@@ -21,6 +21,25 @@ chosen {
stdout-path = "serial2:1500000n8";
};
+ vcc12v_dcin: vcc12v-dcin-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc12v_dcin";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ vcc5v0_sys: vcc5v0-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
v3v3_sys: v3v3-sys-regulator {
compatible = "regulator-fixed";
regulator-name = "v3v3_sys";
@@ -11,15 +11,6 @@ aliases {
mmc0 = &emmc;
};
- vcc5v0_sys: vcc5v0-sys-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
vccio_flash: vccio-flash-regulator {
compatible = "regulator-fixed";
enable-active-high;
The Main supply volatge for Edgeble Neu2 IO board is 12V DC. Add the 12v supply regulator for it and input to vcc5v0_sys. Since the power regulator is part of IO board circuit, move the regulator in IO dts file. Signed-off-by: Jagan Teki <jagan@edgeble.ai> --- .../dts/rockchip/rv1126-edgeble-neu2-io.dts | 19 +++++++++++++++++++ .../dts/rockchip/rv1126-edgeble-neu2.dtsi | 9 --------- 2 files changed, 19 insertions(+), 9 deletions(-)