| Message ID | 20230802040347.2264339-1-nm@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: ti: k3: Fixup remaining pin group node names for make dtbs checks | expand |
* Nishanth Menon <nm@ti.com> [230802 04:03]: > Fix up outstanding pingroup node names to be compliant with the > upcoming pinctrl-single schema. Thanks looks good to me: Reviewed-by: Tony Lindgren <tony@atomide.com>
Hi Nishanth Menon, On Tue, 01 Aug 2023 23:03:47 -0500, Nishanth Menon wrote: > Fix up outstanding pingroup node names to be compliant with the > upcoming pinctrl-single schema. > > I have applied the following to branch ti-k3-dts-next on [1]. Thank you! [1/1] arm64: dts: ti: k3: Fixup remaining pin group node names for make dtbs checks commit: 7a649518c13bc6cbbc83f27eda9d1b05b45fe3ac All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. [1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts index 7c1402b0fa2d..e07ddff22e07 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts @@ -432,7 +432,7 @@ AM62X_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D10) MCU_I2C0_SDA */ >; }; - gbe_pmx_obsclk: gbe-pmx-clk-default { + gbe_pmx_obsclk: gbe-pmx-obsclk-default-pins { pinctrl-single,pins = < AM62X_MCU_IOPAD(0x0004, PIN_OUTPUT, 1) /* (B8) MCU_SPI0_CS1.MCU_OBSCLK0 */ >; diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi index e73458ca6900..e9419c4fe605 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi @@ -10,7 +10,7 @@ */ &main_pmx0 { - cp2102n_reset_pin_default: cp2102n-reset-pin-default { + cp2102n_reset_pin_default: cp2102n-reset-default-pins { pinctrl-single,pins = < /* (AF12) GPIO1_24, used as cp2102 reset */ AM65X_IOPAD(0x01e0, PIN_OUTPUT, 7) diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index 973a89b04a22..734b051c9700 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -192,7 +192,7 @@ AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */ >; }; - wkup_pca554_default: wkup-pca554-default { + wkup_pca554_default: wkup-pca554-default-pins { pinctrl-single,pins = < AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */ >; diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts index cbe44634914f..774eb14ac907 100644 --- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts +++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts @@ -33,7 +33,7 @@ AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7) /* (AH13) GPIO1_17 */ >; }; - main_bkey_pcie_reset: main-bkey-pcie-reset { + main_bkey_pcie_reset: main-bkey-pcie-reset-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x01bc, PIN_OUTPUT_PULLUP, 7) /* (AG13) GPIO1_15 */ >; @@ -46,7 +46,7 @@ AM65X_IOPAD(0x01cc, PIN_INPUT_PULLUP, 7) /* (AD13) GPIO1_19 */ >; }; - main_m2_pcie_mux_control: main-m2-pcie-mux-control { + main_m2_pcie_mux_control: main-m2-pcie-mux-control-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0148, PIN_INPUT_PULLUP, 7) /* (AG22) GPIO0_82 */ AM65X_IOPAD(0x0160, PIN_INPUT_PULLUP, 7) /* (AE20) GPIO0_88 */ diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts index 21ad49cfa7ee..a8172ba55f4b 100644 --- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts @@ -273,7 +273,7 @@ J721S2_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (C25) WKUP_GPIO0_12.MCU_UART0_TXD */ >; }; - mcu_rpi_header_gpio0_pins0_default: mcu-rpi-header-gpio0-pins0-default { + mcu_rpi_header_gpio0_pins0_default: mcu-rpi-header-gpio0-default-pins-0 { pinctrl-single,pins = < J721S2_WKUP_IOPAD(0x118, PIN_INPUT, 7) /* (G25) WKUP_GPIO0_66 */ J721S2_WKUP_IOPAD(0x05C, PIN_INPUT, 7) /* (E24) MCU_SPI1_D0.WKUP_GPIO0_1 */ @@ -289,7 +289,7 @@ J721S2_WKUP_IOPAD(0x064, PIN_INPUT, 7) /* (C27) MCU_SPI1_CS0.WKUP_GPIO0_3 */ }; &wkup_pmx3 { - mcu_rpi_header_gpio0_pins1_default: mcu-rpi-header-gpio0-pins1-default { + mcu_rpi_header_gpio0_pins1_default: mcu-rpi-header-gpio0-default-pins-1 { pinctrl-single,pins = < J721S2_WKUP_IOPAD(0x000, PIN_INPUT, 7) /* (K26) WKUP_GPIO0_49 */ >;
Fix up outstanding pingroup node names to be compliant with the upcoming pinctrl-single schema. Signed-off-by: Nishanth Menon <nm@ti.com> --- arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 2 +- arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi | 2 +- arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 2 +- arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts | 4 ++-- arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts | 4 ++-- 5 files changed, 7 insertions(+), 7 deletions(-)