diff mbox series

[v2,2/2] arm64: dts: ti: k3-j721s2-evm: Add overlay for PCIE1 Endpoint Mode

Message ID 20231115085204.3578616-3-s-vadapalli@ti.com (mailing list archive)
State New, archived
Headers show
Series Add PCIe Endpoint overlays for J721E and J721S2 | expand

Commit Message

Siddharth Vadapalli Nov. 15, 2023, 8:52 a.m. UTC 
Add overlay to enable the PCIE1 instance of PCIe on J721S2-EVM in
Endpoint mode of operation.

Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
---
 arch/arm64/boot/dts/ti/Makefile               |  3 ++
 .../boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso   | 53 +++++++++++++++++++
 2 files changed, 56 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso

Comments

Ravi Gunasekaran Dec. 1, 2023, 5:04 a.m. UTC | #1 
On 11/15/23 2:22 PM, Siddharth Vadapalli wrote:
> Add overlay to enable the PCIE1 instance of PCIe on J721S2-EVM in
> Endpoint mode of operation.
> 
> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
> ---
>  arch/arm64/boot/dts/ti/Makefile               |  3 ++
>  .../boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso   | 53 +++++++++++++++++++
>  2 files changed, 56 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso
> 
> diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
> index 5620db44d4dc..70baf88964fb 100644
> --- a/arch/arm64/boot/dts/ti/Makefile
> +++ b/arch/arm64/boot/dts/ti/Makefile
> @@ -77,6 +77,8 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721s2-common-proc-board.dtb
>  dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-gesi-exp-board.dtbo
>  k3-j721s2-evm-dtbs := k3-j721s2-common-proc-board.dtb k3-j721s2-evm-gesi-exp-board.dtbo
>  dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm.dtb
> +k3-j721s2-evm-pcie1-ep-dtbs := k3-j721s2-evm.dtb k3-j721s2-evm-pcie1-ep.dtbo
> +dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-pcie1-ep.dtb
>  
>  # Boards with J784s4 SoC
>  dtb-$(CONFIG_ARCH_K3) += k3-am69-sk.dtb
> @@ -89,3 +91,4 @@ DTC_FLAGS_k3-am6548-iot2050-advanced-m2 += -@
>  DTC_FLAGS_k3-j721e-common-proc-board += -@
>  DTC_FLAGS_k3-j721e-evm += -@
>  DTC_FLAGS_k3-j721s2-common-proc-board += -@
> +DTC_FLAGS_k3-j721s2-evm += -@
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso b/arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso
> new file mode 100644
> index 000000000000..43568eb67d93
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso
> @@ -0,0 +1,53 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/**
> + * DT Overlay for enabling PCIE1 instance in Endpoint Configuration with the
> + * J7 common processor board.
> + *
> + * J7 Common Processor Board Product Link: https://www.ti.com/tool/J721EXCPXEVM
> + *
> + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/soc/ti,sci_pm_domain.h>
> +
> +#include "k3-pinctrl.h"
> +
> +/*
> + * Since Root Complex and Endpoint modes are mutually exclusive
> + * disable Root Complex mode.
> + */
> +&pcie1_rc {
> +	status = "disabled";
> +};
> +
> +&cbass_main {
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +	interrupt-parent = <&gic500>;
> +
> +	pcie1_ep: pcie-ep@2910000 {
> +		compatible = "ti,j7200-pcie-ep", "ti,j721e-pcie-ep";
> +		reg = <0x00 0x02910000 0x00 0x1000>,
> +		      <0x00 0x02917000 0x00 0x400>,
> +		      <0x00 0x0d800000 0x00 0x00800000>,
> +		      <0x00 0x18000000 0x00 0x08000000>;
> +		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
> +		interrupt-names = "link_state";
> +		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
> +		ti,syscon-pcie-ctrl = <&scm_conf 0x074>;
> +		max-link-speed = <3>;
> +		num-lanes = <1>;
> +		power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
> +		clocks = <&k3_clks 276 41>;
> +		clock-names = "fck";
> +		max-functions = /bits/ 8 <6>;
> +		max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
> +		dma-coherent;
> +		phys = <&serdes0_pcie_link>;
> +		phy-names = "pcie-phy";
> +	};
> +};


Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 5620db44d4dc..70baf88964fb 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -77,6 +77,8 @@  dtb-$(CONFIG_ARCH_K3) += k3-j721s2-common-proc-board.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-gesi-exp-board.dtbo
 k3-j721s2-evm-dtbs := k3-j721s2-common-proc-board.dtb k3-j721s2-evm-gesi-exp-board.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm.dtb
+k3-j721s2-evm-pcie1-ep-dtbs := k3-j721s2-evm.dtb k3-j721s2-evm-pcie1-ep.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-pcie1-ep.dtb
 
 # Boards with J784s4 SoC
 dtb-$(CONFIG_ARCH_K3) += k3-am69-sk.dtb
@@ -89,3 +91,4 @@  DTC_FLAGS_k3-am6548-iot2050-advanced-m2 += -@
 DTC_FLAGS_k3-j721e-common-proc-board += -@
 DTC_FLAGS_k3-j721e-evm += -@
 DTC_FLAGS_k3-j721s2-common-proc-board += -@
+DTC_FLAGS_k3-j721s2-evm += -@
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso b/arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso
new file mode 100644
index 000000000000..43568eb67d93
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso
@@ -0,0 +1,53 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * DT Overlay for enabling PCIE1 instance in Endpoint Configuration with the
+ * J7 common processor board.
+ *
+ * J7 Common Processor Board Product Link: https://www.ti.com/tool/J721EXCPXEVM
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/*
+ * Since Root Complex and Endpoint modes are mutually exclusive
+ * disable Root Complex mode.
+ */
+&pcie1_rc {
+	status = "disabled";
+};
+
+&cbass_main {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic500>;
+
+	pcie1_ep: pcie-ep@2910000 {
+		compatible = "ti,j7200-pcie-ep", "ti,j721e-pcie-ep";
+		reg = <0x00 0x02910000 0x00 0x1000>,
+		      <0x00 0x02917000 0x00 0x400>,
+		      <0x00 0x0d800000 0x00 0x00800000>,
+		      <0x00 0x18000000 0x00 0x08000000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+		ti,syscon-pcie-ctrl = <&scm_conf 0x074>;
+		max-link-speed = <3>;
+		num-lanes = <1>;
+		power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 276 41>;
+		clock-names = "fck";
+		max-functions = /bits/ 8 <6>;
+		max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
+		dma-coherent;
+		phys = <&serdes0_pcie_link>;
+		phy-names = "pcie-phy";
+	};
+};