diff mbox series

[26/37] riscv: Switch to hotplug core state synchronization

Message ID 20230414232310.817955867@linutronix.de (mailing list archive)
State New, archived
Headers show
Series cpu/hotplug, x86: Reworked parallel CPU bringup | expand

Commit Message

Thomas Gleixner April 14, 2023, 11:44 p.m. UTC
Switch to the CPU hotplug core state tracking and synchronization
mechanim. No functional change intended.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: linux-riscv@lists.infradead.org
---
 arch/riscv/Kconfig              |    1 +
 arch/riscv/include/asm/smp.h    |    2 +-
 arch/riscv/kernel/cpu-hotplug.c |   14 +++++++-------
 3 files changed, 9 insertions(+), 8 deletions(-)

Comments

Palmer Dabbelt May 1, 2023, 11:55 p.m. UTC | #1
On Fri, 14 Apr 2023 16:44:55 PDT (-0700), tglx@linutronix.de wrote:
> Switch to the CPU hotplug core state tracking and synchronization
> mechanim. No functional change intended.
>
> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
> Cc: Paul Walmsley <paul.walmsley@sifive.com>
> Cc: Palmer Dabbelt <palmer@dabbelt.com>
> Cc: linux-riscv@lists.infradead.org
> ---
>  arch/riscv/Kconfig              |    1 +
>  arch/riscv/include/asm/smp.h    |    2 +-
>  arch/riscv/kernel/cpu-hotplug.c |   14 +++++++-------
>  3 files changed, 9 insertions(+), 8 deletions(-)
>
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -116,6 +116,7 @@ config RISCV
>  	select HAVE_RSEQ
>  	select HAVE_STACKPROTECTOR
>  	select HAVE_SYSCALL_TRACEPOINTS
> +	select HOTPLUG_CORE_SYNC_DEAD if HOTPLUG_CPU
>  	select IRQ_DOMAIN
>  	select IRQ_FORCED_THREADING
>  	select MODULES_USE_ELF_RELA if MODULES
> --- a/arch/riscv/include/asm/smp.h
> +++ b/arch/riscv/include/asm/smp.h
> @@ -64,7 +64,7 @@ asmlinkage void smp_callin(void);
>
>  #if defined CONFIG_HOTPLUG_CPU
>  int __cpu_disable(void);
> -void __cpu_die(unsigned int cpu);
> +static inline void __cpu_die(unsigned int cpu) { }
>  #endif /* CONFIG_HOTPLUG_CPU */
>
>  #else
> --- a/arch/riscv/kernel/cpu-hotplug.c
> +++ b/arch/riscv/kernel/cpu-hotplug.c
> @@ -8,6 +8,7 @@
>  #include <linux/sched.h>
>  #include <linux/err.h>
>  #include <linux/irq.h>
> +#include <linux/cpuhotplug.h>
>  #include <linux/cpu.h>
>  #include <linux/sched/hotplug.h>
>  #include <asm/irq.h>
> @@ -48,17 +49,15 @@ int __cpu_disable(void)
>  	return ret;
>  }
>
> +#ifdef CONFIG_HOTPLUG_CPU
>  /*
> - * Called on the thread which is asking for a CPU to be shutdown.
> + * Called on the thread which is asking for a CPU to be shutdown, if the
> + * CPU reported dead to the hotplug core.
>   */
> -void __cpu_die(unsigned int cpu)
> +void arch_cpuhp_cleanup_dead_cpu(unsigned int cpu)
>  {
>  	int ret = 0;
>
> -	if (!cpu_wait_death(cpu, 5)) {
> -		pr_err("CPU %u: didn't die\n", cpu);
> -		return;
> -	}
>  	pr_notice("CPU%u: off\n", cpu);
>
>  	/* Verify from the firmware if the cpu is really stopped*/
> @@ -75,9 +74,10 @@ void arch_cpu_idle_dead(void)
>  {
>  	idle_task_exit();
>
> -	(void)cpu_report_death();
> +	cpuhp_ap_report_dead();
>
>  	cpu_ops[smp_processor_id()]->cpu_stop();
>  	/* It should never reach here */
>  	BUG();
>  }
> +#endif

Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
diff mbox series

Patch

--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -116,6 +116,7 @@  config RISCV
 	select HAVE_RSEQ
 	select HAVE_STACKPROTECTOR
 	select HAVE_SYSCALL_TRACEPOINTS
+	select HOTPLUG_CORE_SYNC_DEAD if HOTPLUG_CPU
 	select IRQ_DOMAIN
 	select IRQ_FORCED_THREADING
 	select MODULES_USE_ELF_RELA if MODULES
--- a/arch/riscv/include/asm/smp.h
+++ b/arch/riscv/include/asm/smp.h
@@ -64,7 +64,7 @@  asmlinkage void smp_callin(void);
 
 #if defined CONFIG_HOTPLUG_CPU
 int __cpu_disable(void);
-void __cpu_die(unsigned int cpu);
+static inline void __cpu_die(unsigned int cpu) { }
 #endif /* CONFIG_HOTPLUG_CPU */
 
 #else
--- a/arch/riscv/kernel/cpu-hotplug.c
+++ b/arch/riscv/kernel/cpu-hotplug.c
@@ -8,6 +8,7 @@ 
 #include <linux/sched.h>
 #include <linux/err.h>
 #include <linux/irq.h>
+#include <linux/cpuhotplug.h>
 #include <linux/cpu.h>
 #include <linux/sched/hotplug.h>
 #include <asm/irq.h>
@@ -48,17 +49,15 @@  int __cpu_disable(void)
 	return ret;
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
 /*
- * Called on the thread which is asking for a CPU to be shutdown.
+ * Called on the thread which is asking for a CPU to be shutdown, if the
+ * CPU reported dead to the hotplug core.
  */
-void __cpu_die(unsigned int cpu)
+void arch_cpuhp_cleanup_dead_cpu(unsigned int cpu)
 {
 	int ret = 0;
 
-	if (!cpu_wait_death(cpu, 5)) {
-		pr_err("CPU %u: didn't die\n", cpu);
-		return;
-	}
 	pr_notice("CPU%u: off\n", cpu);
 
 	/* Verify from the firmware if the cpu is really stopped*/
@@ -75,9 +74,10 @@  void arch_cpu_idle_dead(void)
 {
 	idle_task_exit();
 
-	(void)cpu_report_death();
+	cpuhp_ap_report_dead();
 
 	cpu_ops[smp_processor_id()]->cpu_stop();
 	/* It should never reach here */
 	BUG();
 }
+#endif