diff mbox series

gpio: aspeed: fix the GPIO number passed to pinctrl_gpio_set_config()

Message ID 20231003073926.10771-1-brgl@bgdev.pl (mailing list archive)
State New, archived
Headers show
Series gpio: aspeed: fix the GPIO number passed to pinctrl_gpio_set_config() | expand

Commit Message

Bartosz Golaszewski Oct. 3, 2023, 7:39 a.m. UTC 
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

pinctrl_gpio_set_config() expects the GPIO number from the global GPIO
numberspace, not the controller-relative offset, which needs to be added
to the chip base.

Fixes: 5ae4cb94b313 ("gpio: aspeed: Add debounce support")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 drivers/gpio/gpio-aspeed.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Andy Shevchenko Oct. 3, 2023, 8:54 a.m. UTC | #1 
On Tue, Oct 03, 2023 at 09:39:26AM +0200, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> 
> pinctrl_gpio_set_config() expects the GPIO number from the global GPIO
> numberspace, not the controller-relative offset, which needs to be added
> to the chip base.

Right, because it has no clue what chip this offset is related to.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Andrew Jeffery Oct. 5, 2023, 1:12 a.m. UTC | #2 
On Tue, 2023-10-03 at 09:39 +0200, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> 
> pinctrl_gpio_set_config() expects the GPIO number from the global GPIO
> numberspace, not the controller-relative offset, which needs to be added
> to the chip base.
> 
> Fixes: 5ae4cb94b313 ("gpio: aspeed: Add debounce support")
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>

Thanks!

> ---
>  drivers/gpio/gpio-aspeed.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c
> index da33bbbdacb9..58f107194fda 100644
> --- a/drivers/gpio/gpio-aspeed.c
> +++ b/drivers/gpio/gpio-aspeed.c
> @@ -973,7 +973,7 @@ static int aspeed_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
>  	else if (param == PIN_CONFIG_BIAS_DISABLE ||
>  			param == PIN_CONFIG_BIAS_PULL_DOWN ||
>  			param == PIN_CONFIG_DRIVE_STRENGTH)
> -		return pinctrl_gpio_set_config(offset, config);
> +		return pinctrl_gpio_set_config(chip->base + offset, config);
>  	else if (param == PIN_CONFIG_DRIVE_OPEN_DRAIN ||
>  			param == PIN_CONFIG_DRIVE_OPEN_SOURCE)
>  		/* Return -ENOTSUPP to trigger emulation, as per datasheet */
Bartosz Golaszewski Oct. 5, 2023, 6:42 a.m. UTC | #3 
On Tue, Oct 3, 2023 at 9:39 AM Bartosz Golaszewski <brgl@bgdev.pl> wrote:
>
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
>
> pinctrl_gpio_set_config() expects the GPIO number from the global GPIO
> numberspace, not the controller-relative offset, which needs to be added
> to the chip base.
>
> Fixes: 5ae4cb94b313 ("gpio: aspeed: Add debounce support")
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> ---
>  drivers/gpio/gpio-aspeed.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c
> index da33bbbdacb9..58f107194fda 100644
> --- a/drivers/gpio/gpio-aspeed.c
> +++ b/drivers/gpio/gpio-aspeed.c
> @@ -973,7 +973,7 @@ static int aspeed_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
>         else if (param == PIN_CONFIG_BIAS_DISABLE ||
>                         param == PIN_CONFIG_BIAS_PULL_DOWN ||
>                         param == PIN_CONFIG_DRIVE_STRENGTH)
> -               return pinctrl_gpio_set_config(offset, config);
> +               return pinctrl_gpio_set_config(chip->base + offset, config);
>         else if (param == PIN_CONFIG_DRIVE_OPEN_DRAIN ||
>                         param == PIN_CONFIG_DRIVE_OPEN_SOURCE)
>                 /* Return -ENOTSUPP to trigger emulation, as per datasheet */
> --
> 2.39.2
>

Queued for fixes.

Bart
diff mbox series

Patch

diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c
index da33bbbdacb9..58f107194fda 100644
--- a/drivers/gpio/gpio-aspeed.c
+++ b/drivers/gpio/gpio-aspeed.c
@@ -973,7 +973,7 @@  static int aspeed_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
 	else if (param == PIN_CONFIG_BIAS_DISABLE ||
 			param == PIN_CONFIG_BIAS_PULL_DOWN ||
 			param == PIN_CONFIG_DRIVE_STRENGTH)
-		return pinctrl_gpio_set_config(offset, config);
+		return pinctrl_gpio_set_config(chip->base + offset, config);
 	else if (param == PIN_CONFIG_DRIVE_OPEN_DRAIN ||
 			param == PIN_CONFIG_DRIVE_OPEN_SOURCE)
 		/* Return -ENOTSUPP to trigger emulation, as per datasheet */