@@ -297,9 +297,9 @@ static int lvts_set_trips(struct thermal_zone_device *tz, int low, int high)
u32 raw_high = lvts_temp_to_raw(high);
/*
- * Hot to normal temperature threshold
+ * Low offset temperature threshold
*
- * LVTS_H2NTHRE
+ * LVTS_OFFSETL
*
* Bits:
*
@@ -308,13 +308,13 @@ static int lvts_set_trips(struct thermal_zone_device *tz, int low, int high)
if (low != -INT_MAX) {
pr_debug("%s: Setting low limit temperature interrupt: %d\n",
thermal_zone_device_type(tz), low);
- writel(raw_low, LVTS_H2NTHRE(base));
+ writel(raw_low, LVTS_OFFSETL(base));
}
/*
- * Hot temperature threshold
+ * High offset temperature threshold
*
- * LVTS_HTHRE
+ * LVTS_OFFSETH
*
* Bits:
*
@@ -322,7 +322,7 @@ static int lvts_set_trips(struct thermal_zone_device *tz, int low, int high)
*/
pr_debug("%s: Setting high limit temperature interrupt: %d\n",
thermal_zone_device_type(tz), high);
- writel(raw_high, LVTS_HTHRE(base));
+ writel(raw_high, LVTS_OFFSETH(base));
return 0;
}
There are two kinds of temperature monitoring interrupts available: * High Offset, Low Offset * Hot, Hot to normal, Cold The code currently uses the hot/h2n/cold interrupts, however in a way that doesn't work: the cold threshold is left uninitialized, which prevents the other thresholds from ever triggering, and the h2n interrupt is used as the lower threshold, which prevents the hot interrupt from triggering again after the thresholds are updated by the thermal framework, since a hot interrupt can only trigger again after the hot to normal interrupt has been triggered. But better yet than addressing those issues, is to use the high/low offset interrupts instead. This way only two thresholds need to be managed, which have a simpler state machine, making them a better match to the thermal framework's high and low thresholds. Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver") Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> --- Changes in v2: - Added this commit drivers/thermal/mediatek/lvts_thermal.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)