diff mbox series

[3/4] dt-bindings: power: reset: convert nvmem-reboot-mode bindings to YAML

Message ID 20230413131705.3073911-4-brgl@bgdev.pl (mailing list archive)
State New, archived
Headers show
Series arm64: qcom: fix the reboot reason handling on sa8775p | expand

Commit Message

Bartosz Golaszewski April 13, 2023, 1:17 p.m. UTC 
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Convert the DT binding document for nvmem-reboot-mode from .txt to YAML.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 .../power/reset/nvmem-reboot-mode.txt         | 26 ----------
 .../power/reset/nvmem-reboot-mode.yaml        | 52 +++++++++++++++++++
 2 files changed, 52 insertions(+), 26 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt
 create mode 100644 Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml

Comments

Krzysztof Kozlowski April 16, 2023, 3:20 p.m. UTC | #1 
On 13/04/2023 15:17, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> 
> Convert the DT binding document for nvmem-reboot-mode from .txt to YAML.

Thank you for your patch. There is something to discuss/improve.

> diff --git a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml
> new file mode 100644
> index 000000000000..64a7d224c7dd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml
> @@ -0,0 +1,52 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/power/reset/nvmem-reboot-mode.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Generic NVMEM reboot mode driver

Drop "driver".
> +
> +maintainers:
> +  - Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> +
> +description: |

Do not need '|' unless you need to preserve formatting.

> +  This driver gets the reboot mode magic value from the reboot-mode driver
> +  and stores it in the NVMEM cell named "reboot-mode". The bootloader can
> +  then read it and take different action according to the value.
> +
> +properties:
> +  compatible:
> +    const: nvmem-reboot-mode
> +
> +  nvmem-cells:
> +    description: |

Do not need '|' unless you need to preserve formatting.

> +      A phandle pointing to the nvmem-cells node where the vendor-specific
> +      magic value representing the reboot mode is stored.
> +    maxItems: 1
> +
> +  nvmem-cell-names:
> +    items:
> +      - const: reboot-mode
> +
> +patternProperties:
> +  "^mode-.+":
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: Vendor-specific mode value written to the mode register
> +
> +additionalProperties: false
> +
> +required:
> +  - compatible
> +  - nvmem-cells
> +  - nvmem-cell-names

put required: before additionalProperties

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt
deleted file mode 100644
index 752d6126d5da..000000000000
--- a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt
+++ /dev/null
@@ -1,26 +0,0 @@ 
-NVMEM reboot mode driver
-
-This driver gets reboot mode magic value from reboot-mode driver
-and stores it in a NVMEM cell named "reboot-mode". Then the bootloader
-can read it and take different action according to the magic
-value stored.
-
-Required properties:
-- compatible: should be "nvmem-reboot-mode".
-- nvmem-cells: A phandle to the reboot mode provided by a nvmem device.
-- nvmem-cell-names: Should be "reboot-mode".
-
-The rest of the properties should follow the generic reboot-mode description
-found in reboot-mode.txt
-
-Example:
-	reboot-mode {
-		compatible = "nvmem-reboot-mode";
-		nvmem-cells = <&reboot_mode>;
-		nvmem-cell-names = "reboot-mode";
-
-		mode-normal     = <0xAAAA5501>;
-		mode-bootloader = <0xBBBB5500>;
-		mode-recovery   = <0xCCCC5502>;
-		mode-test       = <0xDDDD5503>;
-	};
diff --git a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml
new file mode 100644
index 000000000000..64a7d224c7dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml
@@ -0,0 +1,52 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/nvmem-reboot-mode.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic NVMEM reboot mode driver
+
+maintainers:
+  - Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+description: |
+  This driver gets the reboot mode magic value from the reboot-mode driver
+  and stores it in the NVMEM cell named "reboot-mode". The bootloader can
+  then read it and take different action according to the value.
+
+properties:
+  compatible:
+    const: nvmem-reboot-mode
+
+  nvmem-cells:
+    description: |
+      A phandle pointing to the nvmem-cells node where the vendor-specific
+      magic value representing the reboot mode is stored.
+    maxItems: 1
+
+  nvmem-cell-names:
+    items:
+      - const: reboot-mode
+
+patternProperties:
+  "^mode-.+":
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Vendor-specific mode value written to the mode register
+
+additionalProperties: false
+
+required:
+  - compatible
+  - nvmem-cells
+  - nvmem-cell-names
+
+examples:
+  - |
+    reboot-mode {
+        compatible = "nvmem-reboot-mode";
+        nvmem-cells = <&reboot_reason>;
+        nvmem-cell-names = "reboot-mode";
+        mode-recovery = <0x01>;
+        mode-bootloader = <0x02>;
+    };
+...