@@ -14,6 +14,13 @@ maintainers:
allOf:
- $ref: can-controller.yaml#
+oneOf:
+ - required:
+ - interrupts
+ - interrupt-names
+ - required:
+ - poll-interval
+
properties:
compatible:
const: bosch,m_can
@@ -40,6 +47,14 @@ properties:
- const: int1
minItems: 1
+ poll-interval:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: Enable hrtimer polling method for an M_CAN device.
+ If this property is defined in MCAN node, it tells the driver to
+ enable polling method for an MCAN device. If for an MCAN device,
+ hardware interrupt is found and hrtimer polling method is enabled,
+ the driver will use hardware interrupt method.
+
clocks:
items:
- description: peripheral clock
@@ -122,8 +137,6 @@ required:
- compatible
- reg
- reg-names
- - interrupts
- - interrupt-names
- clocks
- clock-names
- bosch,mram-cfg
@@ -132,6 +145,7 @@ additionalProperties: false
examples:
- |
+ // Example with interrupts
#include <dt-bindings/clock/imx6sx-clock.h>
can@20e8000 {
compatible = "bosch,m_can";
@@ -149,4 +163,22 @@ examples:
};
};
+ - |
+ // Example with timer polling
+ #include <dt-bindings/clock/imx6sx-clock.h>
+ can@20e8000 {
+ compatible = "bosch,m_can";
+ reg = <0x020e8000 0x4000>, <0x02298000 0x4000>;
+ reg-names = "m_can", "message_ram";
+ poll-interval;
+ clocks = <&clks IMX6SX_CLK_CANFD>,
+ <&clks IMX6SX_CLK_CANFD>;
+ clock-names = "hclk", "cclk";
+ bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>;
+
+ can-transceiver {
+ max-bitrate = <5000000>;
+ };
+ };
+
...
On AM62x SoC, MCANs on MCU domain do not have hardware interrupt routed to A53 Linux, instead they will use software interrupt by hrtimer. To enable timer method, interrupts should be optional so remove interrupts property from required section and introduce poll-interval property. Signed-off-by: Judith Mendez <jm@ti.com> --- Changelog: v3: 1. Move binding patch to first in series 2. Update description for poll-interval 3. Add oneOf to specify using interrupts/interrupt-names or poll-interval 4. Fix example property: add comment below 'example' v2: 1. Add poll-interval property to enable timer polling method 2. Add example using poll-interval property .../bindings/net/can/bosch,m_can.yaml | 36 +++++++++++++++++-- 1 file changed, 34 insertions(+), 2 deletions(-)