@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_IMX_DSP) += imx-dsp.o
obj-$(CONFIG_IMX_SCU) += imx-scu.o misc.o imx-scu-irq.o rm.o imx-scu-soc.o
-sec_enclave-objs = se_fw.o ele_common.o ele_base_msg.o
+sec_enclave-objs = se_fw.o ele_common.o ele_base_msg.o ele_fw_api.o
obj-${CONFIG_IMX_SEC_ENCLAVE} += sec_enclave.o
new file mode 100644
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2023 NXP
+ */
+
+#include <linux/dma-mapping.h>
+
+#include "ele_common.h"
+#include "ele_fw_api.h"
+
+int ele_init_fw(struct device *dev)
+{
+ struct ele_mu_priv *priv = dev_get_drvdata(dev);
+ unsigned int status;
+ int ret;
+
+ ret = imx_se_alloc_tx_rx_buf(priv);
+ if (ret)
+ return ret;
+
+ ret = plat_fill_cmd_msg_hdr(priv,
+ (struct mu_hdr *)&priv->tx_msg->header,
+ ELE_INIT_FW_REQ, ELE_INIT_FW_REQ_SZ,
+ false);
+ if (ret)
+ goto exit;
+
+ ret = imx_ele_msg_send_rcv(priv);
+ if (ret < 0)
+ goto exit;
+
+ ret = validate_rsp_hdr(priv,
+ priv->rx_msg->header,
+ ELE_INIT_FW_REQ,
+ ELE_INIT_FW_RSP_SZ,
+ false);
+ if (ret)
+ goto exit;
+
+ status = RES_STATUS(priv->rx_msg->data[0]);
+ if (status != priv->success_tag) {
+ dev_err(dev, "Command Id[%d], Response Failure = 0x%x",
+ ELE_INIT_FW_REQ, status);
+ ret = -1;
+ }
+
+exit:
+ imx_se_free_tx_rx_buf(priv);
+
+ return ret;
+}
new file mode 100644
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2023 NXP
+ */
+
+#ifndef ELE_FW_API_H
+#define ELE_FW_API_H
+
+#include <linux/hw_random.h>
+
+#define MESSAGING_VERSION_7 0x7
+
+#define ELE_INIT_FW_REQ 0x17
+#define ELE_INIT_FW_REQ_SZ 0x04
+#define ELE_INIT_FW_RSP_SZ 0x08
+
+
+int ele_init_fw(struct device *dev);
+
+#endif /* ELE_FW_API_H */
@@ -24,6 +24,7 @@
#include <linux/sys_soc.h>
#include "se_fw.h"
+#include "ele_fw_api.h"
#define SOC_ID_OF_IMX8ULP 0x084D
#define SOC_ID_OF_IMX93 0x9300
@@ -46,6 +47,7 @@ struct imx_info {
uint8_t *mbox_rx_name;
uint8_t *pool_name;
bool reserved_dma_ranges;
+ bool init_fw;
};
struct imx_info_list {
@@ -73,6 +75,7 @@ static const struct imx_info_list imx8ulp_info = {
.mbox_rx_name = "rx",
.pool_name = "fsl,sram",
.reserved_dma_ranges = true,
+ .init_fw = false,
},
},
};
@@ -95,8 +98,9 @@ static const struct imx_info_list imx93_info = {
.mbox_rx_name = "rx",
.pool_name = NULL,
.reserved_dma_ranges = true,
+ .init_fw = true,
},
- },
+ },
};
static const struct of_device_id se_fw_match[] = {
@@ -1228,6 +1232,13 @@ static int se_fw_probe(struct platform_device *pdev)
priv->flags |= RESERVED_DMA_POOL;
}
+ if (info->init_fw) {
+ /* start initializing ele fw */
+ ret = ele_init_fw(dev);
+ if (ret)
+ dev_err(dev, "Failed to initialize ele fw.\n");
+ }
+
if (info->socdev) {
ret = imx_soc_device_register(dev, info);
if (ret) {
On imx93 platforms, exchange init-fw message with enclave's firmware is to be done. Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com> --- drivers/firmware/imx/Makefile | 2 +- drivers/firmware/imx/ele_fw_api.c | 51 +++++++++++++++++++++++++++++++ drivers/firmware/imx/ele_fw_api.h | 20 ++++++++++++ drivers/firmware/imx/se_fw.c | 13 +++++++- 4 files changed, 84 insertions(+), 2 deletions(-) create mode 100644 drivers/firmware/imx/ele_fw_api.c create mode 100644 drivers/firmware/imx/ele_fw_api.h