpflrDSh6xKUbfN2R9TxJBCuATERxZyaIo2P WHLYcomuBcf68emGJgo4EQlazqvdihoNwpSPJEXAstROC5zkf3TSAZLTQc708cM2br bqdsVPAsL4qjg== Received: from DHPWEX01.DH-ELECTRONICS.ORG (10.64.2.30) by DHPWEX01.DH-ELECTRONICS.ORG (10.64.2.30) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1118.26; Wed, 5 Apr 2023 18:04:22 +0200 Received: from localhost.localdomain (172.16.51.16) by DHPWEX01.DH-ELECTRONICS.ORG (10.64.2.30) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1118.26 via Frontend Transport; Wed, 5 Apr 2023 18:04:21 +0200 From: Christoph Niedermaier To: CC: Christoph Niedermaier , Rob Herring , Krzysztof Kozlowski , Shawn Guo , Li Yang , Marek Vasut , Fabio Estevam , NXP Linux Team , , , Subject: [PATCH 2/2] ARM: dts: imx6ull-dhcor: Add Marantec maveo box Date: Wed, 5 Apr 2023 18:02:58 +0200 Message-ID: <20230405160258.46998-2-cniedermaier@dh-electronics.com> X-Mailer: git-send-email 2.11.0 X-klartext: yes In-Reply-To: <20230405160258.46998-1-cniedermaier@dh-electronics.com> References: <20230405160258.46998-1-cniedermaier@dh-electronics.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20230405_091955_617479_1585B513 X-CRM114-Status: GOOD ( 18.45 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Add support for Marantec maveo box. The system is used to get a smart conntection to a door drive. It has USB, WiFi, Bluetooth, Zigbee and NFC interfaces. The core of this system is a soldered i.MX6ULL DHCOR SoM from DH electronics. Signed-off-by: Christoph Niedermaier --- Cc: Rob Herring Cc: Krzysztof Kozlowski Cc: Shawn Guo Cc: Li Yang Cc: Marek Vasut Cc: Fabio Estevam Cc: NXP Linux Team Cc: kernel@dh-electronics.com Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org To: linux-arm-kernel@lists.infradead.org --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6ull-dhcor-maveo-box.dts | 361 ++++++++++++++++++++++++++ 2 files changed, 362 insertions(+) create mode 100644 arch/arm/boot/dts/imx6ull-dhcor-maveo-box.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index aa8fb4b7cdcc..58d3334164e2 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -751,6 +751,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ull-dhcom-drc02.dtb \ imx6ull-dhcom-pdk2.dtb \ imx6ull-dhcom-picoitx.dtb \ + imx6ull-dhcor-maveo-box.dtb \ imx6ull-jozacp.dtb \ imx6ull-kontron-bl.dtb \ imx6ull-myir-mys-6ulx-eval.dtb \ diff --git a/arch/arm/boot/dts/imx6ull-dhcor-maveo-box.dts b/arch/arm/boot/dts/imx6ull-dhcor-maveo-box.dts new file mode 100644 index 000000000000..04c0eacb05f2 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-dhcor-maveo-box.dts @@ -0,0 +1,361 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2023 DH electronics GmbH + * Copyright (C) 2023 Marantec electronics GmbH + * + * DHCOM iMX6ULL variant: + * DHCR-iMX6ULL-C080-R051-SPI-WBT-I-01LG + * DHCOR PCB number: 578-200 or newer + * maveo box PCB number: 525-200 or newer + */ + +/dts-v1/; + +#include "imx6ull-dhcor-som.dtsi" + +/ { + model = "DH electronics i.MX6ULL DHCOR on maveo box"; + compatible = "dh,imx6ull-dhcor-maveo-box", "dh,imx6ull-dhcor-som", + "fsl,imx6ull"; + + aliases { + /delete-property/ mmc0; /* Avoid double definitions */ + /delete-property/ mmc1; + mmc2 = &usdhc2; /* eMMC should be mmc2 */ + spi0 = &ecspi4; + spi3 = &ecspi1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "usb-otg1-vbus"; + }; + + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + compatible = "regulator-fixed"; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "usb-otg2-vbus"; + }; + + /* WiFi pin WL_REG_ON is connected to GPIO 5.9 */ + usdhc1_pwrseq: usdhc1-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + }; +}; + +/* BT pin BT_REG_ON is connected to GPIO 1.18 */ +&bluetooth { + shutdown-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; +}; + +/* X10 connector */ +&ecspi4 { + cs-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pinctrl_ecspi4>; + pinctrl-names = "default"; + status = "okay"; + + spidev@0 { + compatible = "dh,dhcom-board"; + reg = <0>; + spi-cpha; + spi-cpol; + spi-max-frequency = <54000000>; + }; +}; + +&gpio1 { + gpio-line-names = + "", "", "", "", + "", "BUTTON-USER", "", "", + "BUTTON-RESET", "", "", "", + "", "", "", "", + "", "", "BT-REG-ON", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + "PSOC-GPIO-1", "", "", "X10-12", + "X10-10", "PSOC-GPIO-2", "PSOC-GPIO-3", "", + "X10-11", "X10-9", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + "DHCOR-HW0", "DHCOR-HW1", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "MAVEO-BOX-HW0", "LED-G", "MAVEO-BOX-VAR1", + "MAVEO-BOX-VAR0", "MAVEO-BOX-HW1", "MAVEO-BOX-HW2", "LED-B", + "LED-R", "", "", "", + "", "", "", ""; +}; + +&gpio5 { + gpio-line-names = + "PSOC-SWD-IO", "PSOC-SWD-CLK", "PSOC-RESET", "ZIGBEE-PROG", + "ZIGBEE-RESET", "", "PSOC-PWR-FAIL-OUT", "NFC-ENABLE", + "NFC-IRQ", "WL-REG-ON", "DHCOR-BOOT-M0", "DHCOR-BOOT-M1", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + pinctrl-names = "default", "gpio"; + scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +/* Console UART */ +&uart1 { + pinctrl-0 = <&pinctrl_uart1>; + pinctrl-names = "default"; + status = "okay"; +}; + +/* BT on LGA */ +&uart2 { + pinctrl-0 = <&pinctrl_uart2 &pinctrl_bt_gpio>; +}; + +/* Zigbee UART */ +&uart3 { + pinctrl-0 = <&pinctrl_uart3 &pinctrl_snvs_zigbee_gpio>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usbotg1 { + adp-disable; + disable-over-current; /* Overcurrent pin isn't connected */ + dr_mode = "otg"; + hnp-disable; + pinctrl-0 = <&pinctrl_usbotg1>; + pinctrl-names = "default"; + srp-disable; + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + disable-over-current; /* Overcurrent pin isn't connected */ + dr_mode = "host"; + pinctrl-0 = <&pinctrl_usbotg2>; + pinctrl-names = "default"; + tpl-support; + vbus-supply = <®_usb_otg2_vbus>; + status = "okay"; +}; + +&usbphy1 { + fsl,tx-d-cal = <106>; +}; + +&usbphy2 { + fsl,tx-d-cal = <106>; +}; + +/* WiFi on LGA */ +&usdhc1 { + mmc-pwrseq = <&usdhc1_pwrseq>; + pinctrl-0 = <&pinctrl_usdhc1_wifi &pinctrl_snvs_wifi_gpio>; +}; + +/* eMMC */ +&usdhc2 { + bus-width = <8>; + no-1-8-v; + non-removable; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-names = "default"; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_3v3>; + status = "okay"; +}; + +&iomuxc { + pinctrl-0 = <&pinctrl_hog_maveo_box>; + pinctrl-names = "default"; + + pinctrl_hog_maveo_box: hog-maveo-box-grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x400120b0 /* BUTTON_USER */ + MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x400120b0 /* BUTTON_RESET */ + MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18 0x400120b0 /* LED_G */ + MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x400120b0 /* LED_B */ + MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x400120b0 /* LED_R */ + MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x400120b0 /* X10_9 */ + MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04 0x400120b0 /* X10_10 */ + MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x400120b0 /* X10_11 */ + MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03 0x400120b0 /* X10_12 */ + MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00 0x400120b0 /* PSOC_GPIO_1 */ + MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05 0x400120b0 /* PSOC_GPIO_2 */ + MX6UL_PAD_ENET1_TX_CLK__GPIO2_IO06 0x400120b0 /* PSOC_GPIO_3 */ + MX6UL_PAD_CSI_MCLK__GPIO4_IO17 0x120b0 /* MAVEO_BOX_HW0 */ + MX6UL_PAD_CSI_DATA00__GPIO4_IO21 0x120b0 /* MAVEO_BOX_HW1 */ + MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x120b0 /* MAVEO_BOX_HW2 */ + MX6UL_PAD_CSI_HSYNC__GPIO4_IO20 0x120b0 /* MAVEO_BOX_VAR0 */ + MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0x120b0 /* MAVEO_BOX_VAR1 */ + MX6UL_PAD_LCD_CLK__GPIO3_IO00 0x120b0 /* DHCOR_HW0 */ + MX6UL_PAD_LCD_ENABLE__GPIO3_IO01 0x120b0 /* DHCOR_HW1 */ + MX6UL_PAD_LCD_DATA00__GPIO3_IO05 0x120b0 + MX6UL_PAD_LCD_DATA01__GPIO3_IO06 0x120b0 + MX6UL_PAD_LCD_DATA02__GPIO3_IO07 0x120b0 + MX6UL_PAD_LCD_DATA03__GPIO3_IO08 0x120b0 + MX6UL_PAD_LCD_DATA04__GPIO3_IO09 0x120b0 + MX6UL_PAD_LCD_DATA05__GPIO3_IO10 0x120b0 + MX6UL_PAD_LCD_DATA06__GPIO3_IO11 0x120b0 + MX6UL_PAD_LCD_DATA07__GPIO3_IO12 0x120b0 + MX6UL_PAD_LCD_DATA08__GPIO3_IO13 0x120b0 + MX6UL_PAD_LCD_DATA09__GPIO3_IO14 0x120b0 + MX6UL_PAD_LCD_DATA10__GPIO3_IO15 0x120b0 + MX6UL_PAD_LCD_DATA11__GPIO3_IO16 0x120b0 + MX6UL_PAD_LCD_DATA12__GPIO3_IO17 0x120b0 + MX6UL_PAD_LCD_DATA13__GPIO3_IO18 0x120b0 + MX6UL_PAD_LCD_DATA14__GPIO3_IO19 0x120b0 + MX6UL_PAD_LCD_DATA15__GPIO3_IO20 0x120b0 + MX6UL_PAD_LCD_DATA16__GPIO3_IO21 0x120b0 + MX6UL_PAD_LCD_DATA17__GPIO3_IO22 0x120b0 + MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x120b0 + >; + }; + + pinctrl_bt_gpio: bt-gpio-grp { + fsl,pins = < + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x400120b0 /* BT_REG_ON */ + >; + }; + + pinctrl_ecspi4: ecspi4-grp { + fsl,pins = < + MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO 0x100b1 + MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI 0x100b1 + MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK 0x100b1 + MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x1b0b0 /* SS0 */ + >; + }; + + pinctrl_i2c2: i2c2-grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c2_gpio: i2c2-gpio-grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x4001b8b0 + MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x4001b8b0 + >; + }; + + pinctrl_uart1: uart1-grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3-grp { + fsl,pins = < + MX6UL_PAD_NAND_READY_B__UART3_DCE_TX 0x1b0b1 + MX6UL_PAD_NAND_CE0_B__UART3_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usbotg1: usbotg1-grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059 + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x120b0 /* USB_OTG1_PWR */ + >; + }; + + pinctrl_usbotg2: usbotg2-grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x120b0 /* USB_OTG2_PWR */ + >; + }; + + pinctrl_usdhc2: usdhc2-grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10069 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059 + MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x17059 /* SD2 Reset */ + >; + }; +}; + +&iomuxc_snvs { + pinctrl-0 = <&pinctrl_snvs_hog_maveo_box>; + pinctrl-names = "default"; + + pinctrl_snvs_hog_maveo_box: snvs-hog-maveo-box-grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x400120b0 /* PSOC_SWD_IO */ + MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x400120b0 /* PSOC_SWD_CLK */ + MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x400120b0 /* PSOC_RESET */ + MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x400120b0 /* PSOC_PWR_FAIL_OUT */ + MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x400120b0 /* NFC_ENABLE */ + MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x400120b0 /* NFC_IRQ */ + MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10 0x120b0 /* DHCOR_BOOT_M0 */ + MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x120b0 /* DHCOR_BOOT_M1 */ + >; + }; + + pinctrl_snvs_wifi_gpio: snvs-wifi-gpio-grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x400120b0 /* WL_REG_ON */ + >; + }; + + pinctrl_snvs_zigbee_gpio: snvs-zigbee-gpio-grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x400120b0 /* ZIGBEE_PROG */ + MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x400120b0 /* ZIGBEE_RESET */ + >; + }; +};