| Message ID | 20231019100901.4026680-1-andre.draszik@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2] tty: serial: samsung_tty: remove dead code | expand |
On Thu, Oct 19, 2023 at 5:09 AM André Draszik <andre.draszik@linaro.org> wrote: > > When support for various old platforms was removed in commit > 1ea35b355722 ("ARM: s3c: remove s3c24xx specific hacks"), > s3c24xx_serial_ops also became unused here because nothing sets port > type TYPE_S3C24XX anymore. > > Remove s3c24xx_serial_ops and all the code that's unreachable now. > > Fixes: 1ea35b355722 ("ARM: s3c: remove s3c24xx specific hacks") > Signed-off-by: André Draszik <andre.draszik@linaro.org> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> > v2: update commit message > --- > drivers/tty/serial/samsung_tty.c | 105 ------------------------------- > 1 file changed, 105 deletions(-) > > diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c > index 07fb8a9dac63..6b8d4b4402e9 100644 > --- a/drivers/tty/serial/samsung_tty.c > +++ b/drivers/tty/serial/samsung_tty.c > @@ -64,7 +64,6 @@ > #define RXSTAT_DUMMY_READ (0x10000000) > > enum s3c24xx_port_type { > - TYPE_S3C24XX, > TYPE_S3C6400, > TYPE_APPLE_S5L, > }; > @@ -128,8 +127,6 @@ struct s3c24xx_uart_dma { > }; > > struct s3c24xx_uart_port { > - unsigned char rx_claimed; > - unsigned char tx_claimed; > unsigned char rx_enabled; > unsigned char tx_enabled; > unsigned int pm_level; > @@ -1166,29 +1163,6 @@ static void s3c24xx_serial_release_dma(struct s3c24xx_uart_port *p) > } > } > > -static void s3c24xx_serial_shutdown(struct uart_port *port) > -{ > - struct s3c24xx_uart_port *ourport = to_ourport(port); > - > - if (ourport->tx_claimed) { > - free_irq(ourport->tx_irq, ourport); > - ourport->tx_enabled = 0; > - ourport->tx_claimed = 0; > - ourport->tx_mode = 0; > - } > - > - if (ourport->rx_claimed) { > - free_irq(ourport->rx_irq, ourport); > - ourport->rx_claimed = 0; > - ourport->rx_enabled = 0; > - } > - > - if (ourport->dma) > - s3c24xx_serial_release_dma(ourport); > - > - ourport->tx_in_progress = 0; > -} > - > static void s3c64xx_serial_shutdown(struct uart_port *port) > { > struct s3c24xx_uart_port *ourport = to_ourport(port); > @@ -1234,48 +1208,6 @@ static void apple_s5l_serial_shutdown(struct uart_port *port) > ourport->tx_in_progress = 0; > } > > -static int s3c24xx_serial_startup(struct uart_port *port) > -{ > - struct s3c24xx_uart_port *ourport = to_ourport(port); > - int ret; > - > - ourport->rx_enabled = 1; > - > - ret = request_irq(ourport->rx_irq, s3c24xx_serial_rx_irq, 0, > - s3c24xx_serial_portname(port), ourport); > - > - if (ret != 0) { > - dev_err(port->dev, "cannot get irq %d\n", ourport->rx_irq); > - return ret; > - } > - > - ourport->rx_claimed = 1; > - > - dev_dbg(port->dev, "requesting tx irq...\n"); > - > - ourport->tx_enabled = 1; > - > - ret = request_irq(ourport->tx_irq, s3c24xx_serial_tx_irq, 0, > - s3c24xx_serial_portname(port), ourport); > - > - if (ret) { > - dev_err(port->dev, "cannot get irq %d\n", ourport->tx_irq); > - goto err; > - } > - > - ourport->tx_claimed = 1; > - > - /* the port reset code should have done the correct > - * register setup for the port controls > - */ > - > - return ret; > - > -err: > - s3c24xx_serial_shutdown(port); > - return ret; > -} > - > static int s3c64xx_serial_startup(struct uart_port *port) > { > struct s3c24xx_uart_port *ourport = to_ourport(port); > @@ -1692,8 +1624,6 @@ static const char *s3c24xx_serial_type(struct uart_port *port) > const struct s3c24xx_uart_port *ourport = to_ourport(port); > > switch (ourport->info->type) { > - case TYPE_S3C24XX: > - return "S3C24XX"; > case TYPE_S3C6400: > return "S3C6400/10"; > case TYPE_APPLE_S5L: > @@ -1753,27 +1683,6 @@ static void s3c24xx_serial_put_poll_char(struct uart_port *port, > unsigned char c); > #endif > > -static const struct uart_ops s3c24xx_serial_ops = { > - .pm = s3c24xx_serial_pm, > - .tx_empty = s3c24xx_serial_tx_empty, > - .get_mctrl = s3c24xx_serial_get_mctrl, > - .set_mctrl = s3c24xx_serial_set_mctrl, > - .stop_tx = s3c24xx_serial_stop_tx, > - .start_tx = s3c24xx_serial_start_tx, > - .stop_rx = s3c24xx_serial_stop_rx, > - .break_ctl = s3c24xx_serial_break_ctl, > - .startup = s3c24xx_serial_startup, > - .shutdown = s3c24xx_serial_shutdown, > - .set_termios = s3c24xx_serial_set_termios, > - .type = s3c24xx_serial_type, > - .config_port = s3c24xx_serial_config_port, > - .verify_port = s3c24xx_serial_verify_port, > -#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL) > - .poll_get_char = s3c24xx_serial_get_poll_char, > - .poll_put_char = s3c24xx_serial_put_poll_char, > -#endif > -}; > - > static const struct uart_ops s3c64xx_serial_ops = { > .pm = s3c24xx_serial_pm, > .tx_empty = s3c24xx_serial_tx_empty, > @@ -1836,7 +1745,6 @@ static void s3c24xx_serial_init_port_default(int index) { > port->iotype = UPIO_MEM; > port->uartclk = 0; > port->fifosize = 16; > - port->ops = &s3c24xx_serial_ops; > port->flags = UPF_BOOT_AUTOCONF; > port->line = index; > } > @@ -1954,16 +1862,6 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, > ourport->tx_irq = ret + 1; > } > > - switch (ourport->info->type) { > - case TYPE_S3C24XX: > - ret = platform_get_irq(platdev, 1); > - if (ret > 0) > - ourport->tx_irq = ret; > - break; > - default: > - break; > - } > - > /* > * DMA is currently supported only on DT platforms, if DMA properties > * are specified. > @@ -2083,9 +1981,6 @@ static int s3c24xx_serial_probe(struct platform_device *pdev) > &ourport->drv_data->def_cfg; > > switch (ourport->info->type) { > - case TYPE_S3C24XX: > - ourport->port.ops = &s3c24xx_serial_ops; > - break; > case TYPE_S3C6400: > ourport->port.ops = &s3c64xx_serial_ops; > break; > -- > 2.40.1 >
Hi Andre, On Thu, Oct 19, 2023 at 11:09:01AM +0100, André Draszik wrote: > When support for various old platforms was removed in commit > 1ea35b355722 ("ARM: s3c: remove s3c24xx specific hacks"), > s3c24xx_serial_ops also became unused here because nothing sets port > type TYPE_S3C24XX anymore. > > Remove s3c24xx_serial_ops and all the code that's unreachable now. > > Fixes: 1ea35b355722 ("ARM: s3c: remove s3c24xx specific hacks") is this really a fix? Or is it a cleanup? Andi > Signed-off-by: André Draszik <andre.draszik@linaro.org> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Hi Andi, On Tue, 2023-10-24 at 23:55 +0200, Andi Shyti wrote: > Hi Andre, > > On Thu, Oct 19, 2023 at 11:09:01AM +0100, André Draszik wrote: > > When support for various old platforms was removed in commit > > 1ea35b355722 ("ARM: s3c: remove s3c24xx specific hacks"), > > s3c24xx_serial_ops also became unused here because nothing sets > > port > > type TYPE_S3C24XX anymore. > > > > Remove s3c24xx_serial_ops and all the code that's unreachable now. > > > > Fixes: 1ea35b355722 ("ARM: s3c: remove s3c24xx specific hacks") > > is this really a fix? Or is it a cleanup? I guess from my position it's fixing the issue of dead code, introduced in the commit referenced. Which is of course also a cleanup :-) Not sure... Cheers, Andre
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c index 07fb8a9dac63..6b8d4b4402e9 100644 --- a/drivers/tty/serial/samsung_tty.c +++ b/drivers/tty/serial/samsung_tty.c @@ -64,7 +64,6 @@ #define RXSTAT_DUMMY_READ (0x10000000) enum s3c24xx_port_type { - TYPE_S3C24XX, TYPE_S3C6400, TYPE_APPLE_S5L, }; @@ -128,8 +127,6 @@ struct s3c24xx_uart_dma { }; struct s3c24xx_uart_port { - unsigned char rx_claimed; - unsigned char tx_claimed; unsigned char rx_enabled; unsigned char tx_enabled; unsigned int pm_level; @@ -1166,29 +1163,6 @@ static void s3c24xx_serial_release_dma(struct s3c24xx_uart_port *p) } } -static void s3c24xx_serial_shutdown(struct uart_port *port) -{ - struct s3c24xx_uart_port *ourport = to_ourport(port); - - if (ourport->tx_claimed) { - free_irq(ourport->tx_irq, ourport); - ourport->tx_enabled = 0; - ourport->tx_claimed = 0; - ourport->tx_mode = 0; - } - - if (ourport->rx_claimed) { - free_irq(ourport->rx_irq, ourport); - ourport->rx_claimed = 0; - ourport->rx_enabled = 0; - } - - if (ourport->dma) - s3c24xx_serial_release_dma(ourport); - - ourport->tx_in_progress = 0; -} - static void s3c64xx_serial_shutdown(struct uart_port *port) { struct s3c24xx_uart_port *ourport = to_ourport(port); @@ -1234,48 +1208,6 @@ static void apple_s5l_serial_shutdown(struct uart_port *port) ourport->tx_in_progress = 0; } -static int s3c24xx_serial_startup(struct uart_port *port) -{ - struct s3c24xx_uart_port *ourport = to_ourport(port); - int ret; - - ourport->rx_enabled = 1; - - ret = request_irq(ourport->rx_irq, s3c24xx_serial_rx_irq, 0, - s3c24xx_serial_portname(port), ourport); - - if (ret != 0) { - dev_err(port->dev, "cannot get irq %d\n", ourport->rx_irq); - return ret; - } - - ourport->rx_claimed = 1; - - dev_dbg(port->dev, "requesting tx irq...\n"); - - ourport->tx_enabled = 1; - - ret = request_irq(ourport->tx_irq, s3c24xx_serial_tx_irq, 0, - s3c24xx_serial_portname(port), ourport); - - if (ret) { - dev_err(port->dev, "cannot get irq %d\n", ourport->tx_irq); - goto err; - } - - ourport->tx_claimed = 1; - - /* the port reset code should have done the correct - * register setup for the port controls - */ - - return ret; - -err: - s3c24xx_serial_shutdown(port); - return ret; -} - static int s3c64xx_serial_startup(struct uart_port *port) { struct s3c24xx_uart_port *ourport = to_ourport(port); @@ -1692,8 +1624,6 @@ static const char *s3c24xx_serial_type(struct uart_port *port) const struct s3c24xx_uart_port *ourport = to_ourport(port); switch (ourport->info->type) { - case TYPE_S3C24XX: - return "S3C24XX"; case TYPE_S3C6400: return "S3C6400/10"; case TYPE_APPLE_S5L: @@ -1753,27 +1683,6 @@ static void s3c24xx_serial_put_poll_char(struct uart_port *port, unsigned char c); #endif -static const struct uart_ops s3c24xx_serial_ops = { - .pm = s3c24xx_serial_pm, - .tx_empty = s3c24xx_serial_tx_empty, - .get_mctrl = s3c24xx_serial_get_mctrl, - .set_mctrl = s3c24xx_serial_set_mctrl, - .stop_tx = s3c24xx_serial_stop_tx, - .start_tx = s3c24xx_serial_start_tx, - .stop_rx = s3c24xx_serial_stop_rx, - .break_ctl = s3c24xx_serial_break_ctl, - .startup = s3c24xx_serial_startup, - .shutdown = s3c24xx_serial_shutdown, - .set_termios = s3c24xx_serial_set_termios, - .type = s3c24xx_serial_type, - .config_port = s3c24xx_serial_config_port, - .verify_port = s3c24xx_serial_verify_port, -#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL) - .poll_get_char = s3c24xx_serial_get_poll_char, - .poll_put_char = s3c24xx_serial_put_poll_char, -#endif -}; - static const struct uart_ops s3c64xx_serial_ops = { .pm = s3c24xx_serial_pm, .tx_empty = s3c24xx_serial_tx_empty, @@ -1836,7 +1745,6 @@ static void s3c24xx_serial_init_port_default(int index) { port->iotype = UPIO_MEM; port->uartclk = 0; port->fifosize = 16; - port->ops = &s3c24xx_serial_ops; port->flags = UPF_BOOT_AUTOCONF; port->line = index; } @@ -1954,16 +1862,6 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, ourport->tx_irq = ret + 1; } - switch (ourport->info->type) { - case TYPE_S3C24XX: - ret = platform_get_irq(platdev, 1); - if (ret > 0) - ourport->tx_irq = ret; - break; - default: - break; - } - /* * DMA is currently supported only on DT platforms, if DMA properties * are specified. @@ -2083,9 +1981,6 @@ static int s3c24xx_serial_probe(struct platform_device *pdev) &ourport->drv_data->def_cfg; switch (ourport->info->type) { - case TYPE_S3C24XX: - ourport->port.ops = &s3c24xx_serial_ops; - break; case TYPE_S3C6400: ourport->port.ops = &s3c64xx_serial_ops; break;
When support for various old platforms was removed in commit 1ea35b355722 ("ARM: s3c: remove s3c24xx specific hacks"), s3c24xx_serial_ops also became unused here because nothing sets port type TYPE_S3C24XX anymore. Remove s3c24xx_serial_ops and all the code that's unreachable now. Fixes: 1ea35b355722 ("ARM: s3c: remove s3c24xx specific hacks") Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- v2: update commit message --- drivers/tty/serial/samsung_tty.c | 105 ------------------------------- 1 file changed, 105 deletions(-)