diff mbox series

spi: dt-bindings: arm,pl022: Move child node properties to separate schema

Message ID 20230914190033.1852600-1-robh@kernel.org (mailing list archive)
State New, archived
Headers show
Series spi: dt-bindings: arm,pl022: Move child node properties to separate schema | expand

Commit Message

Rob Herring Sept. 14, 2023, 7 p.m. UTC 
In order to validate SPI peripherals, SPI controller-specific child node
properties need to be in a separate schema, spi-peripheral-props.yaml,
which SPI peripheral schemas reference. Move the arm,pl022 child
properties to their own schema file and add a $ref in
spi-peripheral-props.yaml.

Signed-off-by: Rob Herring <robh@kernel.org>
---
 .../spi/arm,pl022-peripheral-props.yaml       | 61 +++++++++++++++++++
 .../bindings/spi/spi-peripheral-props.yaml    |  1 +
 .../devicetree/bindings/spi/spi-pl022.yaml    | 51 ----------------
 3 files changed, 62 insertions(+), 51 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/spi/arm,pl022-peripheral-props.yaml

Comments

Linus Walleij Sept. 15, 2023, 8:53 a.m. UTC | #1 
On Thu, Sep 14, 2023 at 9:00 PM Rob Herring <robh@kernel.org> wrote:

> In order to validate SPI peripherals, SPI controller-specific child node
> properties need to be in a separate schema, spi-peripheral-props.yaml,
> which SPI peripheral schemas reference. Move the arm,pl022 child
> properties to their own schema file and add a $ref in
> spi-peripheral-props.yaml.
>
> Signed-off-by: Rob Herring <robh@kernel.org>

That makes a lot of sense. Thanks Rob!
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
Mark Brown Sept. 16, 2023, 1:11 a.m. UTC | #2 
On Thu, 14 Sep 2023 14:00:17 -0500, Rob Herring wrote:
> In order to validate SPI peripherals, SPI controller-specific child node
> properties need to be in a separate schema, spi-peripheral-props.yaml,
> which SPI peripheral schemas reference. Move the arm,pl022 child
> properties to their own schema file and add a $ref in
> spi-peripheral-props.yaml.
> 
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/1] spi: dt-bindings: arm,pl022: Move child node properties to separate schema
      commit: b0ef97ac89a794ae786eb1ff1cd2b07e9d9ab3c4

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/spi/arm,pl022-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/arm,pl022-peripheral-props.yaml
new file mode 100644
index 000000000000..bb8b6863b109
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/arm,pl022-peripheral-props.yaml
@@ -0,0 +1,61 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/arm,pl022-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral-specific properties for Arm PL022 SPI controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+select: false
+
+properties:
+  pl022,interface:
+    description: SPI interface type
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0      # SPI
+      - 1      # Texas Instruments Synchronous Serial Frame Format
+      - 2      # Microwire (Half Duplex)
+
+  pl022,com-mode:
+    description: Specifies the transfer mode
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0      # interrupt mode
+      - 1      # polling mode
+      - 2      # DMA mode
+    default: 1
+
+  pl022,rx-level-trig:
+    description: Rx FIFO watermark level
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 4
+
+  pl022,tx-level-trig:
+    description: Tx FIFO watermark level
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 4
+
+  pl022,ctrl-len:
+    description: Microwire interface - Control length
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x03
+    maximum: 0x1f
+
+  pl022,wait-state:
+    description: Microwire interface - Wait state
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  pl022,duplex:
+    description: Microwire interface - Full/Half duplex
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
index 782a014b63a7..dc4f7bb47090 100644
--- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
@@ -115,6 +115,7 @@  properties:
 
 # The controller specific properties go here.
 allOf:
+  - $ref: arm,pl022-peripheral-props.yaml#
   - $ref: cdns,qspi-nor-peripheral-props.yaml#
   - $ref: samsung,spi-peripheral-props.yaml#
   - $ref: nvidia,tegra210-quad-peripheral-props.yaml#
diff --git a/Documentation/devicetree/bindings/spi/spi-pl022.yaml b/Documentation/devicetree/bindings/spi/spi-pl022.yaml
index 5e5a704a766e..7f174b7d0a26 100644
--- a/Documentation/devicetree/bindings/spi/spi-pl022.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-pl022.yaml
@@ -74,57 +74,6 @@  properties:
   resets:
     maxItems: 1
 
-patternProperties:
-  "^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-f]+$":
-    type: object
-    # SPI slave nodes must be children of the SPI master node and can
-    # contain the following properties.
-    properties:
-      pl022,interface:
-        description: SPI interface type
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum:
-          - 0      # SPI
-          - 1      # Texas Instruments Synchronous Serial Frame Format
-          - 2      # Microwire (Half Duplex)
-
-      pl022,com-mode:
-        description: Specifies the transfer mode
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum:
-          - 0      # interrupt mode
-          - 1      # polling mode
-          - 2      # DMA mode
-        default: 1
-
-      pl022,rx-level-trig:
-        description: Rx FIFO watermark level
-        $ref: /schemas/types.yaml#/definitions/uint32
-        minimum: 0
-        maximum: 4
-
-      pl022,tx-level-trig:
-        description: Tx FIFO watermark level
-        $ref: /schemas/types.yaml#/definitions/uint32
-        minimum: 0
-        maximum: 4
-
-      pl022,ctrl-len:
-        description: Microwire interface - Control length
-        $ref: /schemas/types.yaml#/definitions/uint32
-        minimum: 0x03
-        maximum: 0x1f
-
-      pl022,wait-state:
-        description: Microwire interface - Wait state
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [0, 1]
-
-      pl022,duplex:
-        description: Microwire interface - Full/Half duplex
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [0, 1]
-
 required:
   - compatible
   - reg