Message ID | 20230721081948.1185360-2-alexander.stein@ew.tq-group.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [v3,1/2] ARM: dts: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties | expand |
On 21/07/2023 10:19, Alexander Stein wrote: > Use id-gpios and vbus-gpios instead. > > Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> > Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip > Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> #mediatek > Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> > Acked-by: Shawn Guo <shawnguo@kernel.org> > Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > Changes in v3: > * Rebased to next-20230721 > * Split from bindings patch I think you wanted to split it per subsystem, right? That's why you resent/v3? But the split did not happen. If you decide not to split, then try to figure out: who should pick up this patchset? Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi index 5dbec71747c3..61c2a63efc6d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi @@ -109,7 +109,7 @@ extcon_usb0: extcon-usb0 { compatible = "linux,extcon-usb-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0_extcon>; - id-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>; + id-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts index fef62acd1152..fe492b773edb 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts @@ -24,7 +24,7 @@ extcon_usbotg: extcon-usbotg0 { compatible = "linux,extcon-usb-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbcon0>; - id-gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>; + id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; }; pcie0_refclk: pcie0-refclk { diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts index fffdb7bbf889..0c38f7b51763 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts @@ -43,12 +43,12 @@ cpus_fixed_vproc1: regulator-vproc-buck1 { extcon_usb: extcon_iddig { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pio 12 GPIO_ACTIVE_HIGH>; + id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>; }; extcon_usb1: extcon_iddig1 { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pio 14 GPIO_ACTIVE_HIGH>; + id-gpios = <&pio 14 GPIO_ACTIVE_HIGH>; }; usb_p0_vbus: regulator-usb-p0-vbus { diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts index 5122963d8743..607d65ddba9e 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts @@ -41,7 +41,7 @@ hdmi_connector_in: endpoint { extcon_usb: extcon_iddig { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pio 16 GPIO_ACTIVE_HIGH>; + id-gpios = <&pio 16 GPIO_ACTIVE_HIGH>; }; usb_p1_vbus: regulator@0 { diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts index e0993e32ee38..f6eeb2598846 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts @@ -77,7 +77,7 @@ usb2513 { usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&tlmm 121 GPIO_ACTIVE_HIGH>; + id-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index 16353e3b7fab..385b178314db 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -99,14 +99,14 @@ button { usb2_id: usb2-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>; + id-gpios = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb2_vbus_det_gpio>; }; usb3_id: usb3-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>; + id-gpios = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb3_vbus_det_gpio>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts index 5ad49fe999db..84723c9b73b4 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts @@ -48,7 +48,7 @@ button-volume-up { usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; + id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts index 1c43f3d6a0b4..47da738661bf 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts @@ -52,7 +52,7 @@ led-0 { usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&tlmm 69 GPIO_ACTIVE_HIGH>; + id-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts index f4dbc515c47a..4aeeee24cedc 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts @@ -75,7 +75,7 @@ led-green { usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; + id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&usb_id_default>; pinctrl-names = "default"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts index 4239c8fda11b..484e488a5eca 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts @@ -80,7 +80,7 @@ led-2 { usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&tlmm 117 GPIO_ACTIVE_HIGH>; + id-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts index 9757182fba3e..d73294af1a06 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts @@ -68,7 +68,7 @@ led-0 { usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; + id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts index c94d36b38651..8e238976ab1c 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts @@ -56,7 +56,7 @@ button-volume-up { usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; + id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts index 0633e3006f17..89b6aebba404 100644 --- a/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts +++ b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts @@ -33,7 +33,7 @@ chosen { usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; + id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&usb_id_default>; pinctrl-names = "default"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts index 4a0645db0ae1..6374c5f53d9a 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts @@ -24,5 +24,5 @@ &usb_detect { }; &usb3_id { - id-gpio = <&tlmm 24 GPIO_ACTIVE_LOW>; + id-gpios = <&tlmm 24 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi index b4b770a9277d..d55e4075040f 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi @@ -71,7 +71,7 @@ panel_tvdd: tvdd-regulator { usb3_id: usb3-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&tlmm 25 GPIO_ACTIVE_LOW>; + id-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&usb_detect>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts index b35e2d9f428c..b6a214bea70f 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts @@ -31,7 +31,7 @@ aliases { */ extcon_usb: extcon-usb { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>; + id-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>; }; gpio-hall-sensors { diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi index 687e96068cb2..876c6921ddf0 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi @@ -89,8 +89,8 @@ vph_pwr: vph-pwr-regulator { extcon_usb: extcon-usb { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>; - vbus-gpio = <&tlmm 128 GPIO_ACTIVE_HIGH>; + id-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>; + vbus-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cc_dir_default &usb_detect_en>; }; diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts index 0b23d5bb3f26..2ed39d402d3f 100644 --- a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts +++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts @@ -43,7 +43,7 @@ key-volup { */ extcon_usb: extcon-usb { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&tlmm 58 GPIO_ACTIVE_HIGH>; + id-gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; }; hdmi-out { diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi index 3033723fc6ff..87d0293c728d 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi @@ -150,7 +150,7 @@ cont_splash_mem: splash@9d400000 { */ extcon_usb: extcon-usb { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&tlmm 58 GPIO_ACTIVE_HIGH>; + id-gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts index 8fb2d1788742..3c47410ba94c 100644 --- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts +++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts @@ -85,7 +85,7 @@ framebuffer_mem: memory@9d400000 { */ extcon_usb: extcon-usb { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&tlmm 58 GPIO_ACTIVE_HIGH>; + id-gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts index de85086c65ad..e42a4e710cd2 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts @@ -42,7 +42,7 @@ framebuffer0: framebuffer@5c000000 { extcon_usb: extcon-usb { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>; + id-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; }; gpio-keys { diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts index 7c58d1299a60..272bc85f1719 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts @@ -63,7 +63,7 @@ cmdline_mem: memory@ffd00000 { extcon_usb: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>; + id-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; }; gpio-keys { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index aa3e21bd6c8f..20e3f41efe97 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -27,7 +27,7 @@ module_led: led-0 { extcon_usb3: extcon-usb3 { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; + id-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb3_id>; };