diff mbox series

[V2,1/3] dt-bindings: nvmem: brcm,nvram: add #nvmem-cell-cells for MACs

Message ID 20230421084312.27932-1-zajec5@gmail.com (mailing list archive)
State New, archived
Headers show
Series [V2,1/3] dt-bindings: nvmem: brcm,nvram: add #nvmem-cell-cells for MACs | expand

Commit Message

Rafał Miłecki April 21, 2023, 8:43 a.m. UTC 
From: Rafał Miłecki <rafal@milecki.pl>

Broadcom's NVRAM contains MACs for Ethernet interfaces. Those MACs are
usually base addresses that are also used for calculating other MACs.

For example if a router vendor decided to use gmac0 it most likely
programmed NVRAM of each unit with a proper "et0macaddr" value. That is
a base.

Ethernet interface is usually connected to switch port. Switch usually
includes few LAN ports and a WAN port. MAC of WAN port gets calculated
as relative address to the interface one. Offset varies depending on
device model.

Wireless MACs may also need to be calculated using relevant offsets.

To support all those scenarios let MAC NVMEM cells be referenced with an
index specifying MAC offset. Disallow additionalProperties while at it.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
---
V2: Add additionalProperties: false
---
 .../devicetree/bindings/nvmem/brcm,nvram.yaml     | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml b/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml
index 36def7128fca..13412af7f046 100644
--- a/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml
+++ b/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml
@@ -36,14 +36,29 @@  properties:
   et0macaddr:
     type: object
     description: First Ethernet interface's MAC address
+    properties:
+      "#nvmem-cell-cells":
+        description: The first argument is a MAC address offset.
+        const: 1
+    additionalProperties: false
 
   et1macaddr:
     type: object
     description: Second Ethernet interface's MAC address
+    properties:
+      "#nvmem-cell-cells":
+        description: The first argument is a MAC address offset.
+        const: 1
+    additionalProperties: false
 
   et2macaddr:
     type: object
     description: Third Ethernet interface's MAC address
+    properties:
+      "#nvmem-cell-cells":
+        description: The first argument is a MAC address offset.
+        const: 1
+    additionalProperties: false
 
 unevaluatedProperties: false