From patchwork Tue Sep 19 12:46:05 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mihai Sain X-Patchwork-Id: 13391343 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 79310CD5BAD for ; Tue, 19 Sep 2023 12:47:06 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=5ighNNOFQcordNrvzmmihBAxXjAcBZkF7w73YzL3d1c=; b=PxkjwxdCPDoKOI ysCAv20VV8/16xtUoMVfM9WXjy4AGIodSIVqJ+qCKmss1YA8aw8fuhN1FE8vaDXWtXhVqPZxfR1Wj RR4VQx9UHzcaxQejKHiLRWTCLiqbxsGR6y0IeT9MmxZliQHfadlhKVYvOgZSVNIg32TRqLw/SQ/+G VX4JktTSOvM62MmwKgtFTmEUBDS+o68GiC3DR5oCbOgW4GmWtB5sRs02s9knMn2x4UK8FF7ms9RpR kB8JLD+Mtjha9EnkLLFLs0HSwtndx0aJrdDjrYmOY33o6wDRHXGmfOk97VZqLBGHjaR0w4/ksCp2K fLM3LKd4J7CH8PZg43Wg==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.96 #2 (Red Hat Linux)) id 1qia7i-000Ruj-1S; Tue, 19 Sep 2023 12:46:38 +0000 Received: from esa.microchip.iphmx.com ([68.232.153.233]) by bombadil.infradead.org with esmtps (Exim 4.96 #2 (Red Hat Linux)) id 1qia7e-000Rsu-0h for linux-arm-kernel@lists.infradead.org; Tue, 19 Sep 2023 12:46:36 +0000 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=microchip.com; i=@microchip.com; q=dns/txt; s=mchp; t=1695127594; x=1726663594; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=Y2UuY2VJYxhmOhlmg3jLWigE7n2Uq9xmXn3g8xzqfYE=; b=al5IWZu7voMvxmdseXAPtmsj9qwarl4l4ivMbzrjFJLeooRoAi4IWBdb gSWND0XCzRW+ggK89WPLlbPXFxcHKmepuXWiBpUsDwZegsIxvkxp5K+ML Qydaiya6Cvx95dKZzKSCZqUpSnqwEgPZNccZMjZIG9LjgcAZSyaNdqL2L iw3zR5wkWZvsdkGbTVOav3jfaVhiRvOW/ueRVUtY5VQDG9WJ32bxDqp3t WSvmvceODRTbzlTQnEkxCSsluBIasF33EzZzgPbFYFrF0ge6v8SN392Te PJnxGdHWY6fDs2CCKiSunXk3zNKM2aQ4ymDDf2/uKKpOjxNbanHowqaWM w==; X-CSE-ConnectionGUID: hhj4fQFDRIWzql0Mbek80Q== X-CSE-MsgGUID: ZTuyIVPMSoWdrCxwX9Pe6A== X-ThreatScanner-Verdict: Negative X-IronPort-AV: E=Sophos;i="6.02,159,1688454000"; d="scan'208";a="235961908" X-Amp-Result: SKIPPED(no attachment in message) Received: from unknown (HELO email.microchip.com) ([170.129.1.10]) by esa5.microchip.iphmx.com with ESMTP/TLS/ECDHE-RSA-AES128-GCM-SHA256; 19 Sep 2023 05:46:33 -0700 Received: from chn-vm-ex01.mchp-main.com (10.10.85.143) by chn-vm-ex01.mchp-main.com (10.10.85.143) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.21; Tue, 19 Sep 2023 05:46:25 -0700 Received: from virtualbox.microchip.com (10.10.85.11) by chn-vm-ex01.mchp-main.com (10.10.85.143) with Microsoft SMTP Server id 15.1.2507.21 via Frontend Transport; Tue, 19 Sep 2023 05:46:22 -0700 From: Mihai Sain To: , , , , , , , , , , , CC: , Mihai Sain Subject: [PATCH v4 2/2] ARM: dts: at91: sama5d29_curiosity: Add device tree for sama5d29_curiosity board Date: Tue, 19 Sep 2023 15:46:05 +0300 Message-ID: <20230919124606.26898-3-mihai.sain@microchip.com> X-Mailer: git-send-email 2.42.0 In-Reply-To: <20230919124606.26898-1-mihai.sain@microchip.com> References: <20230919124606.26898-1-mihai.sain@microchip.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20230919_054634_370727_F791C819 X-CRM114-Status: GOOD ( 14.22 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Add initial device tree file for sama5d29_curiosity board. Signed-off-by: Mihai Sain --- arch/arm/boot/dts/microchip/Makefile | 2 + .../dts/microchip/at91-sama5d29_curiosity.dts | 600 ++++++++++++++++++ 2 files changed, 602 insertions(+) create mode 100644 arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts diff --git a/arch/arm/boot/dts/microchip/Makefile b/arch/arm/boot/dts/microchip/Makefile index 31e03747cdf4..efde9546c8f4 100644 --- a/arch/arm/boot/dts/microchip/Makefile +++ b/arch/arm/boot/dts/microchip/Makefile @@ -4,6 +4,7 @@ DTC_FLAGS_at91-sam9x60_curiosity := -@ DTC_FLAGS_at91-sam9x60ek := -@ DTC_FLAGS_at91-sama5d27_som1_ek := -@ DTC_FLAGS_at91-sama5d27_wlsom1_ek := -@ +DTC_FLAGS_at91-sama5d29_curiosity := -@ DTC_FLAGS_at91-sama5d2_icp := -@ DTC_FLAGS_at91-sama5d2_ptc_ek := -@ DTC_FLAGS_at91-sama5d2_xplained := -@ @@ -64,6 +65,7 @@ dtb-$(CONFIG_SOC_SAM_V7) += \ at91-nattis-2-natte-2.dtb \ at91-sama5d27_som1_ek.dtb \ at91-sama5d27_wlsom1_ek.dtb \ + at91-sama5d29_curiosity.dtb \ at91-sama5d2_icp.dtb \ at91-sama5d2_ptc_ek.dtb \ at91-sama5d2_xplained.dtb \ diff --git a/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts new file mode 100644 index 000000000000..6b02b7bcfd49 --- /dev/null +++ b/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts @@ -0,0 +1,600 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * at91-sama5d29_curiosity.dts - Device Tree file for SAMA5D29 Curiosity board + * + * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries + * + * Author: Mihai Sain + * + */ +/dts-v1/; +#include "sama5d29.dtsi" +#include "sama5d2-pinfunc.h" +#include +#include +#include + +/ { + model = "Microchip SAMA5D29 Curiosity"; + compatible = "microchip,sama5d29-curiosity", "atmel,sama5d29", "atmel,sama5d2", "atmel,sama5"; + + aliases { + serial0 = &uart0; // debug + serial1 = &uart1; // RPi + serial2 = &uart3; // mikro BUS 2 + serial3 = &uart4; // mikro BUS 1 + serial4 = &uart6; // flx1 Bluetooth + i2c0 = &i2c0; + i2c1 = &i2c1; + }; + + chosen { + bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait"; + stdout-path = "serial0:115200n8"; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <24000000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio_default>; + + button-1 { + label = "USER BUTTON"; + gpios = <&pioA PIN_PA17 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led_gpio_default>; + status = "okay"; + + led-red { + label = "red"; + gpios = <&pioA PIN_PA7 GPIO_ACTIVE_HIGH>; + }; + + led-green { + label = "green"; + gpios = <&pioA PIN_PA8 GPIO_ACTIVE_HIGH>; + }; + + led-blue { + label = "blue"; + gpios = <&pioA PIN_PA9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + memory@20000000 { + device_type = "memory"; + reg = <0x20000000 0x20000000>; + }; +}; + +&adc { + vddana-supply = <&vdd_3v3>; + vref-supply = <&vdd_3v3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>; + status = "okay"; +}; + +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0_default>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_default>; + status = "okay"; +}; + +&flx1 { + atmel,flexcom-mode = ; + status = "okay"; + + uart6: serial@200 { + pinctrl-0 = <&pinctrl_flx1_default>; + pinctrl-names = "default"; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; + }; +}; + +&flx4 { + atmel,flexcom-mode = ; + status = "okay"; + + spi6: spi@400 { + dmas = <0>, <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rpi_spi>; + status = "okay"; + }; +}; + +&i2c0 { + dmas = <0>, <0>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c0_default>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + sda-gpios = <&pioA PIN_PB31 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PC0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-sda-hold-time-ns = <350>; + status = "okay"; + + mcp16502@5b { + compatible = "microchip,mcp16502"; + reg = <0x5b>; + status = "okay"; + lpm-gpios = <&pioBU 0 GPIO_ACTIVE_LOW>; + + regulators { + vdd_3v3: VDD_IO { + regulator-name = "VDD_IO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + vddio_ddr: VDD_DDR { + regulator-name = "VDD_DDR"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1200000>; + regulator-changeable-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1200000>; + regulator-changeable-in-suspend; + regulator-mode = <4>; + }; + }; + + vdd_core: VDD_CORE { + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + vdd_ddr: VDD_OTHER { + regulator-name = "VDD_OTHER"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + regulator-changeable-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + regulator-changeable-in-suspend; + regulator-mode = <4>; + }; + }; + + LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2c1 { + dmas = <0>, <0>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + i2c-analog-filter; + i2c-digital-filter; + i2c-digital-filter-width-ns = <35>; + sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&pioA { + pinctrl_adc_default: adc-default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_adtrg_default: adtrg-default { + pinmux = ; + bias-pull-up; + }; + + pinctrl_can0_default: can0-default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_can1_default: can1-default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_debug_uart: debug-uart { + pinmux = , + ; + bias-disable; + }; + + pinctrl_flx1_default: flx1-default { + pinmux = , + , + , + ; + bias-disable; + }; + + pinctrl_i2c0_default: i2c0-default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_i2c0_gpio: i2c0-gpio-default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_i2c1_default: i2c1-default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_i2c1_gpio: i2c1-gpio-default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_key_gpio_default: key-gpio-default { + pinmux = ; + bias-pull-up; + }; + + pinctrl_led_gpio_default: led-gpio-default { + pinmux = , + , + ; + bias-pull-up; + }; + + pinctrl_mikrobus1_pwm: mikrobus1-pwm { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus2_pwm: mikrobus2-pwm { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus1_uart: mikrobus1-uart { + pinmux = , + ; + bias-disable; + }; + + pinctrl_mikrobus2_uart: mikrobus2-uart { + pinmux = , + ; + bias-disable; + }; + + pinctrl_qspi1_default: qspi1-default { + pinmux = , + , + , + , + , + ; + bias-disable; + }; + + pinctrl_rpi_spi: rpi-spi { + pinmux = , + , + , + , + ; + bias-disable; + }; + + pinctrl_rpi_uart: rpi-uart { + pinmux = , + ; + bias-disable; + }; + + pinctrl_sdmmc0_default: sdmmc0-default { + pinmux = , + , + , + , + , + , + , + ; + bias-disable; + }; + + pinctrl_sdmmc1_default: sdmmc1-default { + pinmux = , + , + , + , + , + , + ; + bias-disable; + }; + + pinctrl_spi1_default: spi1-default { + pinmux = , + , + , + , + , + , + ; + bias-disable; + }; + + pinctrl_usb_default: usb-default { + pinmux = ; + bias-disable; + }; + + pinctrl_usba_vbus: usba-vbus { + pinmux = ; + bias-disable; + }; +}; + +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus1_pwm &pinctrl_mikrobus2_pwm>; + status = "okay"; +}; + +&qspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi1_default>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + m25p,fast-read; + label = "atmel_qspi1"; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0xc0000>; + }; + + bootloaderenvred@100000 { + label = "bootloader env redundant"; + reg = <0x100000 0x40000>; + }; + + bootloaderenv@140000 { + label = "bootloader env"; + reg = <0x140000 0x40000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + }; +}; + +&sdmmc0 { + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc0_default>; + disable-wp; + status = "okay"; +}; + +&sdmmc1 { + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc1_default>; + disable-wp; + status = "okay"; +}; + +&shutdown_controller { + debounce-delay-us = <976>; + atmel,wakeup-rtc-timer; + + input@0 { + reg = <0>; + }; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + status = "okay"; +}; + +&tcb0 { + timer0: timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer1: timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_debug_uart>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rpi_uart>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus2_uart>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus1_uart>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; +}; + +&usb0 { + atmel,vbus-gpio = <&pioA PIN_PB13 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; +}; + +&usb1 { + num-ports = <3>; + atmel,vbus-gpio = <0 + &pioA PIN_PA6 GPIO_ACTIVE_HIGH + 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_default>; + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +};