| Message ID | 20230530120345.2874900-10-o.rempel@pengutronix.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Maintenance updates for Protonic Holland boards | expand |
diff --git a/arch/arm/boot/dts/imx6dl-alti6p.dts b/arch/arm/boot/dts/imx6dl-alti6p.dts index e6a4e2770640..4989e8d069a1 100644 --- a/arch/arm/boot/dts/imx6dl-alti6p.dts +++ b/arch/arm/boot/dts/imx6dl-alti6p.dts @@ -361,6 +361,7 @@ &usbh1 { pinctrl-0 = <&pinctrl_usbh1>; phy_type = "utmi"; dr_mode = "host"; + over-current-active-low; status = "okay"; }; @@ -370,9 +371,18 @@ &usbotg { pinctrl-0 = <&pinctrl_usbotg>; phy_type = "utmi"; dr_mode = "host"; + over-current-active-low; status = "okay"; }; +&usbphynop1 { + status = "disabled"; +}; + +&usbphynop2 { + status = "disabled"; +}; + &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>;
Fix USB-related warnings in imx6dl alti6p device tree by disabling unused usbphynop1 and usbphynop2 USB PHYs and properly configuring over-current detection on related ports. This fixes the following warnings with the current kernel: usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests imx_usb 2184200.usb: No over-current polarity defined Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- arch/arm/boot/dts/imx6dl-alti6p.dts | 10 ++++++++++ 1 file changed, 10 insertions(+)