| Message ID | 20230624131632.2972546-4-bigunclemax@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Allwinner R329/D1/R528/T113s Dual/Quad SPI modes support | expand |
Dne sobota, 24. junij 2023 ob 15:16:24 CEST je Maksim Kiselev napisal(a): > Add pinmux node that describes pins on PC port which required for > QSPI mode. > > Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com> > --- > arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi > b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi index > 1bb1e5cae602..9f754dd03d85 100644 > --- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi > +++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi > @@ -131,6 +131,13 @@ uart3_pb_pins: uart3-pb-pins { > pins = "PB6", "PB7"; > function = "uart3"; > }; > + > + /omit-if-no-ref/ > + qspi0_pc_pins: qspi0-pc-pins { > + pins = "PC2", "PC3", "PC4", "PC5", "PC6", > + "PC7"; > + function = "spi0"; > + }; Sorry for late review, but it seems I'm missing something. D1 manual says those are pins for ordinary SPI, with HOLD and WP signals. Can they be repurposed for quad SPI? Best regards, Jernej > }; > > ccu: clock-controller@2001000 {
пн, 31 июл. 2023 г. в 01:30, Jernej Škrabec <jernej.skrabec@gmail.com>: > > Dne sobota, 24. junij 2023 ob 15:16:24 CEST je Maksim Kiselev napisal(a): > > Add pinmux node that describes pins on PC port which required for > > QSPI mode. > > > > Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com> > > --- > > arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi | 7 +++++++ > > 1 file changed, 7 insertions(+) > > > > diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi > > b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi index > > 1bb1e5cae602..9f754dd03d85 100644 > > --- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi > > +++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi > > @@ -131,6 +131,13 @@ uart3_pb_pins: uart3-pb-pins { > > pins = "PB6", "PB7"; > > function = "uart3"; > > }; > > + > > + /omit-if-no-ref/ > > + qspi0_pc_pins: qspi0-pc-pins { > > + pins = "PC2", "PC3", "PC4", "PC5", > "PC6", > > + "PC7"; > > + function = "spi0"; > > + }; > > Sorry for late review, but it seems I'm missing something. D1 manual says > those are pins for ordinary SPI, with HOLD and WP signals. Can they be > repurposed for quad SPI? > Yes, they can. Here is a quote from D1 datasheet (9.3.3.8 SPI Quad-Input/Quad-Output Mode): "Using the quad mode allows data to be transferred to or from the device at 4 times the rate of standard single mode, the data can be read at fast speed using four data bits (MOSI, MISO, IO2 (WP#) and IO3 (HOLD#)) at the same time."
Dne ponedeljek, 31. julij 2023 ob 17:22:11 CEST je Maxim Kiselev napisal(a): > пн, 31 июл. 2023 г. в 01:30, Jernej Škrabec <jernej.skrabec@gmail.com>: > > Dne sobota, 24. junij 2023 ob 15:16:24 CEST je Maksim Kiselev napisal(a): > > > Add pinmux node that describes pins on PC port which required for > > > QSPI mode. > > > > > > Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com> > > > --- > > > > > > arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi | 7 +++++++ > > > 1 file changed, 7 insertions(+) > > > > > > diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi > > > b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi index > > > 1bb1e5cae602..9f754dd03d85 100644 > > > --- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi > > > +++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi > > > @@ -131,6 +131,13 @@ uart3_pb_pins: uart3-pb-pins { > > > > > > pins = "PB6", "PB7"; > > > function = "uart3"; > > > > > > }; > > > > > > + > > > + /omit-if-no-ref/ > > > + qspi0_pc_pins: qspi0-pc-pins { > > > + pins = "PC2", "PC3", "PC4", "PC5", > > > > "PC6", > > > > > + "PC7"; > > > + function = "spi0"; > > > + }; > > > > Sorry for late review, but it seems I'm missing something. D1 manual says > > those are pins for ordinary SPI, with HOLD and WP signals. Can they be > > repurposed for quad SPI? > > Yes, they can. Here is a quote from D1 datasheet (9.3.3.8 SPI > Quad-Input/Quad-Output Mode): > "Using the quad mode allows data to be transferred to or from the > device at 4 times the rate of standard single mode, the data can be > read > at fast speed using four data bits (MOSI, MISO, IO2 (WP#) and IO3 > (HOLD#)) at the same time." Alright then. Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Best regards, Jernej
diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi index 1bb1e5cae602..9f754dd03d85 100644 --- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi +++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi @@ -131,6 +131,13 @@ uart3_pb_pins: uart3-pb-pins { pins = "PB6", "PB7"; function = "uart3"; }; + + /omit-if-no-ref/ + qspi0_pc_pins: qspi0-pc-pins { + pins = "PC2", "PC3", "PC4", "PC5", "PC6", + "PC7"; + function = "spi0"; + }; }; ccu: clock-controller@2001000 {
Add pinmux node that describes pins on PC port which required for QSPI mode. Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com> --- arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi | 7 +++++++ 1 file changed, 7 insertions(+)