@@ -407,6 +407,7 @@ struct svs_platform_data {
* @dcbdet: svs efuse data
* @dcmdet: svs efuse data
* @turn_pt: 2-line turn point tells which opp_volt calculated by high/low bank
+ * @vbin_turn_pt: voltage bin turn point helps know which svsb_volt should be overridden
* @type: bank type to represent it is 2-line (high/low) bank or 1-line bank
*
* Svs bank will generate suitalbe voltages by below general math equation
@@ -469,6 +470,7 @@ struct svs_bank {
u32 dcbdet;
u32 dcmdet;
u32 turn_pt;
+ u32 vbin_turn_pt;
u32 type;
};
@@ -751,11 +753,12 @@ static int svs_status_debug_show(struct seq_file *m, void *v)
ret = thermal_zone_get_temp(svsb->tzd, &tzone_temp);
if (ret)
- seq_printf(m, "%s: temperature ignore, turn_pt = %u\n",
- svsb->name, svsb->turn_pt);
+ seq_printf(m, "%s: temperature ignore, vbin_turn_pt = %u, turn_pt = %u\n",
+ svsb->name, svsb->vbin_turn_pt, svsb->turn_pt);
else
- seq_printf(m, "%s: temperature = %d, turn_pt = %u\n",
- svsb->name, tzone_temp, svsb->turn_pt);
+ seq_printf(m, "%s: temperature = %d, vbin_turn_pt = %u, turn_pt = %u\n",
+ svsb->name, tzone_temp, svsb->vbin_turn_pt,
+ svsb->turn_pt);
for (i = 0; i < svsb->opp_count; i++) {
opp = dev_pm_opp_find_freq_exact(svsb->opp_dev,
@@ -952,6 +955,29 @@ static void svs_get_bank_volts_v3(struct svs_platform *svsp)
for (i = opp_start; i < opp_stop; i++)
if (svsb->volt_flags & SVSB_REMOVE_DVTFIXED_VOLT)
svsb->volt[i] -= svsb->dvt_fixed;
+
+ /* For voltage bin support */
+ if (svsb->opp_dfreq[0] > svsb->freq_base) {
+ svsb->volt[0] = svs_opp_volt_to_bank_volt(svsb->opp_dvolt[0],
+ svsb->volt_step,
+ svsb->volt_base);
+
+ /* Find voltage bin turn point */
+ for (i = 0; i < svsb->opp_count; i++) {
+ if (svsb->opp_dfreq[i] <= svsb->freq_base) {
+ svsb->vbin_turn_pt = i;
+ break;
+ }
+ }
+
+ /* Override svs bank voltages */
+ for (i = 1; i < svsb->vbin_turn_pt; i++)
+ svsb->volt[i] = interpolate(svsb->freq_pct[0],
+ svsb->freq_pct[svsb->vbin_turn_pt],
+ svsb->volt[0],
+ svsb->volt[svsb->vbin_turn_pt],
+ svsb->freq_pct[i]);
+ }
}
static void svs_set_bank_freq_pct_v3(struct svs_platform *svsp)
@@ -1069,6 +1095,29 @@ static void svs_get_bank_volts_v2(struct svs_platform *svsp)
for (i = 0; i < svsb->opp_count; i++)
svsb->volt[i] += svsb->volt_od;
+
+ /* For voltage bin support */
+ if (svsb->opp_dfreq[0] > svsb->freq_base) {
+ svsb->volt[0] = svs_opp_volt_to_bank_volt(svsb->opp_dvolt[0],
+ svsb->volt_step,
+ svsb->volt_base);
+
+ /* Find voltage bin turn point */
+ for (i = 0; i < svsb->opp_count; i++) {
+ if (svsb->opp_dfreq[i] <= svsb->freq_base) {
+ svsb->vbin_turn_pt = i;
+ break;
+ }
+ }
+
+ /* Override svs bank voltages */
+ for (i = 1; i < svsb->vbin_turn_pt; i++)
+ svsb->volt[i] = interpolate(svsb->freq_pct[0],
+ svsb->freq_pct[svsb->vbin_turn_pt],
+ svsb->volt[0],
+ svsb->volt[svsb->vbin_turn_pt],
+ svsb->freq_pct[i]);
+ }
}
static void svs_set_bank_freq_pct_v2(struct svs_platform *svsp)
@@ -1808,6 +1857,66 @@ static bool svs_mt8192_efuse_parsing(struct svs_platform *svsp)
return true;
}
+static bool svs_mt8188_efuse_parsing(struct svs_platform *svsp)
+{
+ struct svs_bank *svsb;
+ u32 idx, i, golden_temp;
+ int ret;
+
+ for (i = 0; i < svsp->efuse_max; i++)
+ if (svsp->efuse[i])
+ dev_info(svsp->dev, "M_HW_RES%d: 0x%08x\n",
+ i, svsp->efuse[i]);
+
+ if (!svsp->efuse[5]) {
+ dev_notice(svsp->dev, "svs_efuse[5] = 0x0?\n");
+ return false;
+ }
+
+ /* Svs efuse parsing */
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+
+ if (svsb->type == SVSB_LOW) {
+ svsb->mtdes = svsp->efuse[5] & GENMASK(7, 0);
+ svsb->bdes = (svsp->efuse[5] >> 16) & GENMASK(7, 0);
+ svsb->mdes = (svsp->efuse[5] >> 24) & GENMASK(7, 0);
+ svsb->dcbdet = (svsp->efuse[15] >> 16) & GENMASK(7, 0);
+ svsb->dcmdet = (svsp->efuse[15] >> 24) & GENMASK(7, 0);
+ } else if (svsb->type == SVSB_HIGH) {
+ svsb->mtdes = svsp->efuse[4] & GENMASK(7, 0);
+ svsb->bdes = (svsp->efuse[4] >> 16) & GENMASK(7, 0);
+ svsb->mdes = (svsp->efuse[4] >> 24) & GENMASK(7, 0);
+ svsb->dcbdet = svsp->efuse[14] & GENMASK(7, 0);
+ svsb->dcmdet = (svsp->efuse[14] >> 8) & GENMASK(7, 0);
+ }
+
+ svsb->vmax += svsb->dvt_fixed;
+ }
+
+ ret = svs_get_efuse_data(svsp, "t-calibration-data",
+ &svsp->tefuse, &svsp->tefuse_max);
+ if (ret)
+ return false;
+
+ for (i = 0; i < svsp->tefuse_max; i++)
+ if (svsp->tefuse[i] != 0)
+ break;
+
+ if (i == svsp->tefuse_max)
+ golden_temp = 50; /* All thermal efuse data are 0 */
+ else
+ golden_temp = (svsp->tefuse[0] >> 24) & GENMASK(7, 0);
+
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+ svsb->mts = 500;
+ svsb->bts = (((500 * golden_temp + 250460) / 1000) - 25) * 4;
+ }
+
+ return true;
+}
+
static bool svs_mt8183_efuse_parsing(struct svs_platform *svsp)
{
struct svs_bank *svsb;
@@ -2173,6 +2282,61 @@ static struct svs_bank svs_mt8192_banks[] = {
},
};
+static struct svs_bank svs_mt8188_banks[] = {
+ {
+ .sw_id = SVSB_GPU,
+ .type = SVSB_LOW,
+ .set_freq_pct = svs_set_bank_freq_pct_v3,
+ .get_volts = svs_get_bank_volts_v3,
+ .volt_flags = SVSB_REMOVE_DVTFIXED_VOLT,
+ .mode_support = SVSB_MODE_INIT02,
+ .opp_count = MAX_OPP_ENTRIES,
+ .freq_base = 640000000,
+ .turn_freq_base = 640000000,
+ .volt_step = 6250,
+ .volt_base = 400000,
+ .vmax = 0x38,
+ .vmin = 0x1c,
+ .age_config = 0x555555,
+ .dc_config = 0x555555,
+ .dvt_fixed = 0x1,
+ .vco = 0x10,
+ .chk_shift = 0x87,
+ .core_sel = 0x0fff0000,
+ .int_st = BIT(0),
+ .ctl0 = 0x00100003,
+ },
+ {
+ .sw_id = SVSB_GPU,
+ .type = SVSB_HIGH,
+ .set_freq_pct = svs_set_bank_freq_pct_v3,
+ .get_volts = svs_get_bank_volts_v3,
+ .tzone_name = "gpu1",
+ .volt_flags = SVSB_REMOVE_DVTFIXED_VOLT |
+ SVSB_MON_VOLT_IGNORE,
+ .mode_support = SVSB_MODE_INIT02 | SVSB_MODE_MON,
+ .opp_count = MAX_OPP_ENTRIES,
+ .freq_base = 880000000,
+ .turn_freq_base = 640000000,
+ .volt_step = 6250,
+ .volt_base = 400000,
+ .vmax = 0x38,
+ .vmin = 0x1c,
+ .age_config = 0x555555,
+ .dc_config = 0x555555,
+ .dvt_fixed = 0x4,
+ .vco = 0x10,
+ .chk_shift = 0x87,
+ .core_sel = 0x0fff0001,
+ .int_st = BIT(1),
+ .ctl0 = 0x00100003,
+ .tzone_htemp = 85000,
+ .tzone_htemp_voffset = 0,
+ .tzone_ltemp = 25000,
+ .tzone_ltemp_voffset = 7,
+ },
+};
+
static struct svs_bank svs_mt8183_banks[] = {
{
.sw_id = SVSB_CPU_LITTLE,
@@ -2286,6 +2450,15 @@ static const struct svs_platform_data svs_mt8192_platform_data = {
.bank_max = ARRAY_SIZE(svs_mt8192_banks),
};
+static const struct svs_platform_data svs_mt8188_platform_data = {
+ .name = "mt8188-svs",
+ .banks = svs_mt8188_banks,
+ .efuse_parsing = svs_mt8188_efuse_parsing,
+ .probe = svs_mt8192_platform_probe,
+ .regs = svs_regs_v2,
+ .bank_max = ARRAY_SIZE(svs_mt8188_banks),
+};
+
static const struct svs_platform_data svs_mt8183_platform_data = {
.name = "mt8183-svs",
.banks = svs_mt8183_banks,
@@ -2299,6 +2472,9 @@ static const struct of_device_id svs_of_match[] = {
{
.compatible = "mediatek,mt8192-svs",
.data = &svs_mt8192_platform_data,
+ }, {
+ .compatible = "mediatek,mt8188-svs",
+ .data = &svs_mt8188_platform_data,
}, {
.compatible = "mediatek,mt8183-svs",
.data = &svs_mt8183_platform_data,
MT8188 svs gpu uses 2-line high bank and low bank to optimize the voltage of opp table for higher and lower frequency respectively. Signed-off-by: Mark Tseng <chun-jen.tseng@mediatek.com> --- drivers/soc/mediatek/mtk-svs.c | 184 ++++++++++++++++++++++++++++++++- 1 file changed, 180 insertions(+), 4 deletions(-)