rtc: stm32: remove dedicated wakeup management

Commit Message

Amelie Delaunay May 31, 2023, 12:27 p.m. UTC

From: Alexandre Torgue <[e-mail]>

There is no more needs to use a dedicated wake up interrupt for RTC as
EXTI block manages by itself now all interrupt lines.

Dedicated wakeup interrupt has been introduced with STM32 MP1 support
commit b72252b6580c ("rtc: stm32: add stm32mp1 rtc support") because GIC &
EXTI interrupts were not yet linked in EXTI driver.

Removing this interrupt won't break compatibility with device trees which
do use two interrupts entries: it could only prevent wakeup from low power
modes on STM32MP1x, but platform power management is not yet available.

Signed-off-by: Alexandre Torgue <[e-mail]>
Signed-off-by: Amelie Delaunay <[e-mail]>
---
 drivers/rtc/rtc-stm32.c | 28 +++++-----------------------
 1 file changed, 5 insertions(+), 23 deletions(-)

Comments

Alexandre Belloni June 6, 2023, 9:42 p.m. UTC | #1

On Wed, 31 May 2023 14:27:31 +0200, Amelie Delaunay wrote:
> There is no more needs to use a dedicated wake up interrupt for RTC as
> EXTI block manages by itself now all interrupt lines.
> 
> Dedicated wakeup interrupt has been introduced with STM32 MP1 support
> commit b72252b6580c ("rtc: stm32: add stm32mp1 rtc support") because GIC &
> EXTI interrupts were not yet linked in EXTI driver.
> 
> [...]

Applied, thanks!

[1/1] rtc: stm32: remove dedicated wakeup management
      commit: 38e0689b27f8b9a0085815b2446b12f685d028aa

Best regards,

Patch

diff --git a/drivers/rtc/rtc-stm32.c b/drivers/rtc/rtc-stm32.c
index 229cb2847cc4..3d36e11cff80 100644
--- a/drivers/rtc/rtc-stm32.c
+++ b/drivers/rtc/rtc-stm32.c
@@ -114,7 +114,6 @@  struct stm32_rtc_data {
 	void (*clear_events)(struct stm32_rtc *rtc, unsigned int flags);
 	bool has_pclk;
 	bool need_dbp;
-	bool has_wakeirq;
 };
 
 struct stm32_rtc {
@@ -127,7 +126,6 @@  struct stm32_rtc {
 	struct clk *rtc_ck;
 	const struct stm32_rtc_data *data;
 	int irq_alarm;
-	int wakeirq_alarm;
 };
 
 static void stm32_rtc_wpr_unlock(struct stm32_rtc *rtc)
@@ -547,7 +545,6 @@  static void stm32_rtc_clear_events(struct stm32_rtc *rtc,
 static const struct stm32_rtc_data stm32_rtc_data = {
 	.has_pclk = false,
 	.need_dbp = true,
-	.has_wakeirq = false,
 	.regs = {
 		.tr = 0x00,
 		.dr = 0x04,
@@ -569,7 +566,6 @@  static const struct stm32_rtc_data stm32_rtc_data = {
 static const struct stm32_rtc_data stm32h7_rtc_data = {
 	.has_pclk = true,
 	.need_dbp = true,
-	.has_wakeirq = false,
 	.regs = {
 		.tr = 0x00,
 		.dr = 0x04,
@@ -600,7 +596,6 @@  static void stm32mp1_rtc_clear_events(struct stm32_rtc *rtc,
 static const struct stm32_rtc_data stm32mp1_data = {
 	.has_pclk = true,
 	.need_dbp = false,
-	.has_wakeirq = true,
 	.regs = {
 		.tr = 0x00,
 		.dr = 0x04,
@@ -779,19 +774,12 @@  static int stm32_rtc_probe(struct platform_device *pdev)
 	}
 
 	ret = device_init_wakeup(&pdev->dev, true);
-	if (rtc->data->has_wakeirq) {
-		rtc->wakeirq_alarm = platform_get_irq(pdev, 1);
-		if (rtc->wakeirq_alarm > 0) {
-			ret = dev_pm_set_dedicated_wake_irq(&pdev->dev,
-							    rtc->wakeirq_alarm);
-		} else {
-			ret = rtc->wakeirq_alarm;
-			if (rtc->wakeirq_alarm == -EPROBE_DEFER)
-				goto err;
-		}
-	}
 	if (ret)
-		dev_warn(&pdev->dev, "alarm can't wake up the system: %d", ret);
+		goto err;
+
+	ret = dev_pm_set_wake_irq(&pdev->dev, rtc->irq_alarm);
+	if (ret)
+		goto err;
 
 	platform_set_drvdata(pdev, rtc);
 
@@ -879,9 +867,6 @@  static int stm32_rtc_suspend(struct device *dev)
 	if (rtc->data->has_pclk)
 		clk_disable_unprepare(rtc->pclk);
 
-	if (device_may_wakeup(dev))
-		return enable_irq_wake(rtc->irq_alarm);
-
 	return 0;
 }
 
@@ -903,9 +888,6 @@  static int stm32_rtc_resume(struct device *dev)
 		return ret;
 	}
 
-	if (device_may_wakeup(dev))
-		return disable_irq_wake(rtc->irq_alarm);
-
 	return ret;
 }
 #endif