| Message ID | 20231215073431.8512-2-chunfeng.yun@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2,1/3] dt-bindings: usb: mtk-xhci: add a property for Gen1 isoc-in transfer issue | expand |
On Fri, Dec 15, 2023 at 03:34:30PM +0800, Chunfeng Yun wrote: > For Gen1 isoc-in transfer, host still send out unexpected ACK after device > finish the burst with a short packet, this will cause an exception on the > connected device, such as, a usb 4k camera. > It can be fixed by setting rxfifo depth less than 3, prefer to use 2 here, > the side-effect is that may cause performance drop about 10%, including > bulk transfer. > > Fixes: 926d60ae64a6 ("usb: xhci-mtk: modify the SOF/ITP interval for mt8195") > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> > --- > v2: > use 'rx-fifo-depth' property; > add header file 'linux/bitfield.h' to avoid building error on some ARCH; > --- Hi, This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him a patch that has triggered this response. He used to manually respond to these common problems, but in order to save his sanity (he kept writing the same thing over and over, yet to different people), I was created. Hopefully you will not take offence and will fix the problem in your patch and resubmit it so that it can be accepted into the Linux kernel tree. You are receiving this message because of the following common error(s) as indicated below: - You have marked a patch with a "Fixes:" tag for a commit that is in an older released kernel, yet you do not have a cc: stable line in the signed-off-by area at all, which means that the patch will not be applied to any older kernel releases. To properly fix this, please follow the documented rules in the Documentation/process/stable-kernel-rules.rst file for how to resolve this. If you wish to discuss this problem further, or you have questions about how to resolve this issue, please feel free to respond to this email and Greg will reply once he has dug out from the pending patches received from other developers. thanks, greg k-h's patch email bot
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c index bbdf1b0b7be1..dad6c9873d79 100644 --- a/drivers/usb/host/xhci-mtk.c +++ b/drivers/usb/host/xhci-mtk.c @@ -7,6 +7,7 @@ * Chunfeng Yun <chunfeng.yun@mediatek.com> */ +#include <linux/bitfield.h> #include <linux/dma-mapping.h> #include <linux/iopoll.h> #include <linux/kernel.h> @@ -73,6 +74,9 @@ #define FRMCNT_LEV1_RANG (0x12b << 8) #define FRMCNT_LEV1_RANG_MASK GENMASK(19, 8) +#define HSCH_CFG1 0x960 +#define SCH3_RXFIFO_DEPTH_MASK GENMASK(21, 20) + #define SS_GEN2_EOF_CFG 0x990 #define SSG2EOF_OFFSET 0x3c @@ -165,6 +169,34 @@ static void xhci_mtk_set_frame_interval(struct xhci_hcd_mtk *mtk) writel(value, hcd->regs + SS_GEN2_EOF_CFG); } +/* + * workaround: usb3.2 gen1 isoc rx hw issue + * host send out unexpected ACK afer device fininsh a burst transfer with + * a short packet. + */ +static void xhci_mtk_rxfifo_depth_set(struct xhci_hcd_mtk *mtk) +{ + struct usb_hcd *hcd = mtk->hcd; + u32 value; + + if (mtk->rxfifo_depth < 0) + return; + + value = readl(hcd->regs + HSCH_CFG1); + value &= ~SCH3_RXFIFO_DEPTH_MASK; + value |= FIELD_PREP(SCH3_RXFIFO_DEPTH_MASK, mtk->rxfifo_depth); + writel(value, hcd->regs + HSCH_CFG1); +} + +static void xhci_mtk_init_quirk(struct xhci_hcd_mtk *mtk) +{ + /* workaround only for mt8195 */ + xhci_mtk_set_frame_interval(mtk); + + /* workaround for SoCs using SSUSB about before IPM v1.6.0 */ + xhci_mtk_rxfifo_depth_set(mtk); +} + static int xhci_mtk_host_enable(struct xhci_hcd_mtk *mtk) { struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs; @@ -448,8 +480,7 @@ static int xhci_mtk_setup(struct usb_hcd *hcd) if (ret) return ret; - /* workaround only for mt8195 */ - xhci_mtk_set_frame_interval(mtk); + xhci_mtk_init_quirk(mtk); } ret = xhci_gen_setup(hcd, xhci_mtk_quirks); @@ -527,6 +558,9 @@ static int xhci_mtk_probe(struct platform_device *pdev) of_property_read_u32(node, "mediatek,u2p-dis-msk", &mtk->u2p_dis_msk); + mtk->rxfifo_depth = -1; + of_property_read_u32(node, "rx-fifo-depth", &mtk->rxfifo_depth); + ret = usb_wakeup_of_property_parse(mtk, node); if (ret) { dev_err(dev, "failed to parse uwk property\n"); diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h index 39f7ae7d3087..2d27bb0d3ecb 100644 --- a/drivers/usb/host/xhci-mtk.h +++ b/drivers/usb/host/xhci-mtk.h @@ -171,6 +171,8 @@ struct xhci_hcd_mtk { struct regmap *uwk; u32 uwk_reg_base; u32 uwk_vers; + + int rxfifo_depth; }; static inline struct xhci_hcd_mtk *hcd_to_mtk(struct usb_hcd *hcd)
For Gen1 isoc-in transfer, host still send out unexpected ACK after device finish the burst with a short packet, this will cause an exception on the connected device, such as, a usb 4k camera. It can be fixed by setting rxfifo depth less than 3, prefer to use 2 here, the side-effect is that may cause performance drop about 10%, including bulk transfer. Fixes: 926d60ae64a6 ("usb: xhci-mtk: modify the SOF/ITP interval for mt8195") Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> --- v2: use 'rx-fifo-depth' property; add header file 'linux/bitfield.h' to avoid building error on some ARCH; --- drivers/usb/host/xhci-mtk.c | 38 +++++++++++++++++++++++++++++++++++-- drivers/usb/host/xhci-mtk.h | 2 ++ 2 files changed, 38 insertions(+), 2 deletions(-)