@@ -151,6 +151,7 @@ imx8mm-venice-gw72xx-0x-rs232-rts-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-ven
imx8mm-venice-gw72xx-0x-rs422-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs422.dtbo
imx8mm-venice-gw72xx-0x-rs485-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs485.dtbo
imx8mm-venice-gw73xx-0x-imx219-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-imx219.dtbo
+imx8mm-venice-gw73xx-0x-rpidsi-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rpidsi.dtbo
imx8mm-venice-gw73xx-0x-rs232-rts-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs232-rts.dtbo
imx8mm-venice-gw73xx-0x-rs422-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs422.dtbo
imx8mm-venice-gw73xx-0x-rs485-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs485.dtbo
@@ -160,6 +161,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rs232-rts.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rs422.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rs485.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-imx219.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rpidsi.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs232-rts.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs422.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs485.dtb
new file mode 100644
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+ compatible = "gw,imx8mm-gw73xx-0x", "fsl,imx8mm";
+
+ panel {
+ compatible = "powertip,ph800480t013-idf02";
+ power-supply = <&attiny>;
+ backlight = <&attiny>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&bridge_out>;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ attiny: regulator@45 {
+ compatible = "raspberrypi,7inch-touchscreen-panel-regulator";
+ reg = <0x45>;
+ };
+};
+
+&lcdif {
+ status = "okay";
+};
+
+&mipi_dsi {
+ samsung,burst-clock-frequency = <891000000>;
+ samsung,esc-clock-frequency = <54000000>;
+ samsung,pll-clock-frequency = <27000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ bridge@0 {
+ compatible = "toshiba,tc358762";
+ reg = <0>;
+ vddc-supply = <&attiny>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ bridge_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ bridge_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ dsi_out: endpoint {
+ remote-endpoint = <&bridge_in>;
+ };
+ };
+ };
+};
Add support for the following Raspberry Pi displays: - DFROBOT DRF0678 7in 800x480 TFT DSI capacitive touch - DFROBOT DRF0550 5in 800x480 TFT DSI capacitive touch Both have the following hardware: - FocalTech FT5406 10pt touch controller (with no interrupt) - Powertip PH800480T013-IDF02 compatible panel - Toshiba TC358762 compatible DSI to DBI bridge - ATTINY based regulator used for backlight controller and panel enable Support is added via a device-tree overlay. The touch controller is not yet supported as polling mode is needed. Signed-off-by: Tim Harvey <tharvey@gateworks.com> --- v2: - add newline between properties and child node --- arch/arm64/boot/dts/freescale/Makefile | 2 + .../imx8mm-venice-gw73xx-0x-rpidsi.dtso | 90 +++++++++++++++++++ 2 files changed, 92 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rpidsi.dtso