diff mbox series

[4/6] ARM: dts: imx27-phytec-phycore-rdk: Move usbphy nodes out of simple-bus

Message ID 20231206150023.2305685-4-festevam@gmail.com (mailing list archive)
State New, archived
Headers show
Series [1/6] ARM: dts: imx27: Use 'bus' for AIPI bus | expand

Commit Message

Fabio Estevam Dec. 6, 2023, 3 p.m. UTC 
From: Fabio Estevam <festevam@denx.de>

The USB PHY nodes should not be described under 'simple-bus'.

Move it out of simple-bus.

Signed-off-by: Fabio Estevam <festevam@denx.de>
---
 .../dts/nxp/imx/imx27-phytec-phycore-rdk.dts  | 15 ++++++--------
 .../dts/nxp/imx/imx27-phytec-phycore-som.dtsi | 20 +++++++------------
 2 files changed, 13 insertions(+), 22 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
index 7f0cd4d3ec2d..b7df7f20ec04 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
@@ -48,15 +48,12 @@  regulator-2 {
 		regulator-always-on;
 	};
 
-	usbphy {
-		usbphy2: usbphy@2 {
-			compatible = "usb-nop-xceiv";
-			reg = <2>;
-			vcc-supply = <&reg_5v0>;
-			clocks = <&clks IMX27_CLK_DUMMY>;
-			clock-names = "main_clk";
-			#phy-cells = <0>;
-		};
+	usbphy2: usbphy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_5v0>;
+		clocks = <&clks IMX27_CLK_DUMMY>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
index dc316358a7d4..0e527d1f9e55 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
@@ -29,19 +29,13 @@  reg_5v0: regulator-1 {
 		regulator-max-microvolt = <5000000>;
 	};
 
-	usbphy {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbphy0: usbphy@0 {
-			compatible = "usb-nop-xceiv";
-			reg = <0>;
-			vcc-supply = <&sw3_reg>;
-			clocks = <&clks IMX27_CLK_DUMMY>;
-			clock-names = "main_clk";
-			#phy-cells = <0>;
-		};
+
+	usbphy0: usbphy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&sw3_reg>;
+		clocks = <&clks IMX27_CLK_DUMMY>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
 	};
 };