| Message ID | 20230704173407.590544-1-dario.binacchi@amarulasolutions.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/2] ARM: dts: stm32: add pin map for i2c3 controller on stm32f7 | expand |
diff --git a/arch/arm/boot/dts/st/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32f7-pinctrl.dtsi index 9f65403295ca..c8dfda7bd04f 100644 --- a/arch/arm/boot/dts/st/stm32f7-pinctrl.dtsi +++ b/arch/arm/boot/dts/st/stm32f7-pinctrl.dtsi @@ -171,6 +171,16 @@ pins { }; }; + i2c3_pins_a: i2c3-0 { + pins { + pinmux = <STM32_PINMUX('H', 8, AF4)>, /* I2C3_SDA */ + <STM32_PINMUX('H', 7, AF4)>; /* I2C3_SCL */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + usbotg_hs_pins_a: usbotg-hs-0 { pins { pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */
Add pin configurations for using i2c3 controller on stm32f7. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> --- arch/arm/boot/dts/st/stm32f7-pinctrl.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)