Message ID | 20240106202650.22310-1-alchark@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | arm64: dts: rockchip: add rfkill node for M.2 Key E WiFi on rock-5b | expand |
On Sun, 7 Jan 2024 00:26:45 +0400, Alexey Charkov wrote: > By default the GPIO pin that connects to the WiFi enable signal > inside the M.2 Key E slot is driven low, resulting in impossibility > to connect to any network. Add a DT node to expose it as an RFKILL > device, which lets the WiFi driver or userspace toggle it as > required. > > > [...] Applied, thanks! [1/1] arm64: dts: rockchip: add rfkill node for M.2 Key E WiFi on rock-5b commit: 82d40b141a4c7ab6608a84a5ce0c58b747cb7163 Best regards,
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts index 741f631db345..a5a104131403 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts @@ -59,6 +59,13 @@ fan: pwm-fan { #cooling-cells = <2>; }; + rfkill { + compatible = "rfkill-gpio"; + label = "rfkill-pcie-wlan"; + radio-type = "wlan"; + shutdown-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; + }; + vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0-regulator { compatible = "regulator-fixed"; enable-active-high;
By default the GPIO pin that connects to the WiFi enable signal inside the M.2 Key E slot is driven low, resulting in impossibility to connect to any network. Add a DT node to expose it as an RFKILL device, which lets the WiFi driver or userspace toggle it as required. Signed-off-by: Alexey Charkov <alchark@gmail.com> --- arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts | 7 +++++++ 1 file changed, 7 insertions(+)