diff mbox series

[V2,12/14] arm64: dts: ti: k3-am65-iot*: Fixup reference to phandles array

Message ID 20230606182220.3661956-13-nm@ti.com (mailing list archive)
State New, archived
Headers show
Series arm64: dts: ti: Fix up references to phandles | expand

Commit Message

Nishanth Menon June 6, 2023, 6:22 p.m. UTC 
When referring to array of phandles, using <> to separate the array
entries is better notation as it makes potential errors with phandle and
cell arguments easier to catch. Fix the outliers to be consistent with
the rest of the usage.

Cc: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
Changes from V1
* no change other than picking up Reviewed-by
V1: https://lore.kernel.org/r/20230601152636.858553-11-nm@ti.com

 .../boot/dts/ti/k3-am65-iot2050-common.dtsi    | 17 ++++++++---------
 .../dts/ti/k3-am6548-iot2050-advanced-m2.dts   | 18 ++++++++----------
 2 files changed, 16 insertions(+), 19 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index 96ac2b476b11..ac5460bd0c52 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -385,13 +385,12 @@  &main_gpio0 {
 
 &wkup_gpio0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <
-		&arduino_io_d2_to_d3_pins_default
-		&arduino_i2c_aio_switch_pins_default
-		&arduino_io_oe_pins_default
-		&push_button_pins_default
-		&db9_com_mode_pins_default
-	>;
+	pinctrl-0 =
+		<&arduino_io_d2_to_d3_pins_default>,
+		<&arduino_i2c_aio_switch_pins_default>,
+		<&arduino_io_oe_pins_default>,
+		<&push_button_pins_default>,
+		<&db9_com_mode_pins_default>;
 	gpio-line-names =
 		/* 0..9 */
 		"wkup_gpio0-base", "", "", "", "UART0-mode1", "UART0-mode0",
@@ -712,11 +711,11 @@  mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
 &mcu_r5fss0_core0 {
 	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
 			<&mcu_r5fss0_core0_memory_region>;
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
 };
 
 &mcu_r5fss0_core1 {
 	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
 			<&mcu_r5fss0_core1_memory_region>;
-	mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>;
+	mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>;
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
index 9400e35882a6..9209b5a7baa4 100644
--- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
@@ -66,20 +66,18 @@  AM65X_IOPAD(0x001c, PIN_INPUT_PULLUP, 7)  /* (C23) GPIO1_89 */
 
 &main_gpio0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <
-		&main_m2_pcie_mux_control
-		&arduino_io_d4_to_d9_pins_default
-	>;
+	pinctrl-0 =
+		<&main_m2_pcie_mux_control>,
+		<&arduino_io_d4_to_d9_pins_default>;
 };
 
 &main_gpio1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <
-		&main_m2_enable_pins_default
-		&main_pmx0_m2_config_pins_default
-		&main_pmx1_m2_config_pins_default
-		&cp2102n_reset_pin_default
-	>;
+	pinctrl-0 =
+		<&main_m2_enable_pins_default>,
+		<&main_pmx0_m2_config_pins_default>,
+		<&main_pmx1_m2_config_pins_default>,
+		<&cp2102n_reset_pin_default>;
 };
 
 /*