diff mbox series

[RFC,net-next,6/8] net: ti: icssg-ethtool: Adjust channel count for SR1.0

Message ID 20231219174548.3481-7-diogo.ivo@siemens.com (mailing list archive)
State New, archived
Headers show
Series Add support for ICSSG-based Ethernet on SR1.0 devices | expand

Commit Message

Diogo Ivo Dec. 19, 2023, 5:45 p.m. UTC 
SR1.0 uses the highest priority channel to transmit control
messages to the firmware. Take this into account when computing
channels.

Based on the work of Roger Quadros in TI's 5.10 SDK [1].

[1]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/tree/?h=ti-linux-5.10.y

Co-developed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
---
 drivers/net/ethernet/ti/icssg/icssg_ethtool.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/ti/icssg/icssg_ethtool.c b/drivers/net/ethernet/ti/icssg/icssg_ethtool.c
index a27ec1dcc8d5..29e67526fa22 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_ethtool.c
+++ b/drivers/net/ethernet/ti/icssg/icssg_ethtool.c
@@ -141,6 +141,9 @@  static int emac_set_channels(struct net_device *ndev,
 		return -EBUSY;
 
 	emac->tx_ch_num = ch->tx_count;
+	/* highest channel number for management messaging on SR1 */
+	if (emac->is_sr1)
+		emac->tx_ch_num++;
 
 	return 0;
 }
@@ -151,9 +154,12 @@  static void emac_get_channels(struct net_device *ndev,
 	struct prueth_emac *emac = netdev_priv(ndev);
 
 	ch->max_rx = 1;
-	ch->max_tx = PRUETH_MAX_TX_QUEUES;
+	/* SR1 use high priority channel for management messages */
+	ch->max_tx = emac->is_sr1 ? PRUETH_MAX_TX_QUEUES - 1 :
+				    PRUETH_MAX_TX_QUEUES;
 	ch->rx_count = 1;
-	ch->tx_count = emac->tx_ch_num;
+	ch->tx_count = emac->is_sr1 ? emac->tx_ch_num - 1 :
+				      emac->tx_ch_num;
 }
 
 static const struct ethtool_rmon_hist_range emac_rmon_ranges[] = {