diff mbox series

[V2,04/14] arm64: dts: ti: k3-j721e-beagleboneai64: Move eeprom WP gpio pinctrl to eeprom node

Message ID 20230606182220.3661956-5-nm@ti.com (mailing list archive)
State New, archived
Headers show
Series arm64: dts: ti: Fix up references to phandles | expand

Commit Message

Nishanth Menon June 6, 2023, 6:22 p.m. UTC 
Move the eeprom WP GPIO mux configuration to be part of the eeprom node
instead of the I2C node.

Cc: Robert Nelson <robertcnelson@gmail.com>
Suggested-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
New Patch

 arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
index 1a65d3617a29..a3f602e4fb45 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
@@ -639,12 +639,14 @@  &main_i2c6 {
 &wkup_i2c0 {
 	status = "okay";
 	pinctrl-names = "default";
-	pinctrl-0 = <&wkup_i2c0_pins_default &eeprom_wp_pins_default>;
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
 	clock-frequency = <400000>;
 
 	eeprom@50 {
 		compatible = "atmel,24c04";
 		reg = <0x50>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&eeprom_wp_pins_default>;
 	};
 };