| Message ID | 20231102061233.3113249-1-adeep@lexina.in (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: meson-axg: jethub-jxx add support for EEPROM | expand |
On 02/11/2023 07:12, Viacheslav Bocharov wrote: > Add dts node for EEPROM placed on baseboard in JetHub D1+ devices. > > Signed-off-by: Viacheslav Bocharov <adeep@lexina.in> > --- > .../amlogic/meson-axg-jethome-jethub-j110-rev-2.dts | 12 ++++++++++++ > .../amlogic/meson-axg-jethome-jethub-j110-rev-3.dts | 12 ++++++++++++ > 2 files changed, 24 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts > index 0062667c4f65..2c684f0ca99a 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts > @@ -35,3 +35,15 @@ bluetooth { > device-wake-gpios = <&gpio GPIOZ_6 GPIO_ACTIVE_HIGH>; > }; > }; > + > +&i2c_AO { > + /* EEPROM on base board */ > + eeprompd: eeprom@56 { > + compatible = "atmel,24c64"; > + reg = <0x56>; > + pagesize = <0x20>; > + label = "eeprompd"; > + address-width = <0x10>; > + vcc-supply = <&vddao_3v3>; > + }; > +}; > diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts > index c2d22b00c1cd..c356bd2cc63a 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts > @@ -25,3 +25,15 @@ memory@0 { > &sd_emmc_b { > broken-cd;/* cd-gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;*/ > }; > + > +&i2c_AO { > + /* EEPROM on base board */ > + eeprompd: eeprom@56 { > + compatible = "atmel,24c64"; > + reg = <0x56>; > + pagesize = <0x20>; > + label = "eeprompd"; > + address-width = <0x10>; > + vcc-supply = <&vddao_3v3>; > + }; > +}; Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Hi, On Thu, 02 Nov 2023 09:12:33 +0300, Viacheslav Bocharov wrote: > Add dts node for EEPROM placed on baseboard in JetHub D1+ devices. > > Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v6.8/arm64-dt) [1/1] arm64: dts: meson-axg: jethub-jxx add support for EEPROM https://git.kernel.org/amlogic/c/bee505184fd5543b9e901a37523e39fd1db06860 These changes has been applied on the intermediate git tree [1]. The v6.8/arm64-dt branch will then be sent via a formal Pull Request to the Linux SoC maintainers for inclusion in their intermediate git branches in order to be sent to Linus during the next merge window, or sooner if it's a set of fixes. In the cases of fixes, those will be merged in the current release candidate kernel and as soon they appear on the Linux master branch they will be backported to the previous Stable and Long-Stable kernels [2]. The intermediate git branches are merged daily in the linux-next tree [3], people are encouraged testing these pre-release kernels and report issues on the relevant mailing-lists. If problems are discovered on those changes, please submit a signed-off-by revert patch followed by a corrective changeset. [1] https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git [3] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts index 0062667c4f65..2c684f0ca99a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts @@ -35,3 +35,15 @@ bluetooth { device-wake-gpios = <&gpio GPIOZ_6 GPIO_ACTIVE_HIGH>; }; }; + +&i2c_AO { + /* EEPROM on base board */ + eeprompd: eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + pagesize = <0x20>; + label = "eeprompd"; + address-width = <0x10>; + vcc-supply = <&vddao_3v3>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts index c2d22b00c1cd..c356bd2cc63a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts @@ -25,3 +25,15 @@ memory@0 { &sd_emmc_b { broken-cd;/* cd-gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;*/ }; + +&i2c_AO { + /* EEPROM on base board */ + eeprompd: eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + pagesize = <0x20>; + label = "eeprompd"; + address-width = <0x10>; + vcc-supply = <&vddao_3v3>; + }; +};
Add dts node for EEPROM placed on baseboard in JetHub D1+ devices. Signed-off-by: Viacheslav Bocharov <adeep@lexina.in> --- .../amlogic/meson-axg-jethome-jethub-j110-rev-2.dts | 12 ++++++++++++ .../amlogic/meson-axg-jethome-jethub-j110-rev-3.dts | 12 ++++++++++++ 2 files changed, 24 insertions(+)