From patchwork Sun May 7 15:03:35 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Maksim Kiselev X-Patchwork-Id: 13233753 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 8F26AC77B7C for ; Sun, 7 May 2023 15:06:41 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-Id:Date:Subject:Cc:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=/gXnbYUwa3utnp4epFvoMimUfCEQf2Emb7ezVJwFRHI=; b=RoQEe+FKZeF1gq 7NqzWSU4Pd6uRYARISiLZ6R9pQOrqlOFusX3+T/RqIFPIOH75THmfEoDmMhTllPsiDR5rB4lk11Z7 UWBkZ6pAOZV52Ik16+Nc7o9NHCfOXB3LyosRLiksv396HekKnXgnMu1ojcWNJMFIcEKcx/t4izrhA v4f8VrgWQ9W+AIawRVnRrogm5qettGMv6GXCi265IPpRTNozKBRqYHop1PwvW4GeOGbhTmicID5OH fpYa/Vv0yx53LySlxcgavlcFi1QWdacd/RjXX3gOAXy+7WwsPYTrU6UEMXG26I4jwp80fWuO1Px+g AwY1oURZIZt4/OpiLeLw==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.96 #2 (Red Hat Linux)) id 1pvfxQ-00GFQ7-2d; Sun, 07 May 2023 15:05:52 +0000 Received: from mail-wm1-x334.google.com ([2a00:1450:4864:20::334]) by bombadil.infradead.org with esmtps (Exim 4.96 #2 (Red Hat Linux)) id 1pvfxN-00GFO0-0j; Sun, 07 May 2023 15:05:50 +0000 Received: by mail-wm1-x334.google.com with SMTP id 5b1f17b1804b1-3f4000ec6ecso36464485e9.0; Sun, 07 May 2023 08:05:49 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20221208; t=1683471948; x=1686063948; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=T8Xbue+dZrUS0EtWBIjxZwNQ7G1HJWZPzEox+l8G5TM=; b=lhYBSHcPlF2D07Hfu6H7Wu4YygvzGxgAGC5eHWGKvZ22zVVCKMfCGvpQ9YArJQe1OP mM1eJURhuhVrw8FB8mgvUVatKwgvwGPWOxP9pnpCYU9krKRDY4fjz+6V5D1148vBl+EW HKrq1r6Mbgs/MRg4aOXfNjKeA8h7R3WW5S1qJUF5K5+5Cy4HsXBtD9kR85pqnJccAH2t WEOINL/VPVL7ka4d80LzZoBqk64PP5vpQySj3VVjukrs1JHQETGymuH5Q0V5wLAJ3jEX /5efgaJXLFEwn2j/Eld6zSVvYry0Ni7YKAgdc01c+V5BCYVc0ICRje7nBstJCqDCfw4z IolQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1683471948; x=1686063948; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=T8Xbue+dZrUS0EtWBIjxZwNQ7G1HJWZPzEox+l8G5TM=; b=GOqiV/w54KC5gN4GX4JdofXSlBQDZNbyinRTdVYT48PAzGVsU/fOPmDIldKUbJLJz6 cGZx5Tf7mjEtHf5aEpUjLE6qEoGhJVzXxqTjgCmOzr1rTLFcuSElej7j3NNtY/sOhgbB IoN8b6rGGpetQfVXd3nHRLaucbkgHRWkK8ACvJtGnXhAL8E+W9ZGKBjel56yo9BSk3Mu jzMo5ULK9eXAC+mRC2rN0mvXkEs/UQwvMWM1wl77Qj0nDGnW8PX07lz3sHujhPOqxL1n 6j4hFtv+9infAkAwns9ZM04BOOY0jvkXQQGJJ1UklUX+GpDYs2M27vt88cR/KSJDWD3+ XGkA== X-Gm-Message-State: AC+VfDxeorUHPNgNaFC8UnLT+wfMnxhlj1naLof2h1PzTEd7t6CiHwjK 4zudsjf63LIHOQ0tZkukYto= X-Google-Smtp-Source: ACHHUZ6P7qXpFFPAPaFm0HGci22eWsFqTYayxZY/A76FX259w2o8wnK65Fpnavwew0z750xCUL9Mzg== X-Received: by 2002:a7b:c454:0:b0:3f4:2297:630a with SMTP id l20-20020a7bc454000000b003f42297630amr1380003wmi.20.1683471947766; Sun, 07 May 2023 08:05:47 -0700 (PDT) Received: from localhost.localdomain ([176.221.215.212]) by smtp.gmail.com with ESMTPSA id e15-20020a5d594f000000b0030771c6e443sm8437998wri.42.2023.05.07.08.05.44 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sun, 07 May 2023 08:05:47 -0700 (PDT) From: Maksim Kiselev To: Andre Przywara Cc: Icenowy Zheng , Maksim Kiselev , Mark Brown , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Chen-Yu Tsai , Jernej Skrabec , Samuel Holland , Paul Walmsley , Palmer Dabbelt , Albert Ou , Cristian Ciocaltea , Maxime Ripard , linux-spi@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org, linux-riscv@lists.infradead.org Subject: [PATCH v4 3/5] spi: sun6i: add quirk for in-controller clock divider Date: Sun, 7 May 2023 18:03:35 +0300 Message-Id: <20230507150345.1971083-4-bigunclemax@gmail.com> X-Mailer: git-send-email 2.39.2 In-Reply-To: <20230507150345.1971083-1-bigunclemax@gmail.com> References: <20230507150345.1971083-1-bigunclemax@gmail.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20230507_080549_262062_2C8235EC X-CRM114-Status: GOOD ( 22.23 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Previously SPI controllers in Allwinner SoCs has a clock divider inside. However now the clock divider is removed and to set the transfer clock rate it's only needed to set the SPI module clock to the target value and configure a proper work mode. According to the datasheet there are three work modes: | SPI Sample Mode | SDM(bit13) | SDC(bit11) | Run Clock | |-------------------------|------------|------------|-----------| | normal sample | 1 | 0 | <= 24 MHz | | delay half cycle sample | 0 | 0 | <= 40 MHz | | delay one cycle sample | 0 | 1 | >= 80 MHz | Add a quirk for this kind of SPI controllers. Co-developed-by: Icenowy Zheng Signed-off-by: Maksim Kiselev --- drivers/spi/spi-sun6i.c | 91 +++++++++++++++++++++++++++-------------- 1 file changed, 61 insertions(+), 30 deletions(-) diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c index 01a01cd86db5..e4efab310469 100644 --- a/drivers/spi/spi-sun6i.c +++ b/drivers/spi/spi-sun6i.c @@ -42,7 +42,9 @@ #define SUN6I_TFR_CTL_CS_MANUAL BIT(6) #define SUN6I_TFR_CTL_CS_LEVEL BIT(7) #define SUN6I_TFR_CTL_DHB BIT(8) +#define SUN6I_TFR_CTL_SDC BIT(11) #define SUN6I_TFR_CTL_FBS BIT(12) +#define SUN6I_TFR_CTL_SDM BIT(13) #define SUN6I_TFR_CTL_XCH BIT(31) #define SUN6I_INT_CTL_REG 0x10 @@ -87,6 +89,7 @@ struct sun6i_spi_cfg { unsigned long fifo_depth; + bool has_clk_ctl; }; struct sun6i_spi { @@ -260,7 +263,7 @@ static int sun6i_spi_transfer_one(struct spi_master *master, struct spi_transfer *tfr) { struct sun6i_spi *sspi = spi_master_get_devdata(master); - unsigned int mclk_rate, div, div_cdr1, div_cdr2, timeout; + unsigned int div, div_cdr1, div_cdr2, timeout; unsigned int start, end, tx_time; unsigned int trig_level; unsigned int tx_len = 0, rx_len = 0; @@ -350,39 +353,65 @@ static int sun6i_spi_transfer_one(struct spi_master *master, sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg); - /* Ensure that we have a parent clock fast enough */ - mclk_rate = clk_get_rate(sspi->mclk); - if (mclk_rate < (2 * tfr->speed_hz)) { - clk_set_rate(sspi->mclk, 2 * tfr->speed_hz); - mclk_rate = clk_get_rate(sspi->mclk); - } + if (sspi->cfg->has_clk_ctl) { + unsigned int mclk_rate = clk_get_rate(sspi->mclk); - /* - * Setup clock divider. - * - * We have two choices there. Either we can use the clock - * divide rate 1, which is calculated thanks to this formula: - * SPI_CLK = MOD_CLK / (2 ^ cdr) - * Or we can use CDR2, which is calculated with the formula: - * SPI_CLK = MOD_CLK / (2 * (cdr + 1)) - * Wether we use the former or the latter is set through the - * DRS bit. - * - * First try CDR2, and if we can't reach the expected - * frequency, fall back to CDR1. - */ - div_cdr1 = DIV_ROUND_UP(mclk_rate, tfr->speed_hz); - div_cdr2 = DIV_ROUND_UP(div_cdr1, 2); - if (div_cdr2 <= (SUN6I_CLK_CTL_CDR2_MASK + 1)) { - reg = SUN6I_CLK_CTL_CDR2(div_cdr2 - 1) | SUN6I_CLK_CTL_DRS; - tfr->effective_speed_hz = mclk_rate / (2 * div_cdr2); + /* Ensure that we have a parent clock fast enough */ + if (mclk_rate < (2 * tfr->speed_hz)) { + clk_set_rate(sspi->mclk, 2 * tfr->speed_hz); + mclk_rate = clk_get_rate(sspi->mclk); + } + + /* + * Setup clock divider. + * + * We have two choices there. Either we can use the clock + * divide rate 1, which is calculated thanks to this formula: + * SPI_CLK = MOD_CLK / (2 ^ cdr) + * Or we can use CDR2, which is calculated with the formula: + * SPI_CLK = MOD_CLK / (2 * (cdr + 1)) + * Wether we use the former or the latter is set through the + * DRS bit. + * + * First try CDR2, and if we can't reach the expected + * frequency, fall back to CDR1. + */ + div_cdr1 = DIV_ROUND_UP(mclk_rate, tfr->speed_hz); + div_cdr2 = DIV_ROUND_UP(div_cdr1, 2); + if (div_cdr2 <= (SUN6I_CLK_CTL_CDR2_MASK + 1)) { + reg = SUN6I_CLK_CTL_CDR2(div_cdr2 - 1) | SUN6I_CLK_CTL_DRS; + tfr->effective_speed_hz = mclk_rate / (2 * div_cdr2); + } else { + div = min(SUN6I_CLK_CTL_CDR1_MASK, order_base_2(div_cdr1)); + reg = SUN6I_CLK_CTL_CDR1(div); + tfr->effective_speed_hz = mclk_rate / (1 << div); + } + + sun6i_spi_write(sspi, SUN6I_CLK_CTL_REG, reg); } else { - div = min(SUN6I_CLK_CTL_CDR1_MASK, order_base_2(div_cdr1)); - reg = SUN6I_CLK_CTL_CDR1(div); - tfr->effective_speed_hz = mclk_rate / (1 << div); + clk_set_rate(sspi->mclk, tfr->speed_hz); + tfr->effective_speed_hz = clk_get_rate(sspi->mclk); + + /* + * Configure work mode. + * + * There are three work modes depending on the controller clock + * frequency: + * - normal sample mode : CLK <= 24MHz SDM=1 SDC=0 + * - delay half-cycle sample mode : CLK <= 40MHz SDM=0 SDC=0 + * - delay one-cycle sample mode : CLK >= 80MHz SDM=0 SDC=1 + */ + reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG); + reg &= ~(SUN6I_TFR_CTL_SDM | SUN6I_TFR_CTL_SDC); + + if (tfr->effective_speed_hz <= 24000000) + reg |= SUN6I_TFR_CTL_SDM; + else if (tfr->effective_speed_hz >= 80000000) + reg |= SUN6I_TFR_CTL_SDC; + + sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg); } - sun6i_spi_write(sspi, SUN6I_CLK_CTL_REG, reg); /* Finally enable the bus - doing so before might raise SCK to HIGH */ reg = sun6i_spi_read(sspi, SUN6I_GBL_CTL_REG); reg |= SUN6I_GBL_CTL_BUS_ENABLE; @@ -701,10 +730,12 @@ static void sun6i_spi_remove(struct platform_device *pdev) static const struct sun6i_spi_cfg sun6i_a31_spi_cfg = { .fifo_depth = SUN6I_FIFO_DEPTH, + .has_clk_ctl = true, }; static const struct sun6i_spi_cfg sun8i_h3_spi_cfg = { .fifo_depth = SUN8I_FIFO_DEPTH, + .has_clk_ctl = true, }; static const struct of_device_id sun6i_spi_match[] = {