| Message ID | 20230607063139.621351-3-dario.binacchi@amarulasolutions.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add display support on the stm32f746-disco board | expand |
Hi Dario On 6/7/23 08:31, Dario Binacchi wrote: > Add pin configurations for using LTDC (LCD-tft Display Controller) on > stm32f746-disco board. > > Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> > --- > > (no changes since v1) > > arch/arm/boot/dts/stm32f7-pinctrl.dtsi | 35 ++++++++++++++++++++++++++ > 1 file changed, 35 insertions(+) > > diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi > index 9f65403295ca..f3f90b9bcd61 100644 > --- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi > +++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi > @@ -365,6 +365,41 @@ pins2 { > bias-pull-up; > }; > }; > + > + > + ltdc_pins_a: ltdc-pins-a-0 { ltdc-pins-a-0 --> ltdc-pins-0 is a bit cleaner. I know that I have to fix sdio pins nodes in this file to keep the same spirit for all group names. If there is no V3 I wil do it directly when I'll apply DT patches if you agree. Alex > + pins { > + pinmux = <STM32_PINMUX('E', 4, AF14)>, /* LCD_B0 */ > + <STM32_PINMUX('G',12, AF9)>, /* LCD_B4 */ > + <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */ > + <STM32_PINMUX('I',10, AF14)>, /* LCD_HSYNC */ > + <STM32_PINMUX('I',14, AF14)>, /* LCD_CLK */ > + <STM32_PINMUX('I',15, AF14)>, /* LCD_R0 */ > + <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */ > + <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */ > + <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */ > + <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */ > + <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */ > + <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */ > + <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */ > + <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */ > + <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */ > + <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */ > + <STM32_PINMUX('J',10, AF14)>, /* LCD_G3 */ > + <STM32_PINMUX('J',11, AF14)>, /* LCD_G4 */ > + <STM32_PINMUX('J',13, AF14)>, /* LCD_B1 */ > + <STM32_PINMUX('J',14, AF14)>, /* LCD_B2 */ > + <STM32_PINMUX('J',15, AF14)>, /* LCD_B3 */ > + <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */ > + <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */ > + <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */ > + <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */ > + <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */ > + <STM32_PINMUX('K', 6, AF14)>, /* LCD_B7 */ > + <STM32_PINMUX('K', 7, AF14)>; /* LCD_DE */ > + slew-rate = <2>; > + }; > + }; > }; > }; > };
Hi Alexandre, On Thu, Jun 8, 2023 at 2:42 PM Alexandre TORGUE <alexandre.torgue@foss.st.com> wrote: > > Hi Dario > > On 6/7/23 08:31, Dario Binacchi wrote: > > Add pin configurations for using LTDC (LCD-tft Display Controller) on > > stm32f746-disco board. > > > > Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> > > --- > > > > (no changes since v1) > > > > arch/arm/boot/dts/stm32f7-pinctrl.dtsi | 35 ++++++++++++++++++++++++++ > > 1 file changed, 35 insertions(+) > > > > diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi > > index 9f65403295ca..f3f90b9bcd61 100644 > > --- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi > > +++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi > > @@ -365,6 +365,41 @@ pins2 { > > bias-pull-up; > > }; > > }; > > + > > + > > + ltdc_pins_a: ltdc-pins-a-0 { > > ltdc-pins-a-0 --> ltdc-pins-0 is a bit cleaner. I know that I have to > fix sdio pins nodes in this file to keep the same spirit for all group > names. I have looked at the file arch/arm/boot/dts/stm32f7-pinctrl.dtsi, and based on the following nodes: usart1_pins_a: usart1-0 i2c1_pins_b: i2c1-0 can1_pins_a: can1-0 I have decided to rename ltdc-pins-a-0 to ltdc-0. I hope you agree. Thanks and regards, Dario > > If there is no V3 I wil do it directly when I'll apply DT patches if you > agree. > > Alex > > > > + pins { > > + pinmux = <STM32_PINMUX('E', 4, AF14)>, /* LCD_B0 */ > > + <STM32_PINMUX('G',12, AF9)>, /* LCD_B4 */ > > + <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */ > > + <STM32_PINMUX('I',10, AF14)>, /* LCD_HSYNC */ > > + <STM32_PINMUX('I',14, AF14)>, /* LCD_CLK */ > > + <STM32_PINMUX('I',15, AF14)>, /* LCD_R0 */ > > + <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */ > > + <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */ > > + <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */ > > + <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */ > > + <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */ > > + <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */ > > + <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */ > > + <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */ > > + <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */ > > + <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */ > > + <STM32_PINMUX('J',10, AF14)>, /* LCD_G3 */ > > + <STM32_PINMUX('J',11, AF14)>, /* LCD_G4 */ > > + <STM32_PINMUX('J',13, AF14)>, /* LCD_B1 */ > > + <STM32_PINMUX('J',14, AF14)>, /* LCD_B2 */ > > + <STM32_PINMUX('J',15, AF14)>, /* LCD_B3 */ > > + <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */ > > + <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */ > > + <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */ > > + <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */ > > + <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */ > > + <STM32_PINMUX('K', 6, AF14)>, /* LCD_B7 */ > > + <STM32_PINMUX('K', 7, AF14)>; /* LCD_DE */ > > + slew-rate = <2>; > > + }; > > + }; > > }; > > }; > > }; >
diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi index 9f65403295ca..f3f90b9bcd61 100644 --- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi @@ -365,6 +365,41 @@ pins2 { bias-pull-up; }; }; + + + ltdc_pins_a: ltdc-pins-a-0 { + pins { + pinmux = <STM32_PINMUX('E', 4, AF14)>, /* LCD_B0 */ + <STM32_PINMUX('G',12, AF9)>, /* LCD_B4 */ + <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */ + <STM32_PINMUX('I',10, AF14)>, /* LCD_HSYNC */ + <STM32_PINMUX('I',14, AF14)>, /* LCD_CLK */ + <STM32_PINMUX('I',15, AF14)>, /* LCD_R0 */ + <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */ + <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */ + <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */ + <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */ + <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */ + <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */ + <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */ + <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */ + <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */ + <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */ + <STM32_PINMUX('J',10, AF14)>, /* LCD_G3 */ + <STM32_PINMUX('J',11, AF14)>, /* LCD_G4 */ + <STM32_PINMUX('J',13, AF14)>, /* LCD_B1 */ + <STM32_PINMUX('J',14, AF14)>, /* LCD_B2 */ + <STM32_PINMUX('J',15, AF14)>, /* LCD_B3 */ + <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */ + <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */ + <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */ + <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */ + <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */ + <STM32_PINMUX('K', 6, AF14)>, /* LCD_B7 */ + <STM32_PINMUX('K', 7, AF14)>; /* LCD_DE */ + slew-rate = <2>; + }; + }; }; }; };
Add pin configurations for using LTDC (LCD-tft Display Controller) on stm32f746-disco board. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> --- (no changes since v1) arch/arm/boot/dts/stm32f7-pinctrl.dtsi | 35 ++++++++++++++++++++++++++ 1 file changed, 35 insertions(+)