@@ -250,3 +250,61 @@ &usb20_otg {
&wdt {
status = "okay";
};
+
+&gpio0 {
+ gpio-line-names =
+ /* GPIO0_A0 - A7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO0_B0 - B7 */
+ "", "", "", "header1-pin3 [GPIO0_B3]", "header1-pin5 [GPIO0_B4]",
+ "", "", "header1-pin11 [GPIO0_B7]",
+ /* GPIO0_C0 - C7 */
+ "header1-pin13 [GPIO0_C0]", "header1-pin15 [GPIO0_C1]", "", "", "",
+ "", "", "",
+ /* GPIO0_D0 - D8 */
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio1 {
+ gpio-line-names =
+ /* GPIO1_A0 - A7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO1_B0 - B7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO1_C0 - C7 */
+ "", "", "", "", "", "", "header1-pin21 [GPIO1_C6]",
+ "header1-pin19 [GPIO1_C7]",
+ /* GPIO1_D0 - D8 */
+ "header1-pin23 [GPIO1_D0]", "header1-pin24 [GPIO1_D1]", "", "", "",
+ "", "", "";
+};
+
+&gpio2 {
+ gpio-line-names =
+ /* GPIO2_A0 - A7 */
+ "header1-pin10 [GPIO2_A0]", "header1-pin8 [GPIO2_A1]", "", "",
+ "header1-pin7 [GPIO2_A4]", "header1-pin12 [GPIO2_A5]",
+ "header2-pin46 [GPIO2_A6]", "header1-pin22 [GPIO1_A7]",
+ /* GPIO2_B0 - B7 */
+ "header2-pin45 [GPIO2_B0]", "header1-pin18 [GPIO2_B1]",
+ "header1-pin16 [GPIO2_B2]", "header2-pin44 [GPIO2_B3]",
+ "header2-pin43 [GPIO2_B4]", "header2-pin28 [GPIO2_B5]",
+ "header2-pin30 [GPIO2_B6]", "header2-pin32 [GPIO2_B7]",
+ /* GPIO2_C0 - C7 */
+ "header2-pin34 [GPIO2_C0]", "", "", "", "", "", "", "",
+ /* GPIO2_D0 - D8 */
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+ gpio-line-names =
+ /* GPIO3_A0 - A7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO3_B0 - B7 */
+ "", "", "header2-pin42 [GPIO3_B2]", "header2-pin41 [GPIO3_B3]",
+ "header2-pin40 [GPIO3_B4]", "header2-pin39 [GPIO3_B5]", "", "",
+ /* GPIO3_C0 - C7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO3_D0 - D8 */
+ "", "", "", "", "", "", "", "";
+};
Add names to the pins of the general-purpose expansion header as given in the Radxa GPIO page[1] following the conventions in the kernel documentation[2] to make it easier for users to correlate the pins with functions when using utilities such as gpioinfo. [1] https://wiki.radxa.com/RockpiS/hardware/gpio [2] Documentation/devicetree/bindings/gpio/gpio.txt Signed-off-by: Trevor Woerner <twoerner@gmail.com> --- .../boot/dts/rockchip/rk3308-rock-pi-s.dts | 58 +++++++++++++++++++ 1 file changed, 58 insertions(+)