| Message ID | 20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-8-56eb7a4d5b8e@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | drm/meson: add support for MIPI DSI Display | expand |
Le mar. 30 mai 2023 à 09:38, Neil Armstrong <neil.armstrong@linaro.org> a écrit : > > If the case the HDMI controller fails to bind, we try to unbind > all components before calling drm_dev_put() which makes drm_bridge_detach() > crash because unbinding the HDMI controller frees the bridge memory. > > The solution is the unbind all components at the end like in the remove > path. > > Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> > --- > drivers/gpu/drm/meson/meson_drv.c | 23 ++++++++++++++--------- > 1 file changed, 14 insertions(+), 9 deletions(-) > > diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c > index ca6d1e59e5d9..e060279dc80a 100644 > --- a/drivers/gpu/drm/meson/meson_drv.c > +++ b/drivers/gpu/drm/meson/meson_drv.c > @@ -316,32 +316,34 @@ static int meson_drv_bind_master(struct device *dev, bool has_components) > goto exit_afbcd; > > if (has_components) { > - ret = component_bind_all(drm->dev, drm); > + ret = component_bind_all(dev, drm); > if (ret) { > dev_err(drm->dev, "Couldn't bind all components\n"); > + /* Do not try to unbind */ > + has_components = false; > goto exit_afbcd; > } > } > > ret = meson_encoder_hdmi_init(priv); > if (ret) > - goto unbind_all; > + goto exit_afbcd; > > ret = meson_plane_create(priv); > if (ret) > - goto unbind_all; > + goto exit_afbcd; > > ret = meson_overlay_create(priv); > if (ret) > - goto unbind_all; > + goto exit_afbcd; > > ret = meson_crtc_create(priv); > if (ret) > - goto unbind_all; > + goto exit_afbcd; > > ret = request_irq(priv->vsync_irq, meson_irq, 0, drm->driver->name, drm); > if (ret) > - goto unbind_all; > + goto exit_afbcd; > > drm_mode_config_reset(drm); > > @@ -359,15 +361,18 @@ static int meson_drv_bind_master(struct device *dev, bool has_components) > > uninstall_irq: > free_irq(priv->vsync_irq, drm); > -unbind_all: > - if (has_components) > - component_unbind_all(drm->dev, drm); > exit_afbcd: > if (priv->afbcd.ops) > priv->afbcd.ops->exit(priv); > free_drm: > drm_dev_put(drm); > > + meson_encoder_hdmi_remove(priv); > + meson_encoder_cvbs_remove(priv); > + > + if (has_components) > + component_unbind_all(dev, drm); > + > return ret; > } > > > -- > 2.34.1 > Works fine on a Khadas VIM3 using a TS050 panel, Thanks Reviewed-by: Nicolas Belin <nbelin@baylibre.com> Tested-by: Nicolas Belin <nbelin@baylibre.com>
diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c index ca6d1e59e5d9..e060279dc80a 100644 --- a/drivers/gpu/drm/meson/meson_drv.c +++ b/drivers/gpu/drm/meson/meson_drv.c @@ -316,32 +316,34 @@ static int meson_drv_bind_master(struct device *dev, bool has_components) goto exit_afbcd; if (has_components) { - ret = component_bind_all(drm->dev, drm); + ret = component_bind_all(dev, drm); if (ret) { dev_err(drm->dev, "Couldn't bind all components\n"); + /* Do not try to unbind */ + has_components = false; goto exit_afbcd; } } ret = meson_encoder_hdmi_init(priv); if (ret) - goto unbind_all; + goto exit_afbcd; ret = meson_plane_create(priv); if (ret) - goto unbind_all; + goto exit_afbcd; ret = meson_overlay_create(priv); if (ret) - goto unbind_all; + goto exit_afbcd; ret = meson_crtc_create(priv); if (ret) - goto unbind_all; + goto exit_afbcd; ret = request_irq(priv->vsync_irq, meson_irq, 0, drm->driver->name, drm); if (ret) - goto unbind_all; + goto exit_afbcd; drm_mode_config_reset(drm); @@ -359,15 +361,18 @@ static int meson_drv_bind_master(struct device *dev, bool has_components) uninstall_irq: free_irq(priv->vsync_irq, drm); -unbind_all: - if (has_components) - component_unbind_all(drm->dev, drm); exit_afbcd: if (priv->afbcd.ops) priv->afbcd.ops->exit(priv); free_drm: drm_dev_put(drm); + meson_encoder_hdmi_remove(priv); + meson_encoder_cvbs_remove(priv); + + if (has_components) + component_unbind_all(dev, drm); + return ret; }
If the case the HDMI controller fails to bind, we try to unbind all components before calling drm_dev_put() which makes drm_bridge_detach() crash because unbinding the HDMI controller frees the bridge memory. The solution is the unbind all components at the end like in the remove path. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> --- drivers/gpu/drm/meson/meson_drv.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-)