diff mbox series

[2/2] ARM: dts: bcm2711-rpi-400: Fix delete-node of led_act

Message ID 20231105154940.97688-3-wahrenst@gmx.net (mailing list archive)
State New, archived
Headers show
Series ARM: dts: bcm2711-rpi-400: Fix delete-node of led_act | expand

Commit Message

Stefan Wahren Nov. 5, 2023, 3:49 p.m. UTC 
The LED ACT which is included from bcm2711-rpi-4-b doesn't exists
on the Raspberry Pi 400. So the bcm2711-rpi-400.dts tries to
use the delete-node directive in order to remove the complete
node. Unfortunately the usage get broken in commit 1156e3a78bcc
("ARM: dts: bcm283x: Move ACT LED into separate dtsi")
and now ACT and PWR LED using the same GPIO and this prevent
probing of led-gpios on Raspberry Pi 400:

    leds-gpio: probe of leds failed with error -16

So fix the delete-node directive.

Fixes: 1156e3a78bcc ("ARM: dts: bcm283x: Move ACT LED into separate dtsi")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
---
 arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--
2.34.1
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts
index 1ab8184302db..5a2869a18bd5 100644
--- a/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts
@@ -36,9 +36,7 @@  &led_pwr {
 	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
 };

-&leds {
-	/delete-node/ led_act;
-};
+/delete-node/ &led_act;

 &pm {
 	/delete-property/ system-power-controller;