Message ID | 20231130225242.988336-1-festevam@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | arm64: dts: imx8mm-venice-gw7: Adjust PCI Ethernet nodes | expand |
On Thu, Nov 30, 2023 at 07:52:42PM -0300, Fabio Estevam wrote: > From: Fabio Estevam <festevam@denx.de> > > As per Rob Herring's feedback: > > "The ethernet device should have a node name of > 'ethernet'. The 'pcie' node name and 'device_type = "pci"' is for PCI > buses/bridges only." > > Do it as suggested. > > Fixes: d61c5068729a ("arm64: dts: imx8mm-venice-gw7: Fix pci sub-nodes") > Suggested-by: Rob Herring <robh@kernel.org> > Signed-off-by: Fabio Estevam <festevam@denx.de> Applied, thanks!
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi index a337e8f20441..3f3f2a2c89cd 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi @@ -178,9 +178,8 @@ pcie@3,0 { #size-cells = <2>; ranges; - eth1: pcie@0,0 { + eth1: ethernet@0,0 { reg = <0x0000 0 0 0 0>; - device_type = "pci"; #address-cells = <3>; #size-cells = <2>; ranges; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi index 2247d1c4e2af..06fed9376996 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi @@ -198,9 +198,8 @@ pcie@4,0 { #size-cells = <2>; ranges; - eth1: pcie@0,0 { + eth1: ethernet@0,0 { reg = <0x0000 0 0 0 0>; - device_type = "pci"; #address-cells = <3>; #size-cells = <2>; ranges; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts index 7ef17c2b0e9d..c11260c26d0b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts @@ -640,9 +640,8 @@ pcie@0,0 { #size-cells = <2>; ranges; - eth1: pcie@0,0 { + eth1: ethernet@0,0 { reg = <0x0000 0 0 0 0>; - device_type = "pci"; #address-cells = <3>; #size-cells = <2>; ranges;