| Message ID | 20230530124538.621760-6-olivier.moysan@foss.st.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ARM: dts: stm32: add adc internal channels on stm32mp15 | expand |
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index 8beb901be506..66ed5f9921ba 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -103,10 +103,20 @@ &adc { vref-supply = <&vdda>; status = "disabled"; adc1: adc@0 { - st,adc-channels = <0 1 6>; - /* 16.5 ck_cycles sampling time */ - st,min-sample-time-nsecs = <400>; status = "okay"; + channel@0 { + reg = <0>; + /* 16.5 ck_cycles sampling time */ + st,min-sample-time-ns = <400>; + }; + channel@1 { + reg = <1>; + st,min-sample-time-ns = <400>; + }; + channel@6 { + reg = <6>; + st,min-sample-time-ns = <400>; + }; }; };
Use STM32 ADC generic bindings instead of legacy bindings on STM32MP157c-ed1 board. The STM32 ADC specific binding to declare channels has been deprecated, hence adopt the generic IIO channels bindings, instead. The STM32MP151 device tree now exposes internal channels using the generic binding. This makes the change mandatory here to avoid a mixed use of legacy and generic binding, which is not supported by the driver. Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> --- arch/arm/boot/dts/stm32mp157c-ed1.dts | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)