diff mbox series

[1/2] arm64: dts: imx8mm-evk: Move port under USB connector

Message ID 20231207155842.2645290-1-festevam@gmail.com (mailing list archive)
State New, archived
Headers show
Series [1/2] arm64: dts: imx8mm-evk: Move port under USB connector | expand

Commit Message

Fabio Estevam Dec. 7, 2023, 3:58 p.m. UTC 
From: Fabio Estevam <festevam@denx.de>

Per nxp,ptn5110.yaml, 'port' should be placed under 'connector'.

Do as requested to fix the following dt-schema warning:

imx8mm-evkb.dtb: tcpc@50: 'port' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/usb/nxp,ptn5110.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
---
 arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

Comments

Shawn Guo Dec. 14, 2023, 2:51 a.m. UTC | #1 
On Thu, Dec 07, 2023 at 12:58:41PM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <festevam@denx.de>
> 
> Per nxp,ptn5110.yaml, 'port' should be placed under 'connector'.
> 
> Do as requested to fix the following dt-schema warning:
> 
> imx8mm-evkb.dtb: tcpc@50: 'port' does not match any of the regexes: 'pinctrl-[0-9]+'
> 	from schema $id: http://devicetree.org/schemas/usb/nxp,ptn5110.yaml#
> 
> Signed-off-by: Fabio Estevam <festevam@denx.de>

Applied both, thanks!
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index a882c86ec313..b53104ed8919 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -367,12 +367,6 @@  ptn5110: tcpc@50 {
 		interrupts = <11 8>;
 		status = "okay";
 
-		port {
-			typec1_dr_sw: endpoint {
-				remote-endpoint = <&usb1_drd_sw>;
-			};
-		};
-
 		typec1_con: connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
@@ -384,6 +378,12 @@  typec1_con: connector {
 				     PDO_VAR(5000, 20000, 3000)>;
 			op-sink-microwatt = <15000000>;
 			self-powered;
+
+			port {
+				typec1_dr_sw: endpoint {
+					remote-endpoint = <&usb1_drd_sw>;
+				};
+			};
 		};
 	};
 };