diff mbox series

[net-next,v2,8/8] ARM: dts: qcom: ipq4019: Add description for the IPQ4019 ESS EDMA and switch

Message ID 20231114090743.865453-9-romain.gantois@bootlin.com (mailing list archive)
State New, archived
Headers show
Series net: qualcomm: ipqess: introduce Qualcomm IPQESS driver | expand

Commit Message

Romain Gantois Nov. 14, 2023, 9:07 a.m. UTC 
The Qualcomm IPQ4019 includes a modified version of the QCA8K Ethernet
switch. The switch's CPU port is connected to the SoC through the internal
EDMA Ethernet controller. Add support for these two devices, which are
coupled tightly enough to justify treating them as a single device.

Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
---
 .../boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi | 13 +++
 arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi      | 94 +++++++++++++++++++
 2 files changed, 107 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi
index da67d55fa557..6a185b8b31c6 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi
@@ -242,6 +242,19 @@  &mdio {
 	pinctrl-names = "default";
 };
 
+&switch {
+	status = "okay";
+};
+
+&swport4 {
+	status = "okay";
+	label = "lan";
+};
+
+&swport5 {
+	status = "okay";
+};
+
 &wifi0 {
 	status = "okay";
 	nvmem-cell-names = "pre-calibration";
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
index 9844e0b7cff9..5a4e5d408f72 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
@@ -596,6 +596,100 @@  wifi1: wifi@a800000 {
 			status = "disabled";
 		};
 
+		switch: switch@c000000 {
+			compatible = "qcom,ipq4019-ess";
+			reg = <0xc000000 0x80000>, <0x98000 0x800>, <0xc080000 0x8000>;
+			reg-names = "base", "psgmii_phy", "edma";
+			resets = <&gcc ESS_PSGMII_ARES>, <&gcc ESS_RESET>;
+			reset-names = "psgmii", "ess";
+			clocks = <&gcc GCC_ESS_CLK>;
+			clock-names = "ess";
+			mdio = <&mdio>;
+			interrupts = <GIC_SPI  65 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI  66 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI  67 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI  68 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI  69 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI  70 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI  71 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI  72 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI  73 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI  74 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI  75 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI  76 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI  77 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI  78 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI  79 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI  80 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 240 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 242 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 243 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 244 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 245 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 246 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 248 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 249 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 251 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 252 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 253 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 254 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 255 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				swport1: port@1 { /* MAC1 */
+					reg = <1>;
+					label = "lan1";
+					phy-handle = <&ethphy0>;
+					phy-mode = "psgmii";
+
+					status = "disabled";
+				};
+
+				swport2: port@2 { /* MAC2 */
+					reg = <2>;
+					label = "lan2";
+					phy-handle = <&ethphy1>;
+					phy-mode = "psgmii";
+
+					status = "disabled";
+				};
+
+				swport3: port@3 { /* MAC3 */
+					reg = <3>;
+					label = "lan3";
+					phy-handle = <&ethphy2>;
+					phy-mode = "psgmii";
+
+					status = "disabled";
+				};
+
+				swport4: port@4 { /* MAC4 */
+					reg = <4>;
+					label = "lan4";
+					phy-handle = <&ethphy3>;
+					phy-mode = "psgmii";
+
+					status = "disabled";
+				};
+
+				swport5: port@5 { /* MAC5 */
+					reg = <5>;
+					label = "wan";
+					phy-handle = <&ethphy4>;
+					phy-mode = "psgmii";
+
+					status = "disabled";
+				};
+			};
+		};
+
 		mdio: mdio@90000 {
 			#address-cells = <1>;
 			#size-cells = <0>;