| Message ID | 20230713-seama-partitions-v4-2-69e577453d40@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | (no cover subject) | expand |
On 7/12/2023 3:16 PM, Linus Walleij wrote: > This adds SEAMA compatibles to the firmware partition of these > two D-Link devices. > > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Applied by adjusting the patch after 6.5-rc1 moved the various DTS files to vendor directories. Thanks Linus!
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts index 555fbe41dd8f..cf3000b07eea 100644 --- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts @@ -33,6 +33,7 @@ partitions { #size-cells = <1>; partition@0 { + compatible = "seama"; label = "firmware"; reg = <0x00000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts index d945a20b06e0..3551f855ff20 100644 --- a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts @@ -149,6 +149,7 @@ partitions { * partitions: this device uses SEAMA. */ firmware@0 { + compatible = "seama"; label = "firmware"; reg = <0x00000000 0x08000000>; };
This adds SEAMA compatibles to the firmware partition of these two D-Link devices. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 1 + arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts | 1 + 2 files changed, 2 insertions(+)