diff mbox series

[v4,1/9] dt-bindings: net: starfive,jh7110-dwmac: Drop redundant reset description

Message ID 20231218214451.2345691-2-cristian.ciocaltea@collabora.com (mailing list archive)
State New, archived
Headers show
Series Enable networking support for StarFive JH7100 SoC | expand

Commit Message

Cristian Ciocaltea Dec. 18, 2023, 9:44 p.m. UTC
The reset description items are already provided by the referenced
snps,dwmac.yaml schema, hence replace them with the necessary
{min,max}Items.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
 .../devicetree/bindings/net/starfive,jh7110-dwmac.yaml       | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

Comments

Krzysztof Kozlowski Dec. 19, 2023, 7:24 a.m. UTC | #1
On 18/12/2023 22:44, Cristian Ciocaltea wrote:
> The reset description items are already provided by the referenced
> snps,dwmac.yaml schema, hence replace them with the necessary
> {min,max}Items.
> 
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
> ---
>  .../devicetree/bindings/net/starfive,jh7110-dwmac.yaml       | 5 ++---
>  1 file changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml b/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
> index 5e7cfbbebce6..d90cb82c1424 100644
> --- a/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
> +++ b/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
> @@ -55,9 +55,8 @@ properties:
>      maxItems: 3
>  
>    resets:
> -    items:
> -      - description: MAC Reset signal.
> -      - description: AHB Reset signal.
> +    minItems: 2
> +    maxItems: 2

Why changing only resets, but not reset-names?

Best regards,
Krzysztof
Cristian Ciocaltea Dec. 19, 2023, 12:55 p.m. UTC | #2
On 12/19/23 09:24, Krzysztof Kozlowski wrote:
> On 18/12/2023 22:44, Cristian Ciocaltea wrote:
>> The reset description items are already provided by the referenced
>> snps,dwmac.yaml schema, hence replace them with the necessary
>> {min,max}Items.
>>
>> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
>> ---
>>  .../devicetree/bindings/net/starfive,jh7110-dwmac.yaml       | 5 ++---
>>  1 file changed, 2 insertions(+), 3 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml b/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
>> index 5e7cfbbebce6..d90cb82c1424 100644
>> --- a/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
>> +++ b/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
>> @@ -55,9 +55,8 @@ properties:
>>      maxItems: 3
>>  
>>    resets:
>> -    items:
>> -      - description: MAC Reset signal.
>> -      - description: AHB Reset signal.
>> +    minItems: 2
>> +    maxItems: 2
> 
> Why changing only resets, but not reset-names?

Already answered in [1], but also discussed in the context of the 
next patch.

Thanks,
Cristian

[1]: https://lore.kernel.org/lkml/0ff7a905-d8f2-401b-a0ff-47947d12ce05@collabora.com/
Krzysztof Kozlowski Dec. 19, 2023, 1:22 p.m. UTC | #3
On 19/12/2023 13:55, Cristian Ciocaltea wrote:
> On 12/19/23 09:24, Krzysztof Kozlowski wrote:
>> On 18/12/2023 22:44, Cristian Ciocaltea wrote:
>>> The reset description items are already provided by the referenced
>>> snps,dwmac.yaml schema, hence replace them with the necessary
>>> {min,max}Items.
>>>
>>> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
>>> ---
>>>  .../devicetree/bindings/net/starfive,jh7110-dwmac.yaml       | 5 ++---
>>>  1 file changed, 2 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml b/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
>>> index 5e7cfbbebce6..d90cb82c1424 100644
>>> --- a/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
>>> +++ b/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
>>> @@ -55,9 +55,8 @@ properties:
>>>      maxItems: 3
>>>  
>>>    resets:
>>> -    items:
>>> -      - description: MAC Reset signal.
>>> -      - description: AHB Reset signal.
>>> +    minItems: 2
>>> +    maxItems: 2
>>
>> Why changing only resets, but not reset-names?
> 
> Already answered in [1], but also discussed in the context of the 
> next patch.
> 
> Thanks,
> Cristian
> 
> [1]: https://lore.kernel.org/lkml/0ff7a905-d8f2-401b-a0ff-47947d12ce05@collabora.com/

Neither previous answer nor this is correct. snps,dwmac does not allow
ahb entry alone.

NAK

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml b/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
index 5e7cfbbebce6..d90cb82c1424 100644
--- a/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
@@ -55,9 +55,8 @@  properties:
     maxItems: 3
 
   resets:
-    items:
-      - description: MAC Reset signal.
-      - description: AHB Reset signal.
+    minItems: 2
+    maxItems: 2
 
   reset-names:
     items: