From patchwork Tue Oct 24 09:24:58 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 13434124 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 69083C25B47 for ; Tue, 24 Oct 2023 09:26:25 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:Cc:To:In-Reply-To:References:Message-Id :MIME-Version:Subject:Date:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=hUQl5doUcrOiVLUyE2qOszCohcIGSivYrlaiUoWd2/c=; b=vKf1oIYuOkGFr4 5G+H3L9mdaZwCdU5cy9EknAJ/Tp/zyTs81CwxF/15scGJ5mQh5gAT8NshrcAlwrTouYrJ3jTjYPFR pEupRLvIzZC+mOOywrbmJKEnmZxLy3a+Bda2QhtVWNK7Yu/SGL0clHWy1hU7wQraPZqQqEJydjrSG W1IBG9YCo1QJtxYCeH7bOtn9a3tcDzuYZfjQJnXGUiDIShQgRUQ3lTeAkel5xdflDjN/Ahg8oXeN7 ZTe4l2d5iqmC6Na3kPhy/Mv3patqvzMVYwbQl6t1lO++Vp8t4eLFTEAnqjRrguw1XbgrG38zooX1s xSstao+iw/WjtGHnACFQ==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.96 #2 (Red Hat Linux)) id 1qvDfi-009J1A-0w; Tue, 24 Oct 2023 09:25:58 +0000 Received: from mail-lj1-x22f.google.com ([2a00:1450:4864:20::22f]) by bombadil.infradead.org with esmtps (Exim 4.96 #2 (Red Hat Linux)) id 1qvDfB-009Igt-1y for linux-arm-kernel@lists.infradead.org; Tue, 24 Oct 2023 09:25:28 +0000 Received: by mail-lj1-x22f.google.com with SMTP id 38308e7fff4ca-2c504a5e1deso67121561fa.2 for ; Tue, 24 Oct 2023 02:25:20 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1698139519; x=1698744319; darn=lists.infradead.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=2hapr2uWvv+4H11PFrbXw7XKmhdz7N96RSJjEZL4j0Q=; b=q075BqK8h2aDSLJ2/ii3Ib4+jIr3p9kKjKIaB6Sgx669DoFqdEFlc5vZkkuzlyDvjQ HPrb6oTvyds/iDIk3wKONqrIOd62EIkDhYzpo75HLEX7m4Qa8vJrjTbixqRBs1/2xyo1 yvYb9xidTSB+AIceJfWAVXsdql20c4EB/UejaGQFqxpP4HIO7cxYGVmHkmqupfTD22fQ MacNckzyqQf/AC9TbLb8IlCElLC1rJrO7qCPUGij6S8rEXQlk6PIKIRW/O+6Ujk313je sq6F84vyT5cRSwOKWJ8Sm51FgDA34OGW2gTcAvXIydgXaVEy6rCmTUt2Qzw9aqJ08ZkM yLqA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1698139519; x=1698744319; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=2hapr2uWvv+4H11PFrbXw7XKmhdz7N96RSJjEZL4j0Q=; b=UxPAOuZ4Tdw/aOyOj3/maz/dc9Q4Mh1eygpH22RJFsqpHlUdjCujQppsUoZB2JG9X7 zb1Y6ceVeEyqzQaOTkJrP1OwCkF9u3sGr6W694e379KgE1k+NB6QM49MEIA+1LEQMucV bgQ7MT+eQfdLMnq18cN4Kw36Uqm+Leio5jpeJ4gYHi9P+GDGzYGdWxVYfH/aU89cj1Rn 9WdMTDyKN3e2XgryJ7eKkFXIGRm5DfMVtCzlSToDj5rlNRo8vqbsGwz83DM47x9fVzSc 5Ohkwb6bAd3bP8vtk0R3MzMcl4G+uqTCsB2I3rUy/ufBXZlp36OtzO88pyT32MNI2rFE UGaQ== X-Gm-Message-State: AOJu0YxoajgHEbkvVHlIaPDoZmsh1sPF6ZpIiVT3Zwp0fPZ159hoJjnk 92HpwtKG0YsaC35TOi75Bt9Uwg== X-Google-Smtp-Source: AGHT+IHIFk6K8fKmbg9tGZ5pgjsk3Ea02yuefZuZncWXvUyaKAJDP/vDLy6+EGuC57yJ/XYupqJJvQ== X-Received: by 2002:a19:7411:0:b0:502:a4f4:ced9 with SMTP id v17-20020a197411000000b00502a4f4ced9mr8077775lfe.62.1698139519559; Tue, 24 Oct 2023 02:25:19 -0700 (PDT) Received: from [127.0.1.1] ([85.235.12.238]) by smtp.gmail.com with ESMTPSA id c12-20020ac25f6c000000b004fbc82dd1a5sm2060246lfc.13.2023.10.24.02.25.18 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 24 Oct 2023 02:25:19 -0700 (PDT) From: Linus Walleij Date: Tue, 24 Oct 2023 11:24:58 +0200 Subject: [PATCH net-next v6 6/7] dt-bindings: marvell: Rewrite MV88E6xxx in schema MIME-Version: 1.0 Message-Id: <20231024-marvell-88e6152-wan-led-v6-6-993ab0949344@linaro.org> References: <20231024-marvell-88e6152-wan-led-v6-0-993ab0949344@linaro.org> In-Reply-To: <20231024-marvell-88e6152-wan-led-v6-0-993ab0949344@linaro.org> To: Andrew Lunn , Gregory Clement , Sebastian Hesselbarth , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Russell King , Florian Fainelli , Vladimir Oltean , "David S. Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , =?utf-8?q?Marek_Beh=C3=BAn?= Cc: Christian Marangi , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, Linus Walleij , Rob Herring X-Mailer: b4 0.12.4 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20231024_022525_660874_24BB3130 X-CRM114-Status: GOOD ( 24.38 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org This is an attempt to rewrite the Marvell MV88E6xxx switch bindings in YAML schema. The current text binding says: WARNING: This binding is currently unstable. Do not program it into a FLASH never to be changed again. Once this binding is stable, this warning will be removed. Well that never happened before we switched to YAML markup, we can't have it like this, what about fixing the mess? Reviewed-by: Andrew Lunn Reviewed-by: Rob Herring Signed-off-by: Linus Walleij --- .../bindings/net/dsa/marvell,mv88e6xxx.yaml | 330 +++++++++++++++++++++ .../devicetree/bindings/net/dsa/marvell.txt | 109 ------- MAINTAINERS | 2 +- 3 files changed, 331 insertions(+), 110 deletions(-) diff --git a/Documentation/devicetree/bindings/net/dsa/marvell,mv88e6xxx.yaml b/Documentation/devicetree/bindings/net/dsa/marvell,mv88e6xxx.yaml new file mode 100644 index 000000000000..34d8561a2187 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/marvell,mv88e6xxx.yaml @@ -0,0 +1,330 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MV88E6xxx DSA switch family + +maintainers: + - Andrew Lunn + +description: + The Marvell MV88E6xxx switch series has been produced and sold + by Marvell since at least 2008. The switch has a few compatibles which + just indicate the base address of the switch, then operating systems + can investigate switch ID registers to find out which actual version + of the switch it is dealing with. + +properties: + compatible: + enum: + - marvell,mv88e6085 + - marvell,mv88e6190 + - marvell,mv88e6250 + description: | + marvell,mv88e6085: This switch uses base address 0x10. + This switch and its siblings will be autodetected from + ID registers found in the switch, so only "marvell,mv88e6085" should be + specified. This includes the following list of MV88Exxxx switches: + 6085, 6095, 6097, 6123, 6131, 6141, 6161, 6165, 6171, 6172, 6175, 6176, + 6185, 6240, 6320, 6321, 6341, 6350, 6351, 6352 + marvell,mv88e6190: This switch uses base address 0x00. + This switch and its siblings will be autodetected from + ID registers found in the switch, so only "marvell,mv88e6190" should be + specified. This includes the following list of MV88Exxxx switches: + 6190, 6190X, 6191, 6290, 6361, 6390, 6390X + marvell,mv88e6250: This switch uses base address 0x08 or 0x18. + This switch and its siblings will be autodetected from + ID registers found in the switch, so only "marvell,mv88e6250" should be + specified. This includes the following list of MV88Exxxx switches: + 6220, 6250 + + reg: + maxItems: 1 + + eeprom-length: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Set to the length of an EEPROM connected to the switch. Must be + set if the switch can not detect the presence and/or size of a connected + EEPROM, otherwise optional. + + reset-gpios: + description: + GPIO to be used to reset the whole device + maxItems: 1 + + interrupts: + description: The switch provides an external interrupt line, but it is + not always used by target systems. + maxItems: 1 + + interrupt-controller: + description: The switch has an internal interrupt controller used by + the different sub-blocks. + + '#interrupt-cells': + description: The internal interrupt controller only supports triggering + on active high level interrupts so the second cell must alway be set to + IRQ_TYPE_LEVEL_HIGH. + const: 2 + + mdio: + $ref: /schemas/net/mdio.yaml# + unevaluatedProperties: false + description: Marvell MV88E6xxx switches have an varying combination of + internal and external MDIO buses, in some cases a combined bus that + can be used both internally and externally. This node is for the + primary bus, used internally and sometimes also externally. + + mdio-external: + $ref: /schemas/net/mdio.yaml# + unevaluatedProperties: false + description: Marvell MV88E6xxx switches that have a separate external + MDIO bus use this port to access external components on the MDIO bus. + + properties: + compatible: + const: marvell,mv88e6xxx-mdio-external + + required: + - compatible + +allOf: + - $ref: dsa.yaml#/$defs/ethernet-ports + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-switch@0 { + compatible = "marvell,mv88e6085"; + reg = <0>; + reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + sw_phy0: ethernet-phy@0 { + reg = <0x0>; + }; + + sw_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + sw_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + sw_phy3: ethernet-phy@3 { + reg = <0x3>; + }; + }; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-port@0 { + reg = <0>; + label = "lan4"; + phy-handle = <&sw_phy0>; + phy-mode = "internal"; + }; + + ethernet-port@1 { + reg = <1>; + label = "lan3"; + phy-handle = <&sw_phy1>; + phy-mode = "internal"; + }; + + ethernet-port@2 { + reg = <2>; + label = "lan2"; + phy-handle = <&sw_phy2>; + phy-mode = "internal"; + }; + + ethernet-port@3 { + reg = <3>; + label = "lan1"; + phy-handle = <&sw_phy3>; + phy-mode = "internal"; + }; + + ethernet-port@5 { + reg = <5>; + ethernet = <&fec>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; + - | + #include + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-switch@0 { + compatible = "marvell,mv88e6190"; + #interrupt-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&switch_interrupt_pins>; + pinctrl-names = "default"; + reg = <0>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + switch0phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + switch0phy3: ethernet-phy@3 { + reg = <0x3>; + }; + + switch0phy4: ethernet-phy@4 { + reg = <0x4>; + }; + + switch0phy5: ethernet-phy@5 { + reg = <0x5>; + }; + + switch0phy6: ethernet-phy@6 { + reg = <0x6>; + }; + + switch0phy7: ethernet-phy@7 { + reg = <0x7>; + }; + + switch0phy8: ethernet-phy@8 { + reg = <0x8>; + }; + }; + + mdio-external { + compatible = "marvell,mv88e6xxx-mdio-external"; + #address-cells = <1>; + #size-cells = <0>; + + phy1: ethernet-phy@b { + reg = <0xb>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + + phy2: ethernet-phy@c { + reg = <0xc>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + }; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-port@0 { + ethernet = <ð0>; + phy-mode = "rgmii"; + reg = <0>; + + fixed-link { + full-duplex; + pause; + speed = <1000>; + }; + }; + + ethernet-port@1 { + label = "lan1"; + phy-handle = <&switch0phy1>; + reg = <1>; + }; + + ethernet-port@2 { + label = "lan2"; + phy-handle = <&switch0phy2>; + reg = <2>; + }; + + ethernet-port@3 { + label = "lan3"; + phy-handle = <&switch0phy3>; + reg = <3>; + }; + + ethernet-port@4 { + label = "lan4"; + phy-handle = <&switch0phy4>; + reg = <4>; + }; + + ethernet-port@5 { + label = "lan5"; + phy-handle = <&switch0phy5>; + reg = <5>; + }; + + ethernet-port@6 { + label = "lan6"; + phy-handle = <&switch0phy6>; + reg = <6>; + }; + + ethernet-port@7 { + label = "lan7"; + phy-handle = <&switch0phy7>; + reg = <7>; + }; + + ethernet-port@8 { + label = "lan8"; + phy-handle = <&switch0phy8>; + reg = <8>; + }; + + ethernet-port@9 { + /* 88X3310P external phy */ + label = "lan9"; + phy-handle = <&phy1>; + phy-mode = "xaui"; + reg = <9>; + }; + + ethernet-port@a { + /* 88X3310P external phy */ + label = "lan10"; + phy-handle = <&phy2>; + phy-mode = "xaui"; + reg = <0xa>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt deleted file mode 100644 index 6ec0c181b6db..000000000000 --- a/Documentation/devicetree/bindings/net/dsa/marvell.txt +++ /dev/null @@ -1,109 +0,0 @@ -Marvell DSA Switch Device Tree Bindings ---------------------------------------- - -WARNING: This binding is currently unstable. Do not program it into a -FLASH never to be changed again. Once this binding is stable, this -warning will be removed. - -If you need a stable binding, use the old dsa.txt binding. - -Marvell Switches are MDIO devices. The following properties should be -placed as a child node of an mdio device. - -The properties described here are those specific to Marvell devices. -Additional required and optional properties can be found in dsa.txt. - -The compatibility string is used only to find an identification register, -which is at a different MDIO base address in different switch families. -- "marvell,mv88e6085" : Switch has base address 0x10. Use with models: - 6085, 6095, 6097, 6123, 6131, 6141, 6161, 6165, - 6171, 6172, 6175, 6176, 6185, 6240, 6320, 6321, - 6341, 6350, 6351, 6352 -- "marvell,mv88e6190" : Switch has base address 0x00. Use with models: - 6190, 6190X, 6191, 6290, 6361, 6390, 6390X -- "marvell,mv88e6250" : Switch has base address 0x08 or 0x18. Use with model: - 6220, 6250 - -Required properties: -- compatible : Should be one of "marvell,mv88e6085", - "marvell,mv88e6190" or "marvell,mv88e6250" as - indicated above -- reg : Address on the MII bus for the switch. - -Optional properties: - -- reset-gpios : Should be a gpio specifier for a reset line -- interrupts : Interrupt from the switch -- interrupt-controller : Indicates the switch is itself an interrupt - controller. This is used for the PHY interrupts. -#interrupt-cells = <2> : Controller uses two cells, number and flag -- eeprom-length : Set to the length of an EEPROM connected to the - switch. Must be set if the switch can not detect - the presence and/or size of a connected EEPROM, - otherwise optional. -- mdio : Container of PHY and devices on the switches MDIO - bus. -- mdio? : Container of PHYs and devices on the external MDIO - bus. The node must contains a compatible string of - "marvell,mv88e6xxx-mdio-external" - -Example: - - mdio { - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&gpio0>; - interrupts = <27 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <2>; - - switch0: switch@0 { - compatible = "marvell,mv88e6085"; - reg = <0>; - reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - switch1phy0: switch1phy0@0 { - reg = <0>; - interrupt-parent = <&switch0>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&gpio0>; - interrupts = <27 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <2>; - - switch0: switch@0 { - compatible = "marvell,mv88e6190"; - reg = <0>; - reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - switch1phy0: switch1phy0@0 { - reg = <0>; - interrupt-parent = <&switch0>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - mdio1 { - compatible = "marvell,mv88e6xxx-mdio-external"; - #address-cells = <1>; - #size-cells = <0>; - switch1phy9: switch1phy0@9 { - reg = <9>; - }; - }; - }; - }; diff --git a/MAINTAINERS b/MAINTAINERS index 90f13281d297..1b4475254d27 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12625,7 +12625,7 @@ MARVELL 88E6XXX ETHERNET SWITCH FABRIC DRIVER M: Andrew Lunn L: netdev@vger.kernel.org S: Maintained -F: Documentation/devicetree/bindings/net/dsa/marvell.txt +F: Documentation/devicetree/bindings/net/dsa/marvell,mv88e6xxx.yaml F: Documentation/networking/devlink/mv88e6xxx.rst F: drivers/net/dsa/mv88e6xxx/ F: include/linux/dsa/mv88e6xxx.h