diff mbox series

[v2] ARM: dts: imx6qdl-gw5904: add dt props for populating eth MAC addrs

Message ID 20230926194110.1451416-1-tharvey@gateworks.com (mailing list archive)
State New, archived
Headers show
Series [v2] ARM: dts: imx6qdl-gw5904: add dt props for populating eth MAC addrs | expand

Commit Message

Tim Harvey Sept. 26, 2023, 7:41 p.m. UTC 
Add device-tree props to allow boot firmware to populate MAC addresses.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
---
v2: rebased on latest tree now that arm dt files have moved
---
 arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

Comments

Shawn Guo Oct. 10, 2023, 1:13 a.m. UTC | #1 
On Tue, Sep 26, 2023 at 12:41:10PM -0700, Tim Harvey wrote:
> Add device-tree props to allow boot firmware to populate MAC addresses.
> 
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
> Reviewed-by: Fabio Estevam <festevam@gmail.com>

Applied, thanks!
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi
index 3375b3fd8d4c..1e723807ab4c 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi
@@ -52,6 +52,11 @@ 
 / {
 	/* these are used by bootloader for disabling nodes */
 	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &lan1;
+		ethernet2 = &lan2;
+		ethernet3 = &lan3;
+		ethernet4 = &lan4;
 		led0 = &led0;
 		led1 = &led1;
 		led2 = &led2;
@@ -237,32 +242,36 @@  ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				lan4: port@0 {
 					reg = <0>;
 					label = "lan4";
 					phy-handle = <&sw_phy0>;
 					phy-mode = "internal";
+					local-mac-address = [00 00 00 00 00 00];
 				};
 
-				port@1 {
+				lan3: port@1 {
 					reg = <1>;
 					label = "lan3";
 					phy-handle = <&sw_phy1>;
 					phy-mode = "internal";
+					local-mac-address = [00 00 00 00 00 00];
 				};
 
-				port@2 {
+				lan2: port@2 {
 					reg = <2>;
 					label = "lan2";
 					phy-handle = <&sw_phy2>;
 					phy-mode = "internal";
+					local-mac-address = [00 00 00 00 00 00];
 				};
 
-				port@3 {
+				lan1: port@3 {
 					reg = <3>;
 					label = "lan1";
 					phy-handle = <&sw_phy3>;
 					phy-mode = "internal";
+					local-mac-address = [00 00 00 00 00 00];
 				};
 
 				port@5 {