| Message ID | 20230815182948.212575-2-andreas@kemnade.info (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Input: zforce_ts: standard properties | expand |
On Tue, Aug 15, 2023 at 08:29:45PM +0200, Andreas Kemnade wrote: > Convert Neonode infrared touchscreen controller binding to DT schema. > > Signed-off-by: Andreas Kemnade <andreas@kemnade.info> > --- > .../input/touchscreen/neonode,zforce.yaml | 67 +++++++++++++++++++ > .../bindings/input/touchscreen/zforce_ts.txt | 34 ---------- > 2 files changed, 67 insertions(+), 34 deletions(-) > create mode 100644 Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml > delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml b/Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml > new file mode 100644 > index 000000000000..1c45adb2407a > --- /dev/null > +++ b/Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml > @@ -0,0 +1,67 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/input/touchscreen/neonode,zforce.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Neonode infrared touchscreen controller > + > +maintainers: > + - Heiko Stuebner <heiko.stuebner@bqreaders.com> It;d be good to CC the person you're volunteering! I've done so. > + > +properties: > + compatible: > + const: neonode,zforce > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + reset-gpios: > + maxItems: 1 > + > + irq-gpios: > + maxItems: 1 > + > + x-size: > + $ref: /schemas/types.yaml#/definitions/uint32 > + > + y-size: > + $ref: /schemas/types.yaml#/definitions/uint32 > + > + vdd-supply: true > + > +required: > + - compatible > + - reg > + - interrupts > + - reset-gpios > + - x-size > + - y-size > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + touchscreen@50 { > + compatible = "neonode,zforce"; > + reg = <0x50>; > + interrupts = <2 0>; > + vdd-supply = <®_zforce_vdd>; > + > + reset-gpios = <&gpio5 9 0>; /* RST */ > + irq-gpios = <&gpio5 6 0>; /* IRQ, optional */ > + > + x-size = <800>; > + y-size = <600>; > + }; > + }; > +... > diff --git a/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt > deleted file mode 100644 > index e3c27c4fd9c8..000000000000 > --- a/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt > +++ /dev/null > @@ -1,34 +0,0 @@ > -* Neonode infrared touchscreen controller > - > -Required properties: > -- compatible: must be "neonode,zforce" > -- reg: I2C address of the chip > -- interrupts: interrupt to which the chip is connected > -- reset-gpios: reset gpio the chip is connected to > -- x-size: horizontal resolution of touchscreen > -- y-size: vertical resolution of touchscreen > - > -Optional properties: > -- irq-gpios : interrupt gpio the chip is connected to > -- vdd-supply: Regulator controlling the controller supply > - > -Example: > - > - i2c@00000000 { > - /* ... */ > - > - zforce_ts@50 { > - compatible = "neonode,zforce"; > - reg = <0x50>; > - interrupts = <2 0>; > - vdd-supply = <®_zforce_vdd>; > - > - reset-gpios = <&gpio5 9 0>; /* RST */ > - irq-gpios = <&gpio5 6 0>; /* IRQ, optional */ > - > - x-size = <800>; > - y-size = <600>; > - }; > - > - /* ... */ > - }; > -- > 2.39.2 >
Hi, Am Mittwoch, 16. August 2023, 16:52:16 CEST schrieb Conor Dooley: > On Tue, Aug 15, 2023 at 08:29:45PM +0200, Andreas Kemnade wrote: > > Convert Neonode infrared touchscreen controller binding to DT schema. > > > > Signed-off-by: Andreas Kemnade <andreas@kemnade.info> > > --- > > .../input/touchscreen/neonode,zforce.yaml | 67 +++++++++++++++++++ > > .../bindings/input/touchscreen/zforce_ts.txt | 34 ---------- > > 2 files changed, 67 insertions(+), 34 deletions(-) > > create mode 100644 Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml > > delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt > > > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml b/Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml > > new file mode 100644 > > index 000000000000..1c45adb2407a > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml > > @@ -0,0 +1,67 @@ > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/input/touchscreen/neonode,zforce.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Neonode infrared touchscreen controller > > + > > +maintainers: > > + - Heiko Stuebner <heiko.stuebner@bqreaders.com> > > It;d be good to CC the person you're volunteering! I've done so. BQ the company is no more. So I have no issue with me being in there, afterall I did that driver back then, but I guess my main and permanent address of heiko@sntech.de might be more appropriate :-) Heiko > > + > > +properties: > > + compatible: > > + const: neonode,zforce > > + > > + reg: > > + maxItems: 1 > > + > > + interrupts: > > + maxItems: 1 > > + > > + reset-gpios: > > + maxItems: 1 > > + > > + irq-gpios: > > + maxItems: 1 > > + > > + x-size: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + > > + y-size: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + > > + vdd-supply: true > > + > > +required: > > + - compatible > > + - reg > > + - interrupts > > + - reset-gpios > > + - x-size > > + - y-size > > + > > +unevaluatedProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/interrupt-controller/irq.h> > > + > > + i2c { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + touchscreen@50 { > > + compatible = "neonode,zforce"; > > + reg = <0x50>; > > + interrupts = <2 0>; > > + vdd-supply = <®_zforce_vdd>; > > + > > + reset-gpios = <&gpio5 9 0>; /* RST */ > > + irq-gpios = <&gpio5 6 0>; /* IRQ, optional */ > > + > > + x-size = <800>; > > + y-size = <600>; > > + }; > > + }; > > +... > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt > > deleted file mode 100644 > > index e3c27c4fd9c8..000000000000 > > --- a/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt > > +++ /dev/null > > @@ -1,34 +0,0 @@ > > -* Neonode infrared touchscreen controller > > - > > -Required properties: > > -- compatible: must be "neonode,zforce" > > -- reg: I2C address of the chip > > -- interrupts: interrupt to which the chip is connected > > -- reset-gpios: reset gpio the chip is connected to > > -- x-size: horizontal resolution of touchscreen > > -- y-size: vertical resolution of touchscreen > > - > > -Optional properties: > > -- irq-gpios : interrupt gpio the chip is connected to > > -- vdd-supply: Regulator controlling the controller supply > > - > > -Example: > > - > > - i2c@00000000 { > > - /* ... */ > > - > > - zforce_ts@50 { > > - compatible = "neonode,zforce"; > > - reg = <0x50>; > > - interrupts = <2 0>; > > - vdd-supply = <®_zforce_vdd>; > > - > > - reset-gpios = <&gpio5 9 0>; /* RST */ > > - irq-gpios = <&gpio5 6 0>; /* IRQ, optional */ > > - > > - x-size = <800>; > > - y-size = <600>; > > - }; > > - > > - /* ... */ > > - }; >
On Wed, 16 Aug 2023 15:52:16 +0100 Conor Dooley <conor@kernel.org> wrote: > On Tue, Aug 15, 2023 at 08:29:45PM +0200, Andreas Kemnade wrote: > > Convert Neonode infrared touchscreen controller binding to DT schema. > > > > Signed-off-by: Andreas Kemnade <andreas@kemnade.info> > > --- > > .../input/touchscreen/neonode,zforce.yaml | 67 +++++++++++++++++++ > > .../bindings/input/touchscreen/zforce_ts.txt | 34 ---------- > > 2 files changed, 67 insertions(+), 34 deletions(-) > > create mode 100644 Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml > > delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt > > > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml b/Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml > > new file mode 100644 > > index 000000000000..1c45adb2407a > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml > > @@ -0,0 +1,67 @@ > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/input/touchscreen/neonode,zforce.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Neonode infrared touchscreen controller > > + > > +maintainers: > > + - Heiko Stuebner <heiko.stuebner@bqreaders.com> > > It;d be good to CC the person you're volunteering! I've done so. > well, apparently my get_maintainer.pl | confirm_and_add_addresses | git send-email script did not run in the kernel checkout I applied the patch to, so it did not catch that address. Sorry. BTW: What is common practice for the maintainer address in the binding in conversions? Here I looked at the commits of the plaintext binding. Regards, Andreas
On Wed, Aug 16, 2023 at 07:20:49PM +0200, Andreas Kemnade wrote: > On Wed, 16 Aug 2023 15:52:16 +0100 > Conor Dooley <conor@kernel.org> wrote: > > > On Tue, Aug 15, 2023 at 08:29:45PM +0200, Andreas Kemnade wrote: > > > Convert Neonode infrared touchscreen controller binding to DT schema. > > > > > > Signed-off-by: Andreas Kemnade <andreas@kemnade.info> > > > --- > > > .../input/touchscreen/neonode,zforce.yaml | 67 +++++++++++++++++++ > > > .../bindings/input/touchscreen/zforce_ts.txt | 34 ---------- > > > 2 files changed, 67 insertions(+), 34 deletions(-) > > > create mode 100644 Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml > > > delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt > > > > > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml b/Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml > > > new file mode 100644 > > > index 000000000000..1c45adb2407a > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml > > > @@ -0,0 +1,67 @@ > > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > > > +%YAML 1.2 > > > +--- > > > +$id: http://devicetree.org/schemas/input/touchscreen/neonode,zforce.yaml# > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > + > > > +title: Neonode infrared touchscreen controller > > > + > > > +maintainers: > > > + - Heiko Stuebner <heiko.stuebner@bqreaders.com> > > > > It;d be good to CC the person you're volunteering! I've done so. > > > well, apparently my get_maintainer.pl | confirm_and_add_addresses | git send-email > script did not run in the kernel checkout I applied the patch to, so it did > not catch that address. Sorry. > BTW: What is common practice for the maintainer address > in the binding in conversions? Here I looked at the commits of the plaintext binding. Yeah, that seems reasonable to me.
diff --git a/Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml b/Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml new file mode 100644 index 000000000000..1c45adb2407a --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/neonode,zforce.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Neonode infrared touchscreen controller + +maintainers: + - Heiko Stuebner <heiko.stuebner@bqreaders.com> + +properties: + compatible: + const: neonode,zforce + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + irq-gpios: + maxItems: 1 + + x-size: + $ref: /schemas/types.yaml#/definitions/uint32 + + y-size: + $ref: /schemas/types.yaml#/definitions/uint32 + + vdd-supply: true + +required: + - compatible + - reg + - interrupts + - reset-gpios + - x-size + - y-size + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@50 { + compatible = "neonode,zforce"; + reg = <0x50>; + interrupts = <2 0>; + vdd-supply = <®_zforce_vdd>; + + reset-gpios = <&gpio5 9 0>; /* RST */ + irq-gpios = <&gpio5 6 0>; /* IRQ, optional */ + + x-size = <800>; + y-size = <600>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt deleted file mode 100644 index e3c27c4fd9c8..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt +++ /dev/null @@ -1,34 +0,0 @@ -* Neonode infrared touchscreen controller - -Required properties: -- compatible: must be "neonode,zforce" -- reg: I2C address of the chip -- interrupts: interrupt to which the chip is connected -- reset-gpios: reset gpio the chip is connected to -- x-size: horizontal resolution of touchscreen -- y-size: vertical resolution of touchscreen - -Optional properties: -- irq-gpios : interrupt gpio the chip is connected to -- vdd-supply: Regulator controlling the controller supply - -Example: - - i2c@00000000 { - /* ... */ - - zforce_ts@50 { - compatible = "neonode,zforce"; - reg = <0x50>; - interrupts = <2 0>; - vdd-supply = <®_zforce_vdd>; - - reset-gpios = <&gpio5 9 0>; /* RST */ - irq-gpios = <&gpio5 6 0>; /* IRQ, optional */ - - x-size = <800>; - y-size = <600>; - }; - - /* ... */ - };
Convert Neonode infrared touchscreen controller binding to DT schema. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> --- .../input/touchscreen/neonode,zforce.yaml | 67 +++++++++++++++++++ .../bindings/input/touchscreen/zforce_ts.txt | 34 ---------- 2 files changed, 67 insertions(+), 34 deletions(-) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt