@@ -34,6 +34,7 @@ aliases {
};
memory@80000000 {
+ bootph-pre-ram;
device_type = "memory";
/* 2G RAM */
reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
@@ -107,6 +108,7 @@ rtos_ipc_memory_region: ipc-memories@a5000000 {
vusb_main: regulator-0 {
/* USB MAIN INPUT 5V DC */
+ bootph-all;
compatible = "regulator-fixed";
regulator-name = "vusb_main5v0";
regulator-min-microvolt = <5000000>;
@@ -117,6 +119,7 @@ vusb_main: regulator-0 {
vcc_3v3_sys: regulator-1 {
/* output of LP8733xx */
+ bootph-all;
compatible = "regulator-fixed";
regulator-name = "vcc_3v3_sys";
regulator-min-microvolt = <3300000>;
@@ -128,6 +131,7 @@ vcc_3v3_sys: regulator-1 {
vdd_mmc1: regulator-2 {
/* TPS2051BD */
+ bootph-all;
compatible = "regulator-fixed";
regulator-name = "vdd_mmc1";
regulator-min-microvolt = <3300000>;
@@ -234,6 +238,7 @@ led-7 {
&main_pmx0 {
main_mmc1_pins_default: main-mmc1-default-pins {
+ bootph-all;
pinctrl-single,pins = <
AM64X_IOPAD(0x029c, PIN_INPUT_PULLUP, 0) /* (C20) MMC1_SDWP */
AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */
@@ -248,6 +253,7 @@ AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* (K18) MMC1_DAT3 */
};
main_uart0_pins_default: main-uart0-default-pins {
+ bootph-all;
pinctrl-single,pins = <
AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */
AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */
@@ -257,6 +263,7 @@ AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */
};
main_uart1_pins_default: main-uart1-default-pins {
+ bootph-pre-ram;
pinctrl-single,pins = <
AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */
AM64X_IOPAD(0x024c, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */
@@ -266,12 +273,14 @@ AM64X_IOPAD(0x0244, PIN_OUTPUT, 0) /* (E14) UART1_TXD */
};
main_usb0_pins_default: main-usb0-default-pins {
+ bootph-all;
pinctrl-single,pins = <
AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */
>;
};
main_i2c0_pins_default: main-i2c0-default-pins {
+ bootph-all;
pinctrl-single,pins = <
AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */
AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */
@@ -279,6 +288,7 @@ AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */
};
main_i2c1_pins_default: main-i2c1-default-pins {
+ bootph-all;
pinctrl-single,pins = <
AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */
AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */
@@ -367,6 +377,7 @@ AM64X_IOPAD(0x00bc, PIN_INPUT, 7) /* (U8) GPIO0_46 */
};
&main_uart0 {
+ bootph-all;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_uart0_pins_default>;
@@ -375,12 +386,14 @@ &main_uart0 {
&main_uart1 {
/* main_uart1 is reserved for firmware usage */
+ bootph-pre-ram;
status = "reserved";
pinctrl-names = "default";
pinctrl-0 = <&main_uart1_pins_default>;
};
&main_i2c0 {
+ bootph-all;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c0_pins_default>;
@@ -393,12 +406,14 @@ eeprom@51 {
};
&main_i2c1 {
+ bootph-all;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c1_pins_default>;
clock-frequency = <400000>;
exp1: gpio@70 {
+ bootph-all;
compatible = "nxp,pca9538";
reg = <0x70>;
gpio-controller;
@@ -445,6 +460,7 @@ wlcore: wlcore@2 {
&sdhci1 {
/* SD/MMC */
+ bootph-all;
vmmc-supply = <&vdd_mmc1>;
pinctrl-names = "default";
bus-width = <4>;
@@ -454,11 +470,22 @@ &sdhci1 {
};
&serdes_ln_ctrl {
+ bootph-all;
idle-states = <AM64_SERDES0_LANE0_USB>;
};
+&serdes_refclk {
+ bootph-all;
+};
+
+&serdes_wiz0 {
+ bootph-all;
+};
+
&serdes0 {
+ bootph-all;
serdes0_usb_link: phy@0 {
+ bootph-all;
reg = <0>;
cdns,num-lanes = <1>;
#phy-cells = <0>;
@@ -468,10 +495,12 @@ serdes0_usb_link: phy@0 {
};
&usbss0 {
+ bootph-all;
ti,vbus-divider;
};
&usb0 {
+ bootph-all;
dr_mode = "host";
maximum-speed = "super-speed";
pinctrl-names = "default";
bootph-all as phase tag was added to dt-schema (dtschema/schemas/bootph.yaml) to describe various node usage during boot phases with DT. Describe the same for AM642-sk boot devices. Signed-off-by: Nishanth Menon <nm@ti.com> --- arch/arm64/boot/dts/ti/k3-am642-sk.dts | 29 ++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)