| Message ID | 20231116132619.69500-1-bo.ye@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | cpuidle: idle exit_latency overflow | expand |
Il 16/11/23 14:26, Bo Ye ha scritto: > From: mtk24676 <C.Cheng@mediatek.com> > > In detail: > In kernel-6.1, in the __cpuidle_driver_init function in > driver/cpuidle/driver.c, there is a line of code that causes > an overflow. The line is s->exit_latency_ns = s->exit_latency > * NSEC_PER_USEC. The overflow occurs because the product of an > int type and a constant exceeds the range of the int type. > > In C language, when you perform a multiplication operation, if > both operands are of int type, the multiplication operation is > performed on the int type, and then the result is converted to > the target type. This means that if the product of int type > multiplication exceeds the range that int type can represent, > an overflow will occur even if you store the result in a > variable of int64_t type. > > Signed-off-by: mtk24676 <C.Cheng@mediatek.com> It all makes sense, but "mtk24676" is not the name of a person, what's going on? > Signed-off-by: bo.ye <bo.ye@mediatek.com> That's the same, you perhaps wanted to write "Bo Ye", not "bo.ye". Regards, Angelo > --- > > diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c > index d9cda7f..631ca16 100644 > --- a/drivers/cpuidle/driver.c > +++ b/drivers/cpuidle/driver.c > @@ -187,7 +187,7 @@ > s->target_residency = div_u64(s->target_residency_ns, NSEC_PER_USEC); > > if (s->exit_latency > 0) > - s->exit_latency_ns = s->exit_latency * NSEC_PER_USEC; > + s->exit_latency_ns = (u64)s->exit_latency * NSEC_PER_USEC; > else if (s->exit_latency_ns < 0) > s->exit_latency_ns = 0; > else
On Thu, 2023-11-16 at 15:20 +0100, AngeloGioacchino Del Regno wrote: > Il 16/11/23 14:26, Bo Ye ha scritto: > > From: C Cheng <C.Cheng@mediatek.com> > > > > In detail: > > In kernel-6.1, in the __cpuidle_driver_init function in > > driver/cpuidle/driver.c, there is a line of code that causes > > an overflow. The line is s->exit_latency_ns = s->exit_latency > > * NSEC_PER_USEC. The overflow occurs because the product of an > > int type and a constant exceeds the range of the int type. > > > > In C language, when you perform a multiplication operation, if > > both operands are of int type, the multiplication operation is > > performed on the int type, and then the result is converted to > > the target type. This means that if the product of int type > > multiplication exceeds the range that int type can represent, > > an overflow will occur even if you store the result in a > > variable of int64_t type. > > > > Signed-off-by: C Cheng <C.Cheng@mediatek.com> > > It all makes sense, but "mtk24676" is not the name of a person, > what's going on? Corrected, apologies for any inconvenience caused. > > > Signed-off-by: Bo Ye <bo.ye@mediatek.com> > > That's the same, you perhaps wanted to write "Bo Ye", not "bo.ye". Corrected, apologies for any inconvenience caused. I would greatly appreciate it if you could recommend a formatting checking tool. If there is no auto checking tool, I will pay attention to these formatting checks next time. Best Regards, Bosser > > Regards, > Angelo > > > --- > > > > diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c > > index d9cda7f..631ca16 100644 > > --- a/drivers/cpuidle/driver.c > > +++ b/drivers/cpuidle/driver.c > > @@ -187,7 +187,7 @@ > > s->target_residency = div_u64(s- > > >target_residency_ns, NSEC_PER_USEC); > > > > if (s->exit_latency > 0) > > - s->exit_latency_ns = s->exit_latency * > > NSEC_PER_USEC; > > + s->exit_latency_ns = (u64)s->exit_latency * > > NSEC_PER_USEC; > > else if (s->exit_latency_ns < 0) > > s->exit_latency_ns = 0; > > else > >
On Thu, Nov 16, 2023 at 2:26 PM Bo Ye <bo.ye@mediatek.com> wrote: > > From: mtk24676 <C.Cheng@mediatek.com> > > In detail: > In kernel-6.1, in the __cpuidle_driver_init function in > driver/cpuidle/driver.c, there is a line of code that causes > an overflow. The line is s->exit_latency_ns = s->exit_latency > * NSEC_PER_USEC. The overflow occurs because the product of an > int type and a constant exceeds the range of the int type. In general, but does it actually occur in that code? IOW, is there any system for which the exit latency of an idle state is so large that it will trigger the overflow, for example? > In C language, when you perform a multiplication operation, if > both operands are of int type, the multiplication operation is > performed on the int type, and then the result is converted to > the target type. Right, that's how C works. > This means that if the product of int type > multiplication exceeds the range that int type can represent, > an overflow will occur even if you store the result in a > variable of int64_t type. True. However, does this really happen in the particular case at hand? If not, it would be better to say something like "For a multiplication of two int values, it is better to use mul_u32_u32() that prevents overflows from occurring." > Signed-off-by: mtk24676 <C.Cheng@mediatek.com> > Signed-off-by: bo.ye <bo.ye@mediatek.com> > --- > > diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c > index d9cda7f..631ca16 100644 > --- a/drivers/cpuidle/driver.c > +++ b/drivers/cpuidle/driver.c > @@ -187,7 +187,7 @@ > s->target_residency = div_u64(s->target_residency_ns, NSEC_PER_USEC); > > if (s->exit_latency > 0) > - s->exit_latency_ns = s->exit_latency * NSEC_PER_USEC; > + s->exit_latency_ns = (u64)s->exit_latency * NSEC_PER_USEC; mul_u32_u32()/? > else if (s->exit_latency_ns < 0) > s->exit_latency_ns = 0; > else
diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c index d9cda7f..631ca16 100644 --- a/drivers/cpuidle/driver.c +++ b/drivers/cpuidle/driver.c @@ -187,7 +187,7 @@ s->target_residency = div_u64(s->target_residency_ns, NSEC_PER_USEC); if (s->exit_latency > 0) - s->exit_latency_ns = s->exit_latency * NSEC_PER_USEC; + s->exit_latency_ns = (u64)s->exit_latency * NSEC_PER_USEC; else if (s->exit_latency_ns < 0) s->exit_latency_ns = 0; else